journal article·2026-05Open access

Efficient 3D Solar Evaporator for water-cleaning/seawater-desalination made with Loofah coated with graphite recycled from alkaline/spent batteries

E. Valadez-Renteria, E. Monroy-Sandoval, L.M. Prieto-Zuleta, A.C. Hernandez-Arteaga, V. Rodriguez-Gonzalez, J. Oliva

Abstract

Solar steam generation (SSG) devices are a promising alternative for producing fresh water from seawater and polluted matrices. This study evaluates graphite recycled from spent lithium (CLB) and alkaline carbon-zinc batteries (CZB) for their application as photothermal materials in evaporation processes. A 3D loofah sponge served as the structural support for the fabricated steam evaporators, which were coated with graphite recycled from alkaline/lithium batteries. The evaporator coated with CZB achieved an evaporation rate of 2.22 kg/m 2 h, while the evaporator coated CLB reached the higher evaporation rate of 2.4 kg/m 2 h under natural sunlight exposition. The most efficient solar evaporators were successfully tested for the purification of tap water contaminated with the recalcitrant pollutants (20 ppm) ambroxol (ABX) and glyphosate (GYL). Absorbance analysis of the evaporated water confirmed the complete purification of tap water, that is, the complete elimination of ABX and GYL from the water. The superior performance of solar evaporator made with CLB over that made with CZB is attributed to three main factors: i) enhanced optical absorbance in the visible region, ii) higher hydrophilicity and iii) higher content of defect, which facilitates the heat localization and minimizes the thermal loss. Overall, this study confirms that utilizing recycled graphite from batteries for SSG applications is a feasible strategy for developing high-performance devices capable of water desalination/cleaning. • Solar evaporators were made by coating loofah with graphite recycled from spent batteries. • Solar evaporators made with graphite recycled from LIBs produced an evaporation rate of 2.4 kg/m 2 h. • Solar evaporators made with graphite recycled from alkaline batteries had evaporation rate of 2.22 kg/m 2 h. • Solar evaporators also eliminated ambroxol and glyphosate (20 ppm) from tap water. • Intrinsic Mn, Zn, Li, Fe ions and defects in recovered graphite enhanced the evaporation efficiency by 6.6 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Membrane Separation Technologies · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Challenges and solutions for global water scarcity10.3390/membranes13060612 ↗
2. A wall-like solar-driven interfacial evaporator fabricated via out-inner anisotropic structure of fresh loofah10.1016/j.indcrop.2025.120568 ↗
3. Agriculture development, pesticide application and its impact on the environment10.3390/ijerph18031112 ↗
4. A comprehensive review on environmental and human health impacts of chemical pesticide usage10.1016/j.emcon.2024.100410 ↗
5. Pesticides impacts on human health and the environment with their mechanisms of action and possible countermeasures10.1016/j.heliyon.2024.e29128 ↗
6. Impacts of pharmaceutical effluents on aquatic ecosystems
7. Pharmaceutical pollution in aquatic environments: a concise review of environmental impacts and bioremediation systems10.3389/fmicb.2022.869332 ↗
8. Degradation of ambroxol by UV/chloramine process: Kinetics, degradation pathway, and control of the risk of highly toxic disinfection by-products10.1016/j.envpol.2024.125091 ↗
9. Natural sunlight driven phototransformation of the expectorant drug ambroxol in fresh waters10.1039/D5EM00205B ↗
10. Removal efficiency for emerging contaminants in a WWTP from Madrid (Spain) after secondary and tertiary treatment and environmental impact on the manzanares river10.1016/j.scitotenv.2021.152567 ↗
11. RuO2− MXene nanocomposite coated on bio-degradable loofah sponge for enhanced rate of evaporation in interfacial solar desalination10.1016/j.rineng.2024.103450 ↗
12. Engineering materials to enhance light-to-heat conversion for efficient solar water purification10.1021/acs.iecr.2c03170 ↗
