journal article·2018-03

The effect of hole transfer layers and anodes on indium-free TiO2/Ag/TiO2 electrode and ITO electrode based P3HT:PCBM organic solar cells

Zhao Zhao, T.L. Alford

Publisher page

Abstract

Abstract Transparent composite electrodes (TCE), TiO2/Ag/TiO2 (TAgT), have been demonstrated as a promising alternative of indium tin oxide (ITO) in organic solar cell application. TiO2/Ag/TiO2 have been incorporated into bulk heterojunction organic solar cells (OSCs) to replace ITO as the anode. Two different hole transfer layers (HTL), poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) and MoO3, are compared in terms of their compatibility with the TiO2/Ag/TiO2 anode. The MoO3 layer has been shown to be a beneficial HTL for TiO2/Ag/TiO2 based OSC. However, the wettability of MoO3 for polymer blend is not as good as PEDOT:PSS, and results in a relatively thin active layer in OSCs. On the other hand, ITO based OSCs using PEDOT:PSS and MoO3 as the HTL are fabricated as control samples to compare the performance of TAgT and ITO anodes. Results of the investigation shows that the superior electrical property of TAgT anodes contributes to the effective collection of photo-carriers and its lower optical transmittance barely degrades the light absorption in OSCs. In a few words, the higher Haacke figure of merit of TAgT enables better performance of OSCs with MoO3 HTL, in comparison with ITO based OSC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Conduction and transmission analysis in gold nanolayers embedded in zinc oxide for flexible electronics10.1063/1.3435467 ↗
2. High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputtering10.1063/1.4808438 ↗
3. Optimization of Nb2O5/Ag/Nb2O5 multilayers as transparent composite electrode on flexible substrate with high figure of merit10.1063/1.4767662 ↗
4. Enhancement of light extraction efficiency of organic light emitting diodes using nanostructured indium tin oxide10.1364/OL.37.000575 ↗
5. Effect of gold thickness and annealing on optical and electrical properties of TiO2/Au/TiO2 multilayers as transparent composite electrode on flexible substrate10.1007/s11837-015-1346-3 ↗
6. Design of dielectric/metal/dielectric transparent electrodes for flexible electronics10.1117/1.JPE.2.021215 ↗
7. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
8. ITO/Ag/ITO multilayer-based transparent conductive electrodes for ultraviolet light-emitting diodes10.1364/OL.38.005055 ↗
9. Structure, optical and electrical properties of Al:ZnO thin films deposited by DC sputtering at room temperature on glass and plastic substrates
10. ZnO/Ag/ZnO multilayer films for the application of a very low resistance transparent electrode10.1016/j.apsusc.2005.09.021 ↗
11. Optimization of IGZO/Cu/IGZO multilayers as transparent composite electrode on flexible substrate by room-temperature sputtering and post-deposition anneals10.1557/opl.2013.661 ↗
12. Effect of different substrates on the wettability and electrical properties of Au thin films deposited by sputtering10.1007/s11837-015-1347-2 ↗
13. Comparison of electrical, optical, structural, and interface properties of IZO-Ag-IZO and IZO-Au-IZO multilayer electrodes for organic photovoltaics10.1063/1.3294605 ↗
14. Optimization of TiO2/Cu/TiO2 multilayer as transparent composite electrode (TCE) deposited on flexible substrate at room temperature10.1149/2.0061411ssl ↗
15. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
16. Investigation of low resistance transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
17. Deposition and optical properties of optimised ZnS/Ag/ZnS thin films for energy saving applications10.1016/S0040-6090(97)00250-2 ↗
18. The optimal TiO 2/Ag/TiO 2 electrode for organic solar cell application with high device-specific Haacke figure of merit10.1016/j.solmat.2016.07.044 ↗
19. Interface materials for organic solar cells10.1039/b921624c ↗
20. Choy · 2013
21. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗
22. Interface investigation and engineering–achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
23. Electron and hole transport layers: their use in inverted bulk heterojunction polymer solar cells10.3390/electronics3010132 ↗
24. The effect of molybdenum oxide interlayer on organic photovoltaic cells
25. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
26. Enhanced extraction rates through gap states of molybdenum oxide anode buffer10.1021/jp3114013 ↗
27. Origin of hole selectivity and the role of defects in low-temperature solution-processed molybdenum oxide interfacial layer for organic solar cells10.1021/jp303679y ↗
28. Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
29. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
30. Series resistance in organic bulk-heterojunction solar devices: modulating carrier transport with fullerene electron traps10.1016/j.orgel.2012.06.043 ↗
31. Achieving a high fill factor for organic solar cells10.1039/C6TA00126B ↗
32. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
33. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
34. Metal oxide induced charge transfer doping and band alignment of graphene electrodes for efficient organic light emitting diodes10.1038/srep05380 ↗
35. Soft X-ray spectroscopy of C60/copper phthalocyanine/MoO3 interfaces: role of reduced MoO3 on energetic band alignment and improved performance10.1021/jp1071428 ↗
36. Improved efficiency of P3HT: PCBM solar cells by incorporation of silver oxide interfacial layer10.1063/1.4891246 ↗
37. Organic solar cells: an overview
38. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
39. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