journal article·2026-05Open access

The dark side of certain POE encapsulant: Chemical pathways to metallisation corrosion in TOPCon modules

Chandany Sen, Haoran Wang, Robert Heidrich, Marius Lüdemann, Muhammad Umair Khan, Bram Hoex

Abstract

N-type tunnel-oxide passivated contact (TOPCon) cell technology currently accounts for over 60 % of the PV market. Yet, its aluminium-rich front metallisation remains vulnerable to humidity-driven corrosion in glass/back-sheet modules. Building on our previous study, “Buyer Aware: Three new failure modes in TOPCon modules absent from PERC technology”, this work delves deeper into corrosion-induced degradation in TOPCon minimodules encapsulated with ethylene-vinyl acetate copolymer (EVA) and three commercially sourced polyolefin elastomers (POE-A, -B, and -C). After 1000 h of damp-heat exposure (85 °C, 85 % RH), the module with EVA showed a ∼11 % rel drop in P max , mainly attributed to a 50 % rel rise in series resistance (R s ). Spectroscopic analysis suggests that acetic acid released from EVA hydrolysis reacts with solder-flux residues, promoting front metal corrosion at the cell contacts. POE-A and POE-B modules degraded by only 6–10 % rel , neither produced measurable organic acids, and POE-A's antioxidant package appears to inhibit polymer oxidation, confining the residual loss to isolated pre-lamination contaminants. In contrast, POE-C suffered a 55 % rel in P max . Chemical probing reveals a potential cascade of mutually reinforcing reactions that generate a highly acidic micro-environment comprising: (i) carboxylic acids from POE oxidation, (ii) azelaic acid liberated from soldering flux, and (iii) benzoic and phenolic by-products from the ultraviolet (UV) absorber breakdown. This corrosive cocktail potentially accelerates the electrochemical attack on the front cell metallisation, driving a drastic R s increase and catastrophic module failure. The study highlights the pivotal influence of encapsulant formulation, antioxidant, UV absorber chemistry and manufacturing cleanliness on the long-term reliability of TOPCon modules. • EVA modules: ∼11 % rel P max loss due to R s increase caused by acetic acid reacting with soldering flux and corroding contac. • POE-A/B modules: 6-10% rel P max loss due to pre-lamination contaminants reacting with moisture; No acids in POE. • POE-C module: 55% rel P max loss caused by carboxylic acids due to UV absorber breakdown in POE and azelaic acid from flux.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. The value of stability in photovoltaics10.1016/j.joule.2021.10.019 ↗
2. Photovoltaics Equipment · 2024
3. Buyer aware: three new failure modes in TOPCon modules absent from PERC technology10.1016/j.solmat.2024.112877 ↗
4. Hidden traces: insights into how solar cell handling drives damp-heat failures in HJT and TOPCon modules10.1016/j.solmat.2025.113695 ↗
5. Unveiling the degradation mechanisms in silicon heterojunction solar cells under accelerated damp-heat testing10.1016/j.solmat.2024.113325 ↗
6. Reliability of commercial TOPCon PV Modules—An extensive comparative Study
7. Comparison of commercial TOPCon PV modules in accelerated aging tests
8. Effect of firing temperature on damp heat stability of n-TOPCon solar cells' rear side10.1002/solr.202500299 ↗
9. Corrosion effects in bifacial crystalline silicon PV modules; interactions between metallization and encapsulation10.1016/j.solmat.2023.112321 ↗
10. Damp-heat stability investigation of glass-backsheet modules based on TOPCon solar cells10.1016/j.solmat.2025.113764 ↗
11. Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride10.1016/j.solmat.2023.112554 ↗
12. Unveiling the origin of metal contact failures in TOPCon solar cells through accelerated damp-heat testing10.1016/j.solmat.2024.113188 ↗
13. Assessing the impact of solder flux-induced corrosion on TOPCon solar cells10.1016/j.solmat.2025.113890 ↗
14. Regulation to Ag–Al spikes through silver aluminum paste with Al–Si alloy10.1016/j.solmat.2024.112968 ↗
