Silver grid electrodes for faster switching ITO free electrochromic devices
Source abstract
Abstract
Abstract Low-cost electrochromic devices presenting fast switching continue to have an enormous interest for industrial applications; however the durability of the devices is a parameter of critical importance. The present work describes the preparation and characterization of ITO free electrochromic devices, being the use of hybrid electrodes for low-cost electrochromic devices the main focus. It was used silver grids (silver ink) as electrically conductive electrodes. These grids were screen-printed on polyethylene terephthalate (PET), using two different patterns and different line widths. The printing of a conductive polymer film on top of the grids for electrochemical protection of the metal was evaluated. These grids were characterized in terms of equivalent resistance and light transmission, considering each pattern, as well as electrochemical stability. The resulting electrochromic devices were tested using cyclic voltammetry, spectroelectrochemistry and colorimetry. The durability of the devices was characterized through the analysis of color contrast over time during continuous operation conditions using a cycling program. These experiments displayed electrochromic devices performing 100 cycles before degradation with switching times of 4.5 s and a color contrast (ΔE) of 27 or a variation in transmittance of 50% between redox states.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. IZO deposition by RF and DC sputtering on paper and application on flexible electrochromic devices10.1016/j.displa.2013.06.004 ↗
2. Monk · 2007
3. Handbook of Inorganic Electrochromic
4. Inkjet printing of sol–gel synthesized hydrated tungsten oxide nanoparticles for flexible electrochromic devices10.1021/am201606m ↗
5. Navigating the color palette of solution processable electrochromic polymers10.1021/cm1021245 ↗
6. Color control in pi-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
7. Ginley · 2010
8. Conductivity trends of PEDOT-PSS impregnated fabric and the effect of conductivity on electrochromic textile10.1021/am100036n ↗
9. Fast switching ITO free electrochromic devices10.1002/adfm.201302320 ↗
10. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗
11. Stabilizing inorganic photoelectrodes for efficient solar-to-chemical energy conversion10.1039/c3ee40258d ↗
12. Fast-switching printed organic electrochemical transistors including electronic via through plastic and paper substrates10.1109/TED.2013.2258923 ↗
13. 〈http://www.printedelectronicsworld.com/articles/5733/ito-alternative-transparent-metal-grid-electrodes〉, November 2015.
14. Electrochromic properties of inkjet printed vanadium oxide gel on flexible polyethylene terephthalate/indium tin oxide electrodes10.1021/am301213b ↗