13. Atmospheric water harvester-assisted solar steam generation for highly efficient collection of distilled water10.1039/D1TA10040H ↗
14. The application of cellulosic‐based materials on interfacial solar steam generation for highly efficient wastewater purification: a review10.1002/cey2.540 ↗
15. Interconnected porous fabric-based scalable evaporator with asymmetric wetting properties for high-yield and salt-rejecting solar brine treatment10.1007/s42765-024-00409-5 ↗
16. Designing carbonized loofah sponge architectures with plasmonic Cu nanoparticles encapsulated in graphitic layers for highly efficient solar vapor generation10.1021/acs.nanolett.0c04511 ↗
17. Thomas · 2025
18. Biomass‐based materials for sustainably sourced solar‐driven interfacial steam generation10.1002/adem.202300778 ↗
19. High-performance solar steam generator using low-cost biomass waste photothermal material and engineering of the structure10.1021/acsomega.2c04146 ↗
20. Highly efficient interfacial solar steam generation using carbonized Loofah-Cu2O composite10.1016/j.jallcom.2025.180883 ↗
21. High-performance desalination systems from natural luffa Vine: a simple, efficient and environmentally friendly solution for bio-based solar evaporators10.1016/j.jclepro.2023.136817 ↗
22. An ‘antifouling’porous loofah sponge with internal microchannels as solar absorbers and water pumpers for thermal desalination10.1039/D0TA03872E ↗
23. A multi-layer interfacial evaporator system for efficient freshwater production utilizing PANI-modified membrane, loofah sponge, and foam
24. Biomass derived janus solar evaporator for synergic water evaporation and purification10.1016/j.susmat.2020.e00180 ↗
25. Carbon nanofibers enhanced solar steam generation device based on loofah biomass for water purification10.1016/j.matchemphys.2020.123998 ↗
26. High efficiency solar interfacial evaporator for seawater desalination based on high porosity loofah sponge biochar10.1016/j.solener.2022.04.044 ↗
27. Solar driven interfacial steam generation derived from biodegradable luffa sponge
28. Architecting biomimetic loofah sponges modified with MoS2/rGO for sustainable solar-driven interfacial evaporation10.1016/j.diamond.2025.112537 ↗
29. Advancing solar energy applications with graphene: the potential of minimally oxidized graphene10.1186/s40580-025-00498-x ↗
30. Solid waste and graphite derived solar steam generator for highly-efficient and cost-effective water purification10.1016/j.apenergy.2019.114410 ↗
31. Transformation of graphite recovered from batteries into functionalized graphene-based sorbents and application to gas desulfurization10.3390/molecules29153577 ↗
32. Recycling spent LiFePO4 battery for fabricating visible-light photocatalyst with adsorption-photocatalytic synergistic performance and simultaneous recovery of lithium and phosphorus10.1016/j.cej.2022.138388 ↗
33. Aquatic photolysis of the pharmaceutical ambroxol: the role of 2, 4-dibromoaniline chromophore and heavy atom effect of bromine10.1016/j.watres.2022.119275 ↗
34. Exposure risk and environmental impacts of glyphosate: highlights on the toxicity of herbicide co-formulants
35. Effect of pre-treatment of Luffa fibres on the structural properties10.1016/j.matlet.2008.09.008 ↗
36. Preparation of mannitol-modified loofah and its high-efficient adsorption of Cu (II) ions in aqueous solution10.3390/polym14224883 ↗
37. Relationship between moisture transportation, efflorescence and structure degradation in fly ash/slag geopolymer10.3390/ma13235550 ↗
38. Effect of Na2CO3 on the microstructure and macroscopic properties and mechanism analysis of PVA/CMC composite film10.3390/polym12020453 ↗
39. Staging Na/K-ion de-/intercalation of graphite retrieved from spent Li-ion batteries: in operando X-ray diffraction studies and an advanced anode material for Na/K-ion batteries10.1039/C9EE02759A ↗
40. Selecting the best graphite for long-life, high-energy Li-ion batteries10.1149/2.1111809jes ↗
41. Efficient electrochemical performance of ZnMn2O4 nanoparticles with rGO nanosheets for electrodes in supercapacitor applications10.1007/s10854-017-8268-5 ↗
