Influence of the compensation level on the performance of p-type crystalline silicon solar cells: Theoretical calculations and experimental study
Source abstract
Abstract
Abstract We have investigated the influence of the compensation level on the performance of p-type crystalline silicon solar cells by combining theoretical calculations and experiments. With the compensation level increasing, the fraction of ionized boron (B) atoms increases. The hole mobility is significantly reduced due to the increased ionized impurities scattering, while the electron mobility almost keeps constant due to the inverse contributions of ionized impurities scattering and electron–hole scattering. The carrier lifetime in compensated silicon, mainly dominated by high concentration of dopants, could get improved. Correspondingly, the minority carrier diffusion length increases, causing a higher short-circuit current. However, the open-circuit voltage first decreases and then increases with the increase of the compensation level, owing to the competition effect of the reduced net doping concentration and the increased excess carrier concentration. All these factors could finally result in a higher efficiency solar cell. These results suggest that intentional dopant compensation might be utilized for the improvement of solar cell efficiency, which is especially interesting for those based on highly-doped silicon feedstock.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Purification of metallurgical silicon up to solar grade10.1016/0927-0248(94)90046-9 ↗
2. Refining of metallurgical-grade silicon by inductive plasma10.1016/S0927-0248(01)00148-9 ↗
3. Plasma-refining process to provide solar-grade silicon10.1016/S0927-0248(01)00151-9 ↗
4. The purification of metallurgical grade silicon by electron beam melting10.1016/j.jmatprotec.2004.03.035 ↗
5. Purification of metallurgical grade silicon by a solar process10.1016/j.solmat.2006.02.009 ↗
6. New processes for the production of solar-grade polycrystalline silicon: a review10.1016/j.solmat.2007.10.003 ↗
7. Electron and hole mobility reduction and hall factor in phosphorus-compensated p-type silicon10.1063/1.3456076 ↗
8. Transport properties of p-type compensated silicon at room temperature10.1002/pip.1036 ↗
9. Effect of the compensation level on the carrier lifetime of crystalline silicon10.1063/1.2961030 ↗
10. Recombination in compensated crystalline silicon for solar cells10.1063/1.3555588 ↗
11. Effect of compensation and of metallic impurities on the electrical properties of CZ-grown solar grade silicon10.1063/1.3021300 ↗
12. Electronic properties of highly-doped and compensated solar-grade silicon wafers and solar cells10.1063/1.3585800 ↗
13. Effect of dopant compensation on the performance of Czochralski silicon solar cells10.1016/j.solmat.2012.02.023 ↗
14. Impact of incomplete ionization of dopants on the electrical properties of compensated p-type silicon10.1063/1.3686151 ↗
15. A simulation model for the density of states and for incomplete ionization in crystalline silicon. II. Investigation of Si:As and Si:B and usage in device simulation10.1063/1.2386935 ↗
16. Donor-acceptor pair luminescence in compensated Si for solar cells10.1063/1.3622560 ↗
17. Electron and hole mobilities in silicon as a function of concentration and temperature10.1109/T-ED.1982.20698 ↗
18. Resistivity-dopant density relationship for boron-doped silicon10.1149/1.2129394 ↗
19. Resistivity-dopant density relationship for phosohorus-doped silicon10.1149/1.2130006 ↗
20. Carrier mobilites in silicon semi-empirically related to temperature, doping and injection level10.1016/0038-1101(81)90097-6 ↗
21. A unified mobility model for device calculation-I. Model equations for and concentration dependence10.1016/0038-1101(92)90325-7 ↗
22. A unified mobility model for device calculation-I. Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
23. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
24. Impurity-to-efficiency simulator: predictive calculation of silicon solar cell performance based on iron content and distribution10.1002/pip.1062 ↗
25. V. Vahanissi, A. Haarahiltunen, H. Talvitie, M. Yli-Koski, H. Savin, Impact of phosphorus gettering parameters and initial iron level on silicon solar cell properties, Progress in Photovoltaics: Research and Applications, in press, http://dx.doi.org/10. 1002/ pip. 2215.
26. Doping dependence of the carrier lifetime crossover point upon dissociation of iron–boron pairs in crystalline silicon10.1063/1.2358126 ↗
27. Validity of simplified Shockley-Read-Hall statistics for modeling carrier lifetimes in crystalline silicon10.1103/PhysRevB.67.075203 ↗
28. P.A. Basore, D.A. Clugston, PC1D V5.9, University of New South Wales, 2003.
29. Green · 1982
30. Ga co-doping in Cz-grown silicon ingots to overcome limitations of B and P compensated silicon feedstock for PV applications10.1002/pssc.201000330 ↗
31. Sheil · Zeitschrift für Metallkunde · 1942 · 34 · 70
32. Accurate determination of minority carrier- and lattice scattering-mobility in silicon from photoconductance decay10.1063/1.352225 ↗
33. Diffusion lengths in solar cells from short-circuit current measurement10.1063/1.89433 ↗