journal article·2026-05Open access

A bibliometric analysis and recent trends of heat transfer enhancement techniques in parabolic trough collectors

M. Reda Haddouche, Houssem Hachemi, Abdelhadi Haddouche, Müslüm Arıcı

Abstract

Parabolic Trough Collector (PTC) is one of the most widely used solar thermal technologies for harnessing solar energy efficiently. Heat transfer enhancement within PTCs is crucial to increase their overall thermal performance and energy conversion efficiency. This study presents a comprehensive bibliometric analysis of research on PTC enhancements, highlighting key trends, influential studies, and global contributions in this domain. The analysis identifies significant research clusters, collaborations, and the evolution of heat transfer improvement techniques over the years. Furthermore, this paper presents various passive and active techniques employed to enhance heat transfer in PTCs. Advanced active enhancement techniques for PTCs include integrating PV panels or thermoelectric generators for combined heat and power production, as well as using electromagnetic fields or ultrasonic waves to improve fluid flow and heat transfer. Additionally, forced circulation through pumps or mechanical stirring enhances thermal uniformity. Passive techniques, including inserts (wire coils, twisted tapes, and helical fins) and surface modifications (dimples, corrugations, and metal foams), are widely investigated for increasing turbulence and augmenting heat transfer rates. Additionally, different absorber tube geometries, such as U-shaped tubes, S-curved tubes, and cavity-based designs, have been explored to reduce thermal losses and enhance heat retention. Moreover, researchers have focused on hybrid techniques that combine multiple enhancement methods for superior performance. These include the integration of nanofluids with modified absorber tube geometries or the use of inserts alongside enhanced HTFs. Such combined approaches leverage the benefits of each individual technique to achieve greater efficiency improvements. Although several review papers exist on heat-transfer enhancement in PTCs, none of them provide a quantitative, data-driven overview of how research in this field has evolved. The rapid growth of publications on PTC enhancement techniques makes a structured bibliometric assessment necessary to identify trends, influential works, and global research dynamics. However, existing reviews do not provide a dedicated bibliometric assessment of heat-transfer enhancement methods in PTCs, leaving gaps in identifying research trends and underexplored techniques. The findings of this study provide a structured overview of past and current advancements in PTC heat transfer enhancement, offering valuable insights for future research directions. By analysing bibliometric data and reviewing enhancement techniques, this paper serves as a guideline for optimizing PTC designs to achieve higher thermal efficiency and energy output in solar thermal applications. However, existing reviews do not provide a dedicated bibliometric assessment of heat-transfer enhancement methods in PTCs, leaving gaps in identifying research trends and underexplored techniques. • A bibliometric analysis is conducted to map research trends in heat transfer enhancement for PTCs. • The paper provides a detailed evaluation of fins, inserts, nanofluids, and absorber tube geometry modifications for enhancing heat transfer in PTC • Combined methods show promising results in maximizing efficiency while managing pressure loss.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Performance analysis of solar water heater in multipurpose solar heating system
2. Recent advancement of nanofluids in solar concentrating collectors: a brief review10.1016/j.matpr.2022.08.078 ↗
3. A thermal efficiency-enhancing strategy of parabolic trough collector systems by cascadingly applying multiple solar selective-absorbing coatings10.1016/j.apenergy.2021.118508 ↗
4. Kalogirou · 2009
5. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
6. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
7. Experimental and numerical studies of thermal performance enhancement in the receiver part of solar parabolic trough collectors10.1016/j.rser.2017.01.171 ↗
8. A review of different working fluids used in the receiver tube of parabolic trough solar collector10.1007/s10973-023-11991-y ↗
9. Heat transfer enhancement techniques using different inserts in absorber tube of parabolic trough solar collector: a review10.14744/thermal.0000847 ↗
