Experimental and machine learning investigation of a solar air heater with a novel compact thermal absorber design
Source abstract
Abstract
This study presents the development and evaluation of a novel and sustainable solar air heater (SAH) incorporating an enhanced compact heat-absorbing structure made from recycled aluminum radiator fins, designed to improve thermal and exergetic-performance while promoting material-reuse and sustainability. The reuse of waste radiator materials provides a multilayered-fin configuration that increases the effective heat-transfer surface area, enhances turbulence, and reduces overall heat loss without additional manufacturing cost. A comparative methodology was employed to assess the influence of this compact thermal-storage element on SAH performance under typical Autumn and Spring conditions. The baseline and modified SAH models were evaluated using dimensionless performance parameters and validated through experimental testing. The average thermal-efficiency of the baseline system was 64.81 %, while the compact heat-exchanger-integrated system reached 78.54 %, indicating a significant improvement of about 13.7 percentage points (21 % relative increase). Furthermore, the oriented-configuration (ochxSAH) provided an additional 3.23 percentage points improvement, corresponding to a further 4 % performance gain. The heat loss rate for chxSAH increase 5.9 % that accompanied a much larger rise in useful heat-gain, confirming improved energy utilization efficiency. These gains were achieved through the improved energy-saving capacity of the recycled radiator-based absorber and its ability to maintain higher outlet temperatures. To complement the experimental study, a machine-learning (ML) approach was applied to predict SAH efficiency. The ML results validated the superior thermal and exergy performance of the sustainable SAH design, demonstrating that integrating waste-material-based compact heat exchangers can enhance system efficiency while supporting circular-economy principles in solar-thermal technologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer Mechanisms · Adsorption and Cooling Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Techno-economic analysis of a roof-integrated solar air heating system for drying fruit and vegetables10.1016/j.enconman.2010.03.017 ↗
2. Design and performance evaluation of a new hybrid solar dryer for banana10.1016/j.enconman.2009.11.016 ↗
3. Solar thermal drying plant for agricultural products. Part 1: direct air heating system10.1016/j.renene.2019.10.069 ↗
4. Study of a solar air heater with a heat exchanger - accumulator10.1088/1755-1315/723/5/052013 ↗
5. Performance evaluation of updraft air tower power plant integrated with double skin solar air heater
6. Performance characteristics of the Spiky Central Receiver Air Pre-heater (SCRAP)10.1016/j.solener.2020.03.027 ↗
7. Initial analysis on the novel Spiky Central Receiver Air Pre-heater (SCRAP) pressurized air receiver10.1016/j.egypro.2015.03.053 ↗
8. Innovative thermo-solar air heater10.1016/j.enbuild.2017.10.082 ↗
9. Energy and exergy analyses of porous baffles inserted solar air heaters for building applications10.1016/j.enbuild.2012.10.055 ↗
10. Passive air cooling system and solar water heater with phase change material for low energy buildings in hot arid climate10.1016/j.enbuild.2021.110854 ↗
11. Energy and exergy analysis of solar air heater having new design absorber plate with conical surface10.1016/j.applthermaleng.2017.11.129 ↗
12. Numerical studies on the effect of delta-shaped obstacles' spacing on the heat transfer and pressure drop in v-corrugated channel of solar air heater10.1016/j.solener.2016.02.031 ↗
13. Design and performance of a solar air heater with long term heat storage10.1016/j.ijheatmasstransfer.2012.12.044 ↗
14. Design and thermal performance evaluation of an air heater with low cost thermal energy storage10.1016/j.applthermaleng.2019.114768 ↗
15. Eco-friendly and economical solar heater design using internal structure and phase change materials10.3390/en14217423 ↗
16. Comparative performance of coriander dryer coupled to solar air heater and solar air-heater-cum-rocked storage10.1016/1359-4311(95)00038-0 ↗
17. Performance of a natural circulation solar air heating system with phase change material energy storage10.1016/S0960-1481(01)00173-2 ↗