15. Role of aluminum in silver paste contact to boron-doped silicon emitters
16. Enhancing the reliability of TOPCon technology by laser-enhanced contact firing10.1016/j.solmat.2024.112846 ↗
17. Mechanical properties of EVA-based encapsulants
18. Comparison of degradation behavior of newly developed encapsulation materials for photovoltaic applications under different artificial ageing tests10.3390/polym13020271 ↗
19. Effect of backsheet properties on PV encapsulant degradation during combined accelerated aging tests10.3390/su12125208 ↗
20. Thermal behaviors of ethylene vinyl acetate encapsulants in fielded silicon photovoltaic modules10.1002/app.54337 ↗
21. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules10.1002/pip.3323 ↗
22. Lower levelized cost of energy achievement of silicon heterojunction solar modules with low water vapor transmission rate encapsulants10.1002/ente.202201466 ↗
23. J.I. · 2017
24. Quantification of UV protecting additives in ethylene-vinyl acetate copolymer encapsulants for photovoltaic modules with pyrolysis-gas chromatography-mass spectrometry10.1016/j.polymertesting.2022.107913 ↗
25. The influence of soldering flux on stability of heterojunction and TOPCon solar cells
26. Four failure modes in silicon heterojunction glass-backsheet modules10.1016/j.solmat.2023.112358 ↗
27. Detection of finger interruptions in silicon solar cells using line scan photoluminescence imaging10.1109/JPHOTOV.2017.2732220 ↗
28. Analysis of accelerated damp heat Test for degradation analysis and recovery method of Photovoltaic module10.1002/ente.202200707 ↗
29. Stuart · 2004
30. Effect of UV aging on degradation of ethylene-vinyl Acetate (EVA) as encapsulant in photovoltaic (PV) modules
31. 6.3 IR spectrum and characteristic absorption bands
32. Smith · 2018 · vol. 33 · 20
33. Infrared spectra of salts and complexes of carboxylic acids and some of their derivatives10.1070/RC1963v032n04ABEH001329 ↗
34. D. Kennepohl, S. Farmer, W. Reusch, 11.5: infrared Spectra of some common functional groups, Via Libre (2020). https://chem.libretexts.org/Bookshelves/Organic_Chemistry/Map%3A_Organic_Chemistry_(Wade)_Complete_and_Semesters_I_and_II/Map%3A_Organic_Chemistry_(Wade)/11%3A_Infrared_Spectroscopy_and_Mass_Spectrometry/11.05%3A_Infrared_Spectra_of_Some_Common_Functional_Groups. (Accessed 9 August 2025).
35. Internal reflection spectroscopy for FTIR analysis of carboxylate adsorption by semi-soluble salt minerals
36. Interpretation of the infrared Spectra of metal-stearate salts10.1177/27551857241253834 ↗
37. Determination of the carbonyl index of polyethylene and polypropylene using specified area under band methodology with ATR-FTIR spectroscopy10.1515/epoly-2020-0041 ↗
38. Crystalline Si photovoltaic modules functionalized by a thin polyethylene film against potential and damp-heat-induced degradation10.1039/C4RA13360A ↗
39. Spectroscopic investigation of long-term outdoor-exposed crystalline silicon photovoltaic modules10.1016/j.jphotochem.2020.112891 ↗
40. Effect of global damp heat ageing on debonding of crosslinked EVA- and POE-glass laminates10.1016/j.solmat.2023.112602 ↗
41. Crosslinking behavior of ethylene-vinyl acetate copolymer encapsulants in dependence of the additive composition
42. Possibilities and limits of synergism with light stabilizers in polyolefins 2. UV absorbers in polyolefins10.1016/S0141-3910(01)00232-4 ↗
43. From performance measurements to molecular level characterization: exploring the differences between ultraviolet and damp heat weathering of photovoltaics modules10.1002/solr.202400144 ↗
44. Oxidation and crosslinking processes during thermal aging of low-density polyethylene films10.1002/app.34080 ↗
45. The mechanism of polyethylene oxidation10.1002/app.1959.070020604 ↗
46. Thermal oxidation products and kinetics of polyethylene composites10.1016/j.polymdegradstab.2005.12.013 ↗
47. I. Bauer, W.D. Habicher, " C Rautenberg, S. Al-Malaikab, Antioxidant Interaction Between Organic Phosphites and Hindered Amine Light Stabilisers During Processing and Thermoxidation of Polypropylene, n.d.