10. Heat transfer enhancement in parabolic trough collectors: a comprehensive review10.1016/j.rser.2018.04.093 ↗
11. Principal difficulties with parabolic trough collector systems and performance-boosting strategies: a comprehensive review10.1016/j.ijft.2024.101009 ↗
12. Direct gas heating in linear concentrating solar collectors for power and industrial process heat production: applications and challenges
13. Heat loss analysis review: parabolic trough and linear Fresnel collectors10.1016/j.rser.2024.114497 ↗
14. A review on the application of hybrid nanofluids for parabolic trough collector: recent progress and outlook10.1016/j.jclepro.2021.126031 ↗
15. Heat transfer enhancement in parabolic trough receivers using inserts: a review
16. Enhancing the optical and thermal efficiency of a parabolic trough collector – a review10.1016/j.apenergy.2018.11.048 ↗
17. Enhanced heat transfer in a parabolic trough solar receiver by inserting rods and using molten salt as heat transfer fluid10.1016/j.apenergy.2018.03.091 ↗
18. Heat transfer enhancement of a molten salt parabolic trough solar receiver with concentric and eccentric pipe inserts10.1016/j.egypro.2017.12.103 ↗
19. Heat transfer enhancement analysis of tube receiver for parabolic trough solar collector with pin fin arrays inserting10.1016/j.solener.2017.01.020 ↗
20. Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts10.1016/j.apenergy.2014.03.037 ↗
21. Numerical thermal study on effect of porous rings on performance of solar parabolic trough collector10.1016/j.applthermaleng.2017.03.021 ↗
22. Numerical investigation of an enhanced PTC absorber tube using cylindrical inserts10.1002/htj.22861 ↗
23. Mohammed Reda · 2023
24. Effects of fins base rounding on heat transfer characteristics of absorber tube of parabolic trough collector10.1007/s13369-022-06948-6 ↗
25. Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube10.1016/j.energy.2016.08.013 ↗
26. Numerical investigations on fully-developed mixed turbulent convection in dimpled parabolic trough receiver tubes10.1016/j.applthermaleng.2016.10.012 ↗
27. Heat transfer enhancement in three-start spirally corrugated tube: experimental and numerical study10.1016/j.ces.2015.06.009 ↗
28. Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles10.1016/j.renene.2019.06.027 ↗
29. The numerical investigation of spherical grooves on thermal–hydraulic behavior and exergy efficiency of two-phase hybrid MWCNT-Al2O3/water nanofluid in a parabolic solar collector
30. Improvement of efficiency and PEC of parabolic solar collector containing EG-Cu-SWCNT hybrid nanofluid using internal helical fins
31. A hybrid parabolic trough solar collector system integrated with photovoltaics10.1016/j.apenergy.2022.120336 ↗
32. Design and testing of concentrated photovoltaic arrays for retrofitting of solar thermal parabolic trough collectors10.1016/j.apenergy.2021.117427 ↗
33. Thermal convection and solar radiation of electromagnetic actuator Cu–Al2O3/C3H8O2 and Cu–C3H8O2 hybrid nanofluids for solar collector optimization
34. Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams10.1016/j.apenergy.2012.07.026 ↗
35. Analysis of internal helically finned tubes for parabolic trough design by CFD tools10.1016/j.apenergy.2011.04.026 ↗
36. Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers10.1016/j.ijheatmasstransfer.2012.05.057 ↗
37. Numerical investigation of energy-efficient receiver for solar parabolic trough concentrator10.1080/01457630802125757 ↗
38. Numerical study of porous finned receiver for solar parabolic trough concentrator
39. Optimization of gaseous working fluid and internally finned absorber tube for enhancing the thermal performance of parabolic trough solar collector
40. Thermal performance analysis in a parabolic trough solar collector with a novel design of inserted fins10.1016/j.csite.2023.103378 ↗
41. Techniques for reducing thermal conduction and natural convection heat losses in annular receiver geometries10.1115/1.3450899 ↗
42. A detailed thermal model of a parabolic trough collector receiver10.1016/j.energy.2012.06.023 ↗
43. Behavior of the compound wall copper–steel receiver with stratified two-phase flow regimen in transient states when solar irradiance is arriving on one side of receiver
44. Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts10.1016/j.ijthermalsci.2015.08.015 ↗
45. Effects of glass cover on heat flux distribution for tube receiver with parabolic trough collector system10.1016/j.enconman.2014.11.004 ↗
46. A numerical study of parabolic trough receiver with nonuniform heat flux and helical screw-tape inserts10.1016/j.energy.2014.09.049 ↗