18. Output air temperature prediction in a solar air heater integrated with phase change material
19. Experimental investigation of PCM capsules integrated in solar air heater
20. Numerical and experimental investigation of the charging and discharging processes in a packed bed PCM based storage unit for air heating applications
21. Effect of porous media on the performance of the double-pass flat plate solar air heater10.1016/j.icheatmasstransfer.2004.11.001 ↗
22. Experimental analysis of single and double pass smooth plate solar air collector with and without porous media
23. Energy, exergy, and economic analysis of tubular solar air heater with porous material: an experimental study10.1016/j.applthermaleng.2021.117294 ↗
24. Effect of collector aspect ratio on the collector efficiency of upward type baffled solar air heaters10.1016/S0196-8904(99)00148-X ↗
25. Theoretical analysis for an air heater with a box-type absorber10.1016/S0038-092X(98)00044-9 ↗
26. Energy analysis of a solar air collector with rows of fins10.1016/S0960-1481(03)00383-5 ↗
27. Experimental analysis and numerical modeling of solar air heater with helical flow path10.1016/j.solener.2018.01.030 ↗
28. Experimental analysis of double flow solar air heater with multiple C shape roughness10.1016/j.solener.2017.07.038 ↗
29. Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs10.1016/j.solener.2016.02.040 ↗
30. Experimental and numerical investigation of solar air heater with novel V-rib geometry10.1016/j.est.2019.01.016 ↗
31. Experimental investigation on heat-transfer enhancement due to a gap in an inclined continuous rib arrangement in a rectangular duct of solar air heater10.1016/j.renene.2007.03.023 ↗
32. Experimental study of new solar air heater design10.1080/15435075.2014.968922 ↗
33. Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater10.1016/j.jare.2013.03.001 ↗
34. Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans10.1016/j.renene.2009.03.029 ↗
35. Experimental study on the performance of spiral solar air heater10.1016/j.solener.2019.02.033 ↗
36. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates10.1016/j.apenergy.2010.05.017 ↗
37. Design a low-cost, medium-scale, flat plate solar air heater: an experimental and simulation study10.1016/j.est.2022.105858 ↗
38. Thermal performance of an economical air heater for space heating using composite energy storage materials
39. Predicting thermal performance in solar air heaters with V-corrugated, shot-blasted absorber plate, and black pebble-based sensible heat storage: a machine learning approach10.1016/j.est.2024.113450 ↗
40. Enhancing thermal and exergetic performance of solar air heating systems with PCM-integrated finned obstacles10.1016/j.energy.2025.136149 ↗
41. CFD modeling of a tubular three-pass solar air heater with phase change material: investigating heat transfer enhancement and energy efficiency10.1016/j.est.2024.111522 ↗
42. Synergistic optimization of mirror-augmented cylindrical obstacles in solar air heaters: a coupled thermal-safety analysis10.1016/j.psep.2025.108142 ↗
43. Multiphysics CFD modeling to assess performance of a perforated multi-plate indirect solar dryer with a V-corrugated absorber surface10.1016/j.applthermaleng.2023.120387 ↗
44. CFD modeling and performance evaluation of an open-aperture partially evacuated receiver with internal twisted inserts in solar PTCs: energy and exergy analysis10.1007/s11356-022-25063-5 ↗
45. Comprehensive energy, exergy, enviro-exergy, and thermo-hydraulic performance assessment of a flat plate solar air heater with different obstacles10.1016/j.applthermaleng.2021.117907 ↗
46. An open-aperture partially-evacuated receiver for more uniform reflected solar flux in circular-trough reflectors: comparative performance in air heating applications10.1016/j.renene.2021.05.072 ↗
47. Performance evaluation of various nano heat transfer fluids in charging/discharging processes of an indirect solar air heating system10.1016/j.energy.2023.127281 ↗
48. Accurate prediction of exergetic efficiency of solar air heaters using various predicting methods10.1016/j.jclepro.2020.125115 ↗
49. Numerical simulation and CFD-based correlations for artificially roughened solar air heater
50. Machine learning for heat transfer correlations10.1016/j.icheatmasstransfer.2020.104694 ↗
51. Numerical heat transfer analysis & predicting thermal performance of fins for a novel heat exchanger using machine learning10.1016/j.csite.2020.100706 ↗
