One-step Cu-Fe bimetal-assisted chemical etching for texturing silicon surfaces with ball-crown-shaped upright pyramids
Source abstract
Abstract
Achieving the synergy between efficient light trapping and excellent interface passivation are desired in terms of surface texturing of high-efficiency silicon solar cell technology. To address these issues, this study proposed a Cu-Fe bimetal-assisted chemical etching (Cu-Fe MACE) method to texture the surface of silicon wafers. The effects of Fe(NO 3 ) 3 concentration on Cu deposition behavior, as well as the influence of Cu deposition on the subsequent etching process, were systematically investigated. The results indicated that the Fe(NO 3 ) 3 concentration had a pronounced influence on the deposition morphology of nano-sized Cu and the corresponding etching behavior. By controlling the Fe(NO 3 ) 3 concentration in the range of 0.1-0.15 M, a uniform texture of ball-crown-shaped upright pyramids was obtained on n-type monocrystalline silicon, showing good uniformity and light-trapping capability, with the average reflectance in the 300-1100 nm wavelength range reduced from about 25% for the as-cut wafer to 13% under the optimized conditions. By combining PL and minority carrier lifetime measurements, the passivation behavior of the etched surfaces was investigated. The rounded tips and smoother surface of the ball-crown-shaped upright pyramids significantly improved the coverage continuity and film quality of the Al 2 O 3 passivation layer. Compared with conventional upright pyramids, the new textured structure exhibited a higher minority carrier lifetime (τeff ≈ 3.0 × 10 −4 s at an injection level of 10 15 cm −3 ) and an implied open-circuit voltage of about 715 mV. This work provided valuable guidance for the design and application of surface texturing strategies that enabled both excellent light trapping and strong passivation in crystalline silicon solar cells.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Energy reserve dynamics: integrating renewable energy for energy security and sustainability in lesser-developed economies10.1016/j.eneco.2025.108882 ↗
2. Tailored key parameters of perovskite for high-performance photovoltaics10.1021/accountsmr.1c00056 ↗
3. Experimental and numerical modelling of hybrid photovoltaic-thermal solar collector integrated with thermal energy storage: influence of airflow and pipe configuration on system performance10.1016/j.enconman.2025.120651 ↗
4. Toward efficiency limits of crystalline silicon solar cells: recent progress in high‐efficiency silicon heterojunction solar cells
5. Enhancing surface properties of monocrystalline silicon wafers via thermal annealing for solar cell texturing
6. A grain orientation-independent single-step saw damage gettering/wet texturing process for efficient silicon solar cells10.1002/smll.202206831 ↗
7. Recombination at textured silicon surfaces passivated with silicon dioxide10.1063/1.3153979 ↗
8. Reactive ion etching (RIE) technique for application in crystalline silicon solar cells10.1016/j.solener.2010.01.031 ↗
9. Photonic light trapping and electrical transport in thin-film silicon solar cells10.1016/j.solmat.2014.10.012 ↗
10. Effect of texturing and surface preparation on lifetime and cell performance in heterojunction silicon solar cells10.1016/j.solmat.2008.05.011 ↗
11. Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance10.1016/j.solmat.2020.110761 ↗
12. Fabrication of nano-porous silicon using alkali etching process10.1016/j.matlet.2012.12.107 ↗
13. Modifications of textured silicon surface morphology and its effect on poly-Si/SiOX contact passivation for silicon solar cells10.1109/JPHOTOV.2019.2937230 ↗
14. Role of additive-assisted texturing on surface morphology and interface defect density in silicon heterojunction solar cells10.1007/s00339-025-08589-6 ↗
15. Effect of chemical polish etching and post annealing on the performance of silicon heterojunction solar cells
16. Novel Nano‐Pyramid/Polish hybrid morphology designed for high‐efficiency passivated contact solar cells10.1002/pip.70002 ↗
17. Study on the influence of micro-alkali texturing and micro-alkali polishing process on the passivation and contact performance of n-TOPCon solar cells10.1016/j.solmat.2023.112476 ↗