48. Mechanisms of antioxidant action of phosphite and phosphonite esters
49. Ligner, Hindered amine light stabilizers: introduction
50. Carbonyl identification and quantification uncertainties for oxidative polymer degradation10.1016/j.polymdegradstab.2021.109550 ↗
51. Influence of lamination conditions of EVA encapsulation on photovoltaic module durability10.3390/ma16216945 ↗
52. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
53. Effects of organic peroxides on the curing behavior of EVA encapsulant resin10.4236/ojpchem.2012.22010 ↗
54. Kinetic and thermodynamic investigation on diffusion-limited crosslinking reaction behaviors of peroxide-induced low-density polyethylene10.1016/j.polymertesting.2023.108095 ↗
55. Artificial solid electrolyte interphase composed of a tris(2-acryloyloxyethyl) isocyanurate-based polymer for lithium metal anode10.1039/D5EB00109A ↗
56. Further discussion of the specific polymerization behavior of Triallyl isocyanurate
57. Temperature-dependent synergistic antioxidants for high-efficiency modulation of anti-scorch performance and crosslinking degree in peroxide-initiated low-density polyethylene10.1016/j.matlet.2024.136211 ↗
58. Effect of hindered phenolic antioxidants on crosslinking characteristics of low-density polyethylene initiated by peroxide10.1016/j.egyr.2023.04.275 ↗
59. Diffusion of UV additives in ethylene-vinyl acetate copolymer encapsulants and the impact on polymer reliability10.1109/JPHOTOV.2023.3333198 ↗
60. Moulder · 1992
61. XPS analysis of damp heat aged and fractured polymer/glass laminates10.1016/j.polymertesting.2024.108617 ↗
62. New PV encapsulants: assessment of change in optical and thermal properties and chemical degradation after UV aging10.1016/j.polymdegradstab.2023.110643 ↗
63. Review on the thermo-oxidative degradation of polymers during processing and in service10.1515/epoly.2008.8.1.727 ↗
64. Review of polymer oxidation and its relationship with materials performance and lifetime prediction10.1016/j.polymdegradstab.2013.06.024 ↗
65. Additives for polyolefin film products: an overview of chemistry and effects
66. Polyethylene hydroperoxide decomposition products10.1016/0141-3910(91)90125-B ↗
67. Soldering flux causes corrosion of indium tin oxide electrode in heterojunction solar cells
68. Solder flux residues and humidity-related failures in electronics: relative effects of weak organic acids used in No-Clean flux systems10.1007/s11664-014-3609-0 ↗
69. Klemchuk · 1997
70. Photo- and thermal-oxidation of polyethylene: comparison of mechanisms and influence of unsaturation content10.1016/j.polymdegradstab.2013.07.017 ↗
71. Thermal degradation of crosslinked high density polyethylene10.1016/S0141-3910(98)00098-6 ↗
72. Electron spin resonance as a tool to monitor the influence of novel processing technologies on food properties10.1016/j.tifs.2020.03.032 ↗
73. Investigation on the degradation of benzophenone-3 by UV/H2O2 in aqueous solution10.1016/j.cej.2015.04.078 ↗
74. Ohimc contact Formation mechanism of silver–aluminum paste metallization on the p + emitter of n-Type crystalline silicon solar cells10.1007/s11664-022-09821-2 ↗
75. Aluminum oxide thin films from aqueous solutions: insights from solid-state NMR and dielectric response10.1021/acs.chemmater.7b05078 ↗
76. An improved exfoliation Test for aluminum alloys
77. Branzoi · 2002
78. Molecular mechanisms for corrosion of silica and silicate glasses10.1016/0022-3093(94)90708-0 ↗
79. The corrosion of lead by dilute aqueous organic acids10.1002/jctb.5010080511 ↗
80. Corrosion mechanism analysis of the front-side metallization of a crystalline silicon PV module by a high-temperature and high-humidity test10.35848/1347-4065/ab8274 ↗
81. Caloritech, Technical data - galvanic corrosion, n.d. https://content.thermon.com/pdf/Caloritech/Catalog/Caloritech_Technical_Data_Corrosion.pdf (accessed August 19, 2025).
82. Galvanic series of metals and alloys in seawater
83. Basic concepts in corrosion