Induction melting process using segmented graphite crucible for silicon melting
Source abstract
Abstract
Induction melting process using segmented graphite crucible was investigated to melt silicon feedstock for solar cells. Induction melting is the key technology used in silicon melting process, such as ingot-growing, metallurgical refining and ribbon production. However, contamination of silicon from the crucible in induction melting is the main source of degrading the silicon. In this paper, new structure of crucible was suggested to minimize the contamination from the crucible wall. It was the segmentation of graphite crucible wall that introduced the non-contact between melt and inner wall of crucible. Numerical and experimental studies of induction melting process of silicon using the suggested crucible were conducted. For numerical analysis, 3D models of crucible, induction coil and silicon were constructed and electromagnetic force and temperature distribution in silicon and crucible were calculated. To evaluate a process with the suggested crucible, induction melting system was built up based on the simulated results and experiments of silicon melting were carried out.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A. Muhlbauer, Innovative induction technologies: a historical review, Modelling for Material Processing (2006) 8–9.
2. Experimental and numerical study of the cold crucible melting process10.1016/j.apm.2006.03.003 ↗
3. High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles10.1016/j.jallcom.2004.05.002 ↗
4. A. Choudhury, M. Blum, Economical production of titanium–aluminide automative valves using cold wall induction melting and centrifugal casting in a permanent mold, Vacuum 47 (1996) 829–83110.1016/0042-207X(96)00076-0 ↗
5. A. Choudhury, M. Blum, H. Scholz, G. Jarzcyk, P. Busse, Quality assessment of centrifugally cast titanium–aluminide automotive valves in a permanent mould, in: Proceedings of the International Symposium on Liquid Metal Processing and Casting, Santa Fe, 1999, pp. 244–249.
6. A. Choudhury, M. Blum, H. Scholz, G. Jarzcyk, P. Busse, G. Frommeyer, S. Kniooscher, Properties of low-cost TiAl automotive valves produced by cols wall induction melting and permanent mold centrifugal casting, in: Proceedings of the International Symposium on Gamma Titanium Aluminides, The Minerals, Metals, Metals & Materials Soc. (TMS), SanDiego, 1999, pp. 35–39.
7. M. Blum, H.G. Fellmann, H. Franz, G. Jarczyk, T. Ruppel, P. Busse, K. Segtrop, H.-J. Lauden-berg, Commissioning of a prototype plant for the economical mass production of TiAl-valves, in: Proceedings of the International Symposium on Structural Intermetallics, TMS, Jackson Hole, 2001, pp. 131–135
8. Cold-crucible induction melting of reactive metals
9. Increasing the technical and economic indexes of induction furnaces with a cold crucible
10. D. Delage, R. Ernst, J. Driole, Induction melting in a cold crucible, in: Proceedings of IUTAM Symposium, Cambridge, 1982, pp. 108–119
11. Three-dimensional CZ silicon melt flow under induction heating10.1016/j.jcrysgro.2004.11.221 ↗
12. Plasma-refining to provide solar-grade silicon10.1016/S0927-0248(01)00151-9 ↗
13. Comparison of SiC sublimation epitaxial growth in graphite and TaC coated crucibles10.1016/S0925-9635(03)00279-6 ↗
14. Cold crucible electromagnetic casting of silicon
15. Refining of metallurgical-grade silicon by inductive plasma10.1016/S0927-0248(01)00148-9 ↗
16. Purification of silicon by directional solidifications