journal article·2011-12

Preparation of size-controlled fine Al particles for application to rear electrode of Si solar cells

Hye Moon Lee, Yong-Jin Kim

Publisher page

Abstract

Micron-sized aluminum (Al) particles are widely used in the fabrication of rear electrodes of Si solar cells. Moreover, the rear electrode of Si solar cells can be fabricated at relatively low electrode firing temperature using submicron Al particles whose sizes can be easily controlled, but there have not been any clear methods to obtain submicron Al particles yet. In this study, we first successfully prepared size-controlled Al submicron particles via a wet chemical process using dibutyl ether solvent and then to fabricate rear electrodes of Si solar cells; to our knowledge, this is the first such application of submicron Al particles. The geometric mean diameter ( D p) of the Al particles could be controlled from 139 to 614 nm by adjusting the reaction temperature, and the prepared Al particles showed geometric standard deviations ( σ g) of 1.25–1.30. The Al particle size was reduced to ∼35 nm by adding an organic surfactant to the precursor solution for Al particle preparation. Rear electrodes were fabricated by firing the screen printed Al paste films comprising Al particles with geometric mean diameters of ∼379 nm from 600 to 900° C. The electrode fired at 750 °C showed the minimum electrical sheet resistivity of 77.9 mΩ/□ (specific resistivity: 97.3 μΩ cm) and contained a BSF (back surface field) with a thickness of ∼3 μm. Our results indicate that the reported method can be used to minimize the thermal defects in the rear electrode of Si solar cells by lowering the electrode firing temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Plasma implantation for emitter and localized back surface field (BSF) formation in silicon solar cells
2. Structural properties of the solidified-Al/regrown-Si structures of printed Al contacts on crystalline Si solar cells10.1016/j.solmat.2008.02.031 ↗
3. S. Kim, S. Sridharan, C. Khadilkar, A. Shaikh, Aluminum pastes (lead-free/low-bow) for thin wafers, in: Proceedings of the IEEE 31st Photovoltaic Specialists Conference and Exhibition, January 3–7, Orlando, FL, USA, 2005, pp. 1100–1102.10.1109/PVSC.2005.1488327 ↗
4. Defect passivation of industrial multicrystalline solar cells based on PECVD silicon nitride10.1016/S0927-0248(01)00170-2 ↗
5. Bow in screen-printed back-contact industrial silicon solar cells10.1016/j.solmat.2007.04.010 ↗
6. Advances in a-Si:H/c-Si heterojunction solar cell fabrication and characterization10.1016/j.solmat.2008.10.020 ↗
7. Some structures for cascade solar cells10.1016/j.solmat.2003.06.010 ↗
8. Advanced buried contact solar cell structure10.1016/S0927-0248(97)00099-8 ↗
9. Fine size Pb-based glass frit with spherical shape as the inorganic binder of Al electrode for Si solar cells10.1016/j.jallcom.2009.10.053 ↗
10. Nanoparticle assembly on patterned plus/minus″ surfaces from electrospray of colloidal dispersion10.1016/j.jcis.2006.07.033 ↗
11. Direct ordering and shape effects of FePt nanoparticles produced by nanoparticle beam technology10.1063/1.2060958 ↗
12. Phase transformation, coalescence, and twinning of monodisperse FePt nanocrystals10.1021/nl0100421 ↗
13. Size dependence of the magnetic moments of exposed nanoscale iron particles10.1016/S0304-8853(00)01349-4 ↗
14. C.-H. Kim, M.-J. Kim, S.-R. Chae, E.-G. Heo, Paste containing aluminum for preparing PDP electrode, method of preparing the PDP electrode using the paste and PDP electrode prepared using the method, US Patent 1,640, January 7, 2010.
15. S. Krishnan, Design, Fabrication and Characterization of Thin-Film M–I–M Diodes for Rectenna Array. A Thesis Submitted in Partial Fulfillment of the Requirement for the Degree Master of Science, University of South Florida, May 26, 2004.
16. Preparation of aluminum-oleic acid nano-composite for application to electrode for Si solar cells10.2320/matertrans.M2010409 ↗
17. J.E. Williams, Production of aluminum powder, in: E. Klar (Ed.), Metals Handbook Ninth Edition, vol. 7, Powder metallurgy, Ohio, 1984, pp. 125–130.
18. Kinetic instability of nanocrystalline aluminum prepared by chemical synthesis; facile room-temperature grain growth10.1021/ja981972y ↗
19. Sonochemically assisted thermal decomposition of alane N,N-dimethylethylamine with titanium(IV) isopropoxide in the presence of oleic acid to yield air-stable and size selective aluminum core-shell nanoparticles10.1021/jp809295e ↗
20. Surface passivation of bare aluminum nanoparticles using perfluoroalkyl carboxylic acids10.1021/cm048264y ↗
21. Characterizing the coating and size-resolved oxidative stability of carbon-coated aluminum nanoparticles by single-particle mass-spectrometry10.1007/s11051-005-9012-2 ↗
22. Capping and passivation of aluminum nanoparticles using alkyl-substituted epoxides10.1021/la901822h ↗
23. Synthesis of monodisperse spherical nanocrystals10.1002/anie.200603148 ↗
24. On the mechanism of low temperature oxidation for aluminum particles down to the nano-scale10.1002/prep.200400045 ↗