Sensitivity analysis of current generation in organic solar cells—comparing bilayer, sawtooth, and bulk heterojunction morphologies
Source abstract
Abstract
Abstract Organic solar cells (OSC) show great potential as a low-cost energy source. In addition, their mechanical flexibility allows the added advantage of use on a wide variety of surfaces. In recent years, progress in experimental strategies and modeling approaches have enabled enhancing the power conversion efficiencies of OSC. In particular, simulation based analysis has played a significant role in improving our understanding of the charge transport phenomena in the active layer of these devices. The excitonic drift-diffusion (EDD) model has been used widely to simulate the generation and transport properties of bulk heterojunction (BHJ) solar cells. The EDD model – which is derived from the Boltzmann transport is dependent on a number of input parameters such as (1) material properties (mobility and permittivity), (2) operating conditions (illumination and device thickness), and (3) active layer morphology. A comprehensive sensitivity analysis of the short-circuit current, Jsc, to the input parameters is performed. This helps in rank ordering the input parameters and operating conditions – by strength and relevance – on their impact on Jsc. We particularly focus our investigations on understanding how the active layer morphology affects the sensitivity of Jsc. To accomplish this we analyze three classes of morphologies: bilayer, BHJ, and sawtooth. The results show significant differences in sensitivities between BHJ, sawtooth, and bilayer morphologies. Short-circuit current in BHJ structure shows higher sensitivity to material properties than either sawtooth and bilayer structure, suggesting that the necessity for finer control of material properties to counteract the increased disorder in the active layer morphology. The electrode current is found to be most sensitive to illumination intensity for all three morphologies. We report some interesting trends that may help choose the most sensitive parameters to vary for designing OSC's with better performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. F.C. Krebs, Fabrication and processing of polymer solar cells: a review of printing and coating techniques, Solar Energy Materials and Solar Cells (93) (2009) 394–412.10.1016/j.solmat.2008.10.004 ↗
2. Konarka technologies advances award winning power plastic solar cell efficiency with 9% certification, (February (28)) (2012) 〈http://www.konarka.com/index.php/site/pressreleasedetail/konarka_technologies_advances_award_winning_power_plastic_solar_cell_effici〉. Accessed on the Jan 04 2013.
3. Device optimization in PCPDTBT10.1016/j.solmat.2010.01.022 ↗
4. Computer simulation of polymer solar cells
5. Computer simulation of heterogeneous polymer photovoltaic devices10.1088/0965-0393/20/3/035015 ↗
6. O. Wodo, S. Tirthapura, S. Chaudhary, B. Ganapathysubramanian, A novel graph based formulation for characterizing morphology with application to organic solar cells, Organic Electronics, 13 (2012) 1105–111310.1016/j.orgel.2012.03.007 ↗
7. Kanwar S. Nalwa, John A. Carr, Rakesh C. Mahadevapuram, Hari K. Kodali, Sayantan Bose, Yuqing Chen, Jacob W. Petrich, Baskar Ganapathysubramanian, and Sumit Chaudhary, Enhanced charge separation in organic photovoltaic films doped with ferroelectric dipoles, Energy & Environmental Science 5 (2012) 7042–704910.1039/c2ee03478f ↗
8. Dependence of recombination mechanisms and strength on processing conditions in polymer solar cells10.1063/1.3671999 ↗
9. Dynamical monte carlo modelling of organic solar cells10.1021/nl051098o ↗
10. A microscopic model for the behaviour of nanostructured organic photovoltaic devices10.1063/1.2718865 ↗
11. Influence of nanoscale phase separation on the charge generation dynamics and photovoltaic performance of conjugated polymer blends10.1021/jp075904m ↗
12. Modeling the current–voltage characteristics of bilayer polymer photovoltaic devices
13. Predicting structure and property relations in polymeric photovoltaic devices
14. Random vs regularized OPV10.1016/j.solmat.2011.11.042 ↗
15. A numerical model for explaining the role of the interface morphology in composite solar cells10.1063/1.2817603 ↗
16. Two-dimensional simulations of bulk heterojunction solar cell characteristics10.1088/0957-4484/19/42/424011 ↗
17. Correlations between morphologies and photovoltaic properties of rod-coil block copolymers10.1021/ma9020467 ↗
18. The role of sensitivity analysis in ecological modelling10.1016/j.ecolmodel.2005.10.045 ↗
19. Sensitivity analysis for chemical models10.1021/cr040659d ↗
20. E.J. Haug, K.K. Choi, V. Komkov, Design Sensitivity Analysis of Structural Systems, 1986.10.1007/978-3-642-83051-8_22 ↗
21. Sensitivity analysis of pharmacokinetic and pharmacodynamic systems10.1023/A:1020926525495 ↗
22. Adjoint sensitivity analysis for fluid flow with free surface10.1002/fld.883 ↗
23. Coupled optoelectronic simulation of organic bulk-heterojunction solar cells: parameter extraction and sensitivity analysis10.1063/1.3259367 ↗
24. Recent progress in polymer solar cells10.1002/adma.200802854 ↗
25. “Plastic” solar cells10.1021/ar900065j ↗
26. Heterogeneity in polymer solar cells10.1021/ar900231q ↗
27. Veronique S. Gevaerts, L. Jan Anton Koster, Martijn M. Wienk, Rene A. J. Janssen, Discriminating between bilayer and bulk heterojunction polymer:fullerene solar cells using the external quantum efficiency. ACS Applied Materials & Interfaces, August 2011, pp. 12–15.10.1021/am200755m ↗
28. Organic bulk-heterojunction solar cells10.1109/JSTQE.2010.2048892 ↗
29. A.L. Fahrenbruch, R.H. Bube, Fundamentals of Solar Cells, 1983.10.1016/B978-0-12-247680-8.50013-X ↗
30. Electric-field-independent electron mobilities in anthracene10.1016/0009-2614(83)87258-3 ↗
31. Charge transport in organic semiconductors10.1021/cr050140x ↗
32. Hari K. Kodali, Baskar Ganapathysubramanian, A computational framework to investigate charge transport in heterogeneous organic photovoltaic devices, Computer Methods in Applied Mechanics and Engineering 247–248 (2012) 113–12910.1016/j.cma.2012.08.012 ↗