18. Upright pyramids vs. inverted pyramids surface textures: a comparative investigation on the electrical properties of PERC solar cells10.1007/s10854-022-09567-x ↗
19. Influence of the textured pyramid size on the performance of silicon heterojunction solar cell10.1016/j.solener.2021.04.021 ↗
20. Selective rounding for pyramid peaks and valleys improves the performance of SHJ solar cells10.1002/ese3.900 ↗
21. Improving performance of organic-silicon heterojunction solar cells based on textured surface via acid processing10.1021/acsami.6b03164 ↗
22. Surface texturing for advanced light management in crystalline silicon solar cells: from submicron pyramid fabrication to outdoor validation10.1016/j.renene.2025.124546 ↗
23. A low cost additive-free acid texturing process for large area commercial diamond-wire-sawn multicrystalline silicon solar cells10.1016/j.solener.2020.05.018 ↗
24. On the mechanism of the vapor etching of diamond wire sawn multi-crystalline silicon wafers for texturing10.1016/j.mssp.2016.05.017 ↗
25. Morphologies and optical properties of black silicon by room temperature reactive ion etching10.1016/j.materresbull.2020.110973 ↗
26. Silicon etching using Copper–Metal-assisted chemical etching: unveiling the role of Cu2O in microscale structure fabrication10.1021/acsami.4c17500 ↗
27. Black GaAs by metal-assisted chemical etching10.1021/acsami.8b10370 ↗
28. Improving the light trapping ability and flexural strength of ultrathin monocrystalline silicon wafers with submicron pyramid textures10.1016/j.solmat.2024.112847 ↗
29. Minimizing isolate catalyst motion in metal-assisted chemical etching for deep trenching of silicon nanohole array10.1021/acsami.7b04565 ↗
30. Toward scalable manufacturing of doped silicon nanopillars for thermoelectrics via metal-assisted chemical etching
31. Microdynamic behaviors of Au/Ni-assisted chemical etching in fabricating silicon nanostructures10.1016/j.apsusc.2025.162915 ↗
32. Tunable surface structuration of silicon by metal assisted chemical etching with Pt nanoparticles under electrochemical bias10.1021/acsami.6b09036 ↗
33. High-efficient solar cells textured by Cu/Ag-Cocatalyzed chemical etching on diamond wire sawing multicrystalline silicon10.1021/acsami.9b00724 ↗
34. Hydrophobic nanostructures fabricated by ferric nitrate etching method on single crystalline silicon surface10.1016/j.colsurfa.2019.123999 ↗
35. Texturing a pyramid-like structure on a silicon surface via the synergetic effect of copper and Fe(III) in hydrofluoric acid solution10.1016/j.apsusc.2016.03.021 ↗
36. Fabrication of inverted pyramid structure for high-efficiency silicon solar cells using metal assisted chemical etching method with CuSO4 etchant10.1016/j.solmat.2021.111200 ↗
37. Rapid and low temperature micro inverted pyramid texturing of silicon via copper catalyzed chemical etching for high efficiency PEDOT:PSS/silicon hybrid solar cells
38. Excellent omnidirectional light trapping properties of inverted micro-pyramid structured silicon by copper catalyzed chemical etching10.1016/j.optmat.2022.112677 ↗
39. Silicon surface texturing via TBAB-SDS composite additives enhanced copper-assisted chemical etching10.1016/j.solmat.2024.113185 ↗
40. Silicon nanowires synthesis by metal-assisted chemical etching: a review10.3390/nano11020383 ↗
41. Motility of metal nanoparticles in silicon and induced anisotropic silicon etching10.1002/adfm.200800371 ↗
42. Optimized antireflection coatings for high-efficiency silicon solar cells10.1109/16.119035 ↗
43. Nanoengineering silicon materials by metal-assisted chemical etching for thermal energy harvesting10.1016/j.mssp.2025.109622 ↗
44. Structuring of Si into Multiple Scales by Metal-Assisted Chemical Etching10.1002/adma.202005932 ↗
45. Arrays of nano and micro inverted silicon structures via copper catalyzed chemical etching for effective light trapping10.1016/j.mssp.2023.107791 ↗
46. Difference in anisotropic etching characteristics of alkaline and copper based acid solutions for single-crystalline Si10.1038/s41598-018-21877-x ↗
47. Tent-shaped surface morphologies of silicon: texturization by metal induced etching10.1007/s12633-018-9820-5 ↗
48. Effect of textured silicon pyramids size and chemical polishing on the performance of carrier-selective contact heterojunction solar cells10.1016/j.solener.2019.03.059 ↗