47. Investigation of heat transfer enhancement in a new type heat exchanger using solar parabolic trough systems10.1016/j.ijhydene.2015.03.009 ↗
48. Optimizing the configuration of external fins of solar receiver tubes for the solar parabolic trough collector10.1016/j.applthermaleng.2024.125317 ↗
49. Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector10.1016/j.renene.2014.12.016 ↗
50. Thermal analysis of solar parabolic trough with porous disc receiver10.1016/j.apenergy.2008.11.007 ↗
51. A design method of an S-curved parabolic trough collector absorber with a three-dimensional heat flux density distribution10.1016/j.solener.2015.10.002 ↗
52. Kajavali · 2014
53. Heat loss study of trapezoidal cavity absorbers for linear solar concentrating collector10.1016/j.enconman.2009.09.029 ↗
54. An experimental investigation of the heat losses of a U-type solar heat pipe receiver of a parabolic trough collector-based natural circulation steam generation system10.1016/j.renene.2013.01.029 ↗
55. Numerical optimization and convective thermal loss analysis of improved solar parabolic trough collector receiver system with one sided thermal insulation10.1016/j.solener.2017.02.051 ↗
56. A Monte Carlo method and finite volume method coupled optical simulation method for parabolic trough solar collectors10.1016/j.apenergy.2017.05.047 ↗
57. Experimental study on heat transfer enhancement of parabolic trough solar collector using a rectangular channel receiver10.1016/j.jtice.2022.104361 ↗
58. A design method and numerical study for a new type parabolic trough solar collector with uniform solar flux distribution10.1007/s11431-013-5452-6 ↗
59. Design and optimization of elliptical cavity tube receivers in the parabolic trough solar collector10.1155/2017/1471594 ↗
60. Numerical investigation and solar flux distribution analysis of parabolic trough solar collector by adding secondary reflector10.18280/i2m.180307 ↗
61. A new trough solar concentrator and its performance analysis10.1016/j.solener.2010.08.017 ↗
62. New second-stage concentrators (XX SMS) for parabolic primaries; comparison with conventional parabolic trough concentrators10.1016/j.solener.2013.02.011 ↗
63. Review of classical and nonlocal nanofluid models for solar collectors10.1016/j.rser.2025.115382 ↗
64. Features of nano TiO2 on metallographic and optical performance of polyvinyl alcohol nanocomposite film10.1007/s11082-024-06484-7 ↗
65. Excellence of nano SiC on mechanical behaviour of low density polyethylene hybrid nanocomposite10.1007/s40033-024-00713-9 ↗
66. Optimal thermal and thermodynamic performance of a solar parabolic trough receiver with different nanofluids and at different concentration ratios10.1016/j.apenergy.2017.02.064 ↗
67. A review of applications of green nanofluids for performance improvement of solar collectors
68. Experimental investigation on the thermal behavior of nanofluid direct absorption in a trough collector10.1016/j.jclepro.2017.04.131 ↗
69. Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method10.1016/j.solener.2012.02.039 ↗
70. Numerical study on heat transfer enhancement in a receiver tube of parabolic trough solar collector with dimples, protrusions and helical fins10.1016/j.egypro.2015.03.149 ↗
71. Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization10.1016/j.ijheatmasstransfer.2017.12.079 ↗
72. Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube10.1016/j.renene.2016.03.062 ↗
73. Numerical study of flow and heat transfer characteristics in outward convex corrugated tubes10.1016/j.ijheatmasstransfer.2012.08.007 ↗
74. Direct steam generation in parabolic trough concentrators with bimetallic receivers
75. Explicit expression for temperature distribution of receiver of parabolic trough concentrator considering bimetallic absorber tube10.1016/j.applthermaleng.2016.04.110 ↗
76. Parabolic trough solar collector for low enthalpy processes: an analysis of the efficiency enhancement by using twisted tape inserts10.1016/j.renene.2016.02.046 ↗
77. Jafar · 2014
78. 3-D numerical simulation of heat transfer and turbulent flow in a receiver tube of solar parabolic trough concentrator with louvered twisted-tape inserts10.1016/j.egypro.2014.03.040 ↗
79. Heat transfer enhancement in absorber tube of parabolic trough concentrators using wire-coils inserts10.13189/ujme.2015.030305 ↗
80. Optimization of porous insert configuration in a central receiver tube for heat transfer enhancement10.1016/j.egypro.2015.07.439 ↗
81. Bader · 2010
82. Experimental and numerical heat transfer analysis of a V-cavity absorber for linear parabolic trough solar collector10.1016/j.enconman.2014.05.001 ↗