52. Universal condensation heat transfer and pressure drop model and the role of machine learning techniques to improve predictive capabilities10.1016/j.ijheatmasstransfer.2021.121712 ↗
53. Influence of rectangular ribs on exergetic performance in a triangular duct solar air heater10.1115/1.4046057 ↗
54. Aluminium in construction: recycling and life cycle impacts
55. Efficiency and exergy analysis of a new solar air heater10.1016/j.renene.2004.01.006 ↗
56. Energy, exergy, and enviroeconomic assessment of double and single pass solar air heaters having a new design absorber10.1016/j.psep.2020.11.020 ↗
57. Analytical investigation of solar air heater with jet impingement using energy and exergy analysis10.1016/j.solener.2017.12.036 ↗
58. Energy and exergy analysis of a vertical solar air heater with nano-enhanced absorber coating and perforated baffles10.1016/j.renene.2022.01.074 ↗
59. Energy and exergy investigation of a solar air heater for different absorber plate configurations
60. Thermohydraulic correlations and exergy analysis of a solar air heater duct with inclined baffles10.1016/j.csite.2020.100672 ↗
61. Thermal and exergy analysis of solar air heater enhanced with sodium carbonate decahydrate and magnesium sulfate heptahydrate PCM: performance evaluation10.1016/j.applthermaleng.2024.124556 ↗
62. Energy, exergy, economic and environmental analysis of a solar air heater integrated with double triangular fins: experimental investigation10.1016/j.ijft.2024.100979 ↗
63. Energy and exergy experimental analysis for innovative finned plate solar air heater10.1016/j.csite.2024.104570 ↗
64. Performance prediction of tubular solar air heater with finned semi-cylindrical absorber and swirl flow using Kolmogorov-Arnold networks and Walrus Optimizer10.1016/j.solmat.2025.113726 ↗
65. Thermo-hydrodynamic analysis of various curved solar air-heaters with boot-shaped ribs: CFD simulations coupled with an optimized Artificial Neural Network model10.1016/j.applthermaleng.2025.125750 ↗
66. Thermal performance enhancement of solar air heater using louvered fins collector10.1016/j.solener.2022.04.046 ↗
67. Atmospheric water extraction based on solar air heater encapsulated with phase change material: an experimental investigation10.1016/j.solmat.2024.112764 ↗
68. Energy and exergetic analysis of a solar air heater for enhanced thermohydraulic performance with side wall treatment10.1016/j.energy.2024.134333 ↗
69. Exergetic, economic and environmental analysis of temperature controlled solar air heater system
70. Thermal performance prediction of a solar air heater with a C-shape finned absorber plate using RF, LR and KNN models of machine learning
71. Duffie · 2013
72. Solar‐energy thermal processes10.1063/1.3023429 ↗
73. Boes · 1976
74. Cengel · 2015
75. Cengel · 2014
76. Solar radiation10.1002/9781118671603.ch1 ↗
77. Kalogirou · 2014
78. Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters10.1016/j.apenergy.2006.02.005 ↗
79. 3D study on the performance of cooling technique composed of heat spreader and microchannels for cooling the solar cells10.1016/j.enconman.2018.05.075 ↗
80. An investigation into sky temperature estimation, its variation, and significance in heat transfer calculations of solar cookers10.1002/htj.21459 ↗
81. Integrative passive and active cooling system using PCM and nanofluid for thermal regulation of concentrated photovoltaic solar cells10.1016/j.enconman.2019.112065 ↗
82. Natural-convection heat transfer from a plate with arbitrary inclination10.1016/0017-9310(72)90118-4 ↗
83. Holman · 2012
84. Effects of trapezoidal and twisted trapezoidal tapes on turbulent heat transfer in tubes10.1016/j.applthermaleng.2022.118386 ↗
85. Describing uncertainties in single-sample experiments
86. Hecht · 1998
87. Incropera · 2015
88. Howell
89. ASTM E903 - 20 standard test method for solar absorptance , reflectance , and transmittance of materials using integrating spheres
90. Solar air heater with rotating circular ribs: Hybrid CFD-ANN approach for prediction of thermo-hydraulic performance
91. Application of rough surfaces to heat exchanger design10.1016/0017-9310(72)90095-6 ↗
92. Thermo-hydraulic performance enhancement of a solar air heater using rotating cylindrical turbulators10.1016/j.applthermaleng.2023.121748 ↗
93. 2013
94. Exchange · 2025