Round robin on accelerated life testing of solar absorber surface durability
Source abstract
Abstract
As degradation by ageing of solar absorber surfaces was identified to be an important quality factor, the Working Group MSTC (`Materials in Solar Thermal Collectors') of the IEA-SHCP (International Energy Agency-Solar Heating and Cooling Programme) worked out a general test procedure for accelerated lifetime testing (ALT) of these materials, based on methods established by the former Task X of the IEA SHCP. The qualification test procedure was adopted by ISO and is presently dealt within ISO/TC 180 `Solar Energy'. The standard proposal in detail describes a procedure how to test the long-term stability of an absorber surface for the use in flat plate collectors for domestic hot water systems. The collectors service lifetime is assumed to be 25 years, at least. Degradation caused by thermal loads, high humidity and condensation and sulphur dioxide are regarded. In order to examine the feasibility and reproducibility of the test method the Working Group MSTC initiated a round robin test in accelerated life testing of solar absorber surfaces. The test was performed according to the ISO standard proposal dated January 1997. In total, five different industrially manufactured absorber coatings were available to the three participating laboratories. Tests concerning the thermal stability as well as the resistance to high humidity and condensation were performed by all three laboratories. The test for determining absorber surface corrosion resistance to air of high humidity containing sulphur dioxide was carried out by one lab only. The outcome of the round robin test shows very good agreement of the results of the different coatings tested for all of the laboratories. The feasibility and reproducibility of the method was fully confirmed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. B. Carlsson, U. Frei, M. Köhl, K. Möller, Accelerated life testing of solar energy materials- case study of some selective solar absorber coating materials for DHW systems, A Report of IEA Task X, Solar Materials Research and Development, February 1994, SP Report 94:13, ISBN91-7848-472-3; (Report available from Swedish national Testing and Research Institute, P.O. Box 857, S-50115 Boras, Sweden).
2. Bo Carlson (Ed.), Proposal for qualification test procedure for solar absorber surface durability, Working Document of the Working Group `Materials in Solar Thermal Collectors’ of the IEA Solar Heating and Cooling Programme, January 1997, SP-.Technical Note 1997:08.
3. Qualification test procedure for solar surface durability10.1016/S0927-0248(99)00111-7 ↗