Efficiency improvement of organic solar cells with imprint of nanostructures by capillary force lithography
Source abstract
Abstract
Abstract Organic solar cells imprinted with nanostructures, by the capillary force lithography process using soft molding, on either the active layer or the electron transport layer (ZnO) of an inverted organic solar cell are made. With proper control of the wetness of the ZnO or the active layer, either of them can be readily driven by the capillary force into the cavities formed by the nanostructures on the soft mold during the imprint. The nanostructures demonstrated here can be either regular gratings or arrays of nanorods. Due to light scattering and intrusion of the nanostructures into the active layer, both light absorption and carrier transport can be significantly improved, which can effectively increase both the fill factor and the power conversion efficiency (PCE). For solar cells having nanostructures imprinted on the electron transport layer of ZnO, the PCE can increase from 2.39 to 2.65% for gratings or 3% for arrays of nanorods, respectively, and the fill factor can increase from 0.5 to 0.57 for arrays of nanorods. For solar cells having nanostructures of gratings imprinted on the active layer, the fill factor increases from 0.5 to 0.6, the current density increases from 9.02 mA/cm2 to 9.73 mA/cm2, and the PCE increases from 2.4 to 3.05%. The use of capillary force to imprint nanostructures eliminates the use of costly imprint equipments and possible damage of the active layer by contacting with air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
3. Claire for the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
4. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium–tin-oxide10.1016/j.solmat.2009.04.020 ↗
5. Optimization of inverted tandem organic solar cells10.1016/j.solmat.2010.11.023 ↗
6. Self assembly of semiconductor organogelator nanowires for photoinduced charge separation10.1021/nn9001165 ↗
7. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
8. Photoconductivity of a low-bandgap conjugated polymer10.1002/adfm.200600199 ↗
9. Monodisperse oligo(phenylene vinylene) ligands on CdSe quantum dots: synthesis and polarization anisotropy measurements10.1021/ja077409+ ↗
10. Recent progress in polymer solar cells: manipulation of polymer fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
11. Trapping light with micro lenses in thin film organic photovoltaic cells10.1364/OE.16.021608 ↗
12. Functional microprism substrate for organic solar cells10.1016/j.tsf.2005.12.011 ↗
13. Electrophotonic enhancement of bulk heterojunction organic solar cells through photonic crystal photoactive layer10.1063/1.3075053 ↗
14. Surface relief gratings on poly(3-hexylthiophene) and fullerene blends for efficient organic solar cells10.1063/1.2802561 ↗
15. Efficiency improvement of blended poly (3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 solar cells by nanoimprinting10.1063/1.3117226 ↗