journal article·2026-06Open access

Metallurgical solid waste-derived skeleton enables shape-stabilized phase change materials with robust properties for high-temperature (≥600 °C) thermal energy storage

Feng Jiang, Hao Wang, Dejian Pei, Tongtong Zhang, Jian Song, Yi Jin, Xiang Ling

Abstract

Solid waste-based heat storage materials are attractive due to their low carbon emission and cost effectiveness, demonstrating significant potential for application in concentrated solar plants and waste heat recovery. In this study, steel slag, red mud and iron tailings were used as three types of metallurgical solid wastes to develop form-stable composite phase change materials (C-PCMs) for high temperature (≥600 °C) thermal energy storage in combination with NaCl-Na 2 SO 4 eutectic salt. The thermophysical and mechanical properties of the C-PCMs were comprehensively investigated. Results showed that both red mud and iron tailings had better salt loading capacity than steel slag, which could effectively encapsulate 50 wt% salt without leakage. And these two C-PCMs also exhibited excellent compressive strength of 90 MPa and 81 MPa, respectively. In particular, red mud based C-PCMs showed a phase transition temperature of 625 °C and latent heat of 70 J/g, which only decreased by 2.8% after 200 thermal cycles, indicating good thermal cycling stability. By contrast, iron tailings based C-PCMs initially had lower latent heat of 48 J/g at 622 °C due to the reaction between SiO 2 and Na 2 SO 4 , but its latent heat increased significantly by 66.6% to 80 J/g after 200 cycles through self-reorganization of the phase during thermal cycling. The results of this work might lay a solid foundation for further exploration of metallurgical solid waste in high temperature thermal energy storage, thereby significantly contributing to carbon emission reductions in both the resource and energy sectors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Progress of solid waste red mud in the field of ecology and environment10.1007/s11270-025-07815-4 ↗
2. Comparison of the effects of Ti-and Si-containing minerals on goethite transformation in the bayer digestion of goethitic bauxite10.1007/s12613-023-2628-3 ↗
3. Utilization of red mud and coal gangue for underground backfill material: hydration and environmental characteristics10.1007/s12613-025-3144-4 ↗
4. Comprehensive utilization status of red mud in China: a critical review10.1016/j.jclepro.2020.125136 ↗
5. Recycling of ironmaking and steelmaking slags in Japan and China10.1007/s12613-021-2400-5 ↗
6. Recent advances in soil remediation technology for heavy metal contaminated sites: a critical review10.1016/j.scitotenv.2022.156417 ↗
7. Properties and applications of shape-stabilized phase change energy storage materials based on porous material support—A review
8. A review on thermal energy storage with eutectic phase change materials: fundamentals and applications10.1016/j.est.2023.107713 ↗
9. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
10. Preparation and application of high-temperature composite phase change materials10.1016/j.est.2023.107669 ↗
11. Improved thermophysical properties of shape-stabilized NaNO3 using a modified diatomite-based porous ceramic for solar thermal energy storage10.1016/j.renene.2021.07.023 ↗
12. A review on carbon-based phase change materials for thermal energy storage10.1016/j.est.2022.104166 ↗
13. Review on clay mineral-based form-stable phase change materials: preparation, characterization and applications10.1016/j.rser.2016.10.014 ↗
14. Review on ceramic-based composite phase change materials: preparation, characterization and application10.1016/j.compositesb.2023.110584 ↗
15. Skeleton materials for shape-stabilization of high temperature salts based phase change materials: a critical review10.1016/j.rser.2019.109539 ↗
16. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review10.1016/j.rser.2017.05.271 ↗
17. Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications10.1016/j.jhazmat.2021.125407 ↗
18. Carbide slag based shape-stable phase change materials for waste recycling and thermal energy storage10.1016/j.est.2022.104256 ↗
19. High-temperature (800° C) performance of spodumene slag-based ternary sulphate composite phase change materials with improved mechanical property10.1016/j.cej.2024.157936 ↗
20. Synthesis and characterization of form-stable carbonate/steel slag composite materials for thermal energy storage
21. A new low-cost high-temperature shape-stable phase change material based on coal fly ash and K2CO310.1016/j.solmat.2019.110328 ↗
22. Novel low-cost anorthite porous ceramic-based binary chlorate high-temperature thermal energy storage material: preparation and characterization10.1021/acs.energyfuels.1c01196 ↗
23. A shape-stable phase change material for high-temperature thermal energy storage based on coal fly ash and Na2SO4-K2SO410.1016/j.solener.2024.112868 ↗
24. Gold tailings-solar salt shape-stabilized phase change materials for medium-high temperature thermal energy storage10.1016/j.est.2023.109810 ↗
25. Modification of steel slag to prepare chlorides based composite phase change materials with shape stability for high-temperature thermal energy storage10.1016/j.cej.2024.152062 ↗
26. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials10.1016/j.energy.2018.09.128 ↗
27. Selective laser melting manufacturing and heat transfer performance study of porous wick in loop heat pipe10.1016/j.jmapro.2024.07.017 ↗
28. Carbide slag recycling to fabricate shape-stable phase change composites for thermal energy storage10.1016/j.est.2023.106694 ↗
29. Steel slag-KNO3 phase change composites for thermal storage at medium-high temperature and solid waste recycling10.1016/j.matchemphys.2023.127655 ↗
30. Gold tailings-solar salt shape-stabilized phase change materials for medium-high temperature thermal energy storage10.1016/j.est.2023.109810 ↗
31. Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.02.064 ↗
32. Study of cycle-to-cycle dynamic characteristics of adiabatic compressed air energy storage using packed bed thermal energy storage10.1016/j.energy.2017.11.016 ↗
33. Improved thermophysical properties of shape-stabilized NaNO3 using a modified diatomite-based porous ceramic for solar thermal energy storage10.1016/j.renene.2021.07.023 ↗
34. Advancements in phase change materials for energy-efficient building construction: a comprehensive review10.1016/j.est.2024.110494 ↗
35. A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges10.1016/j.apenergy.2018.03.005 ↗
36. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
37. Wettability of molten Na2CO3–K2CO3 on coal fly ash ceramic substrates with expanded graphite10.1016/j.matchemphys.2020.123861 ↗
38. Ceramic–molten salt composites (CPCMs) for high-temperature thermal energy storage: improving sinterability and thermal stability by using solid wastes as skeletons10.1016/j.solmat.2022.111651 ↗
39. High-temperature (800° C) performance of spodumene slag-based ternary sulphate composite phase change materials with improved mechanical property10.1016/j.cej.2024.157936 ↗
40. Challenges and opportunities of utilizing municipal solid waste as alternative building materials for sustainable development goals: a review
41. Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: a review10.1016/j.jclepro.2019.06.061 ↗