journal article·2026-08Open access

>24% screen printed Cu contacted n-TOPCon solar cells with successful implementation of LECO process

Young-Woo Ok, Ruohan Zhong, Vijaykumar Upadhyaya, Venkata Sai Aditya Mulkaluri, Ajeet Rohatgi, Dustin Williams, Kevin Elmer, Apolo Nambo, Ruvini Dharmadasa, Thad Druffel, Pauls Stradins, Harvey Guthrey

Abstract

In this paper, we report the successful fabrication of >24.0 % efficiency n-TOPCon Si solar cells with screen-printed, fire-through Cu contact to n-TOPCon on the rear side and Ag contacted boron emitter on the front side by implementing optimized firing and LECO conditions. The highest efficiency (24.3%) Cu contacted n-TOPCon cell in this study showed excellent cell performance parameters with V oc >730 mV, J sc of 41.1 mA/cm 2 and FF of 80.8%, resulting in an absolute efficiency gap of 0.2% between Cu-contacted and fully Ag contacted n-TOPCon cells (24.5%). The mini-module fabricated with the Cu contacted n-TOPCon cell showed excellent reliability and durability of open-circuit voltage (V oc ), pseudo fill factor (pFF) and efficiency after prolonged damp-heat tests. Such high efficiency screen printed Cu contacted n-TOPCon cells provide unique opportunity to replace very expensive Ag contact on n-TOPCon with cheaper screen printable Cu metal pastes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Copper-based nanomaterials and applications · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. International technology roadmap for photovoltaic (ITRPV)
2. Silicon‐based passivating contacts: the TOPCon route10.1002/pip.3522 ↗
3. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
4. Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact10.1016/j.solmat.2020.110585 ↗
5. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
6. ∼ 23% rear side poly-Si/SiO2 passivated silicon solar cell with optimized ion-implanted boron emitter and screen-printed contacts10.1016/j.solmat.2021.111183 ↗
7. Balancing passivation and contact properties of ultra-high sheet resistance tunnel oxide passivating contact solar cells enabled by refined laser-enhanced contact optimization
8. Laser‐enhanced contact optimization on iTOPCon solar cells10.1002/pip.3598 ↗
9. Investigation of the Ag–Si contact characteristics of boron emitters for n‐tunnel oxide‐passivated contact solar cells metallized by laser‐assisted current injection treatment10.1002/solr.202400268 ↗
10. Investigation on effects of the laser‐enhanced contact optimization process with Ag paste in a boron emitter for n‐TOPCon solar cell10.1002/pip.3854 ↗
11. Nano‐size joule‐heating to achieve low‐Ohmic Ag–Si contact on boron emitters of n‐TOPCon solar cells
12. Mechanisms and strategies for laser-enhanced contact optimization in tunnel oxide passivating contact solar cells with ultra-high sheet resistance emitters
13. Low cost metallisation based on Ni/Cu plating enabling high efficiency industrial solar cells
14. Physics of copper in silicon10.1149/1.1421348 ↗
15. Quick determination of copper-metallization long-term impact on silicon solar cells10.1149/1.3466984 ↗
16. Investigation of Cu metallization for Si solar cells10.1016/S0927-0248(02)00052-1 ↗
17. Investigation of contact formation mechanism and application of copper-based front contact paste for crystalline silicon solar cells10.1016/j.solmat.2023.112213 ↗
18. Development of nanoparticle copper screen printing pastes for silicon heterojunction solar cells10.1016/j.solener.2019.07.055 ↗
19. Interdigitated back contact technology as final evolution for industrial crystalline single-junction silicon solar cell
20. Industrial-scale deposition of nanocrystalline silicon oxide for 26.4%-efficient silicon heterojunction solar cells with copper electrodes10.1038/s41560-023-01388-4 ↗
21. Copper based front side metalization contacts screen printed and fired in air demonstrating durability
22. High efficiency screen-printed Ag-Free PERC solar cell with Cu paste and laser-enhanced contact optimization10.1109/JPHOTOV.2025.3597679 ↗
23. Breaking the barrier: unveiling the potential of copper for solar cell metallization
24. Long term stability analysis of copper front side metallization for silicon solar cells10.1016/j.egypro.2014.08.012 ↗