42. Zinc oxide nanoparticles from waste Zn-C battery via thermal route: characterization and properties10.3390/nano8090717 ↗
43. Enhanced electrochemical performances of Li2MnO3 cathode materials by Al doping10.1007/s11581-017-2189-4 ↗
44. The effect of crystal face of Fe2O3 on the electrochemical performance for lithium-ion batteries
45. Direct observation of lithium polysulfides in lithium–sulfur batteries using operando X-ray diffraction10.1038/nenergy.2017.69 ↗
46. Fabrication and performance of a novel 3D superhydrophobic material based on a loofah sponge from plant10.1016/j.matlet.2018.07.072 ↗
47. The double-edged effect of water on Li-O2 aprotic batteries10.1149/1945-7111/acc2ea ↗
48. Hygroscopic growth and phase transitions of Na2CO3 and mixed Na2CO3/Li2CO3 particles: influence of Li2CO3 on phase transitions of Na2CO3 and formation of LiNaCO310.1021/acs.jpca.0c08891 ↗
49. Modified natural loofah sponge as an effective heavy metal ion adsorbent: amidoxime functionalized poly (acrylonitrile-g-loofah)10.1016/j.cherd.2019.07.021 ↗
50. Efficient scavenging of Cr (VI) via radiation preparation of amino-functionalized agricultural waste loofah: behavior and mechanism insight10.1016/j.colsurfa.2025.136693 ↗
51. High‐yield carbon dots interlayer for ultra‐stable zinc batteries
52. New perception of Zn (II) and Mn (II) removal mechanism on sustainable sunflower biochar from alkaline batteries contaminated water10.1016/j.jenvman.2021.112757 ↗
53. Effects of ammonium chloride on the yield of carbon nanofiber aerogels derived from cellulose nanofibrils10.1007/s10570-019-02645-0 ↗
54. Challenges and protective strategies on zinc anode toward practical aqueous zinc‐ion batteries10.1002/cnl2.109 ↗
55. Recycling of a spent alkaline battery as a catalyst for the total oxidation of hydrocarbons10.1016/j.jhazmat.2020.123929 ↗
56. Separation and recovery of carbon powder in anodes from spent lithium-ion batteries to synthesize graphene10.1038/s41598-019-46393-4 ↗
57. On the decomposition of carbonate-based lithium-ion battery electrolytes studied using operando infrared spectroscopy10.1149/2.1051816jes ↗
58. Solid state vibrational spectroscopy of anhydrous lithium hexafluorophosphate (LiPF6)10.1016/j.molstruc.2012.05.053 ↗
59. Electrode-electrolyte interface characterization of carbon electrodes in Li-O2 batteries: capabilities and limitations of infrared spectroscopy10.1016/j.electacta.2015.12.061 ↗
60. Theoretical evaluation of the evaporation rate of 2D solar-driven interfacial evaporation and of its large-scale application potential10.1016/j.desal.2022.115891 ↗
61. Hofmeister effect‐assisted facile fabrication of self‐assembled poly (Vinyl Alcohol)/Graphite composite sponge‐like hydrogel for solar steam generation
62. Use of multivariate calibration models based on UV-Vis spectra for seawater quality monitoring in Tianjin Bohai Bay10.2166/wst.2015.110 ↗
63. Structural, spectral analysis of ambroxol using DFT methods10.1016/j.molstruc.2017.04.116 ↗
64. UV–vis spectrophotometric analysis and quantification of glyphosate for an interdisciplinary undergraduate laboratory10.1021/acs.jchemed.7b00440 ↗
65. Efficient low-frequency microwave absorption and solar evaporation properties of γ-Fe2O3 nanocubes/graphene composites10.1016/j.cej.2020.126676 ↗
66. Recent advances in carbon‐based materials for solar‐driven interfacial photothermal conversion water evaporation: assemblies, structures, applications, and prospective10.1002/cey2.331 ↗
67. Surface modification with oxygen vacancy in LiNi0.5Co0.2Mn0.3O2 for lithium-ion batteries10.1016/j.jallcom.2021.160626 ↗
68. Defect engineering on electrode materials for rechargeable batteries
69. A review of the coefficient of thermal expansion and thermal conductivity of graphite10.1016/S1872-5805(22)60603-6 ↗
70. Effect of phonon scattering by substitutional and structural defects on thermal conductivity of 2D graphene10.1088/1361-648X/aacabe ↗
71. Rational design of high‐performance bilayer solar evaporator by using waste polyester‐derived porous carbon‐coated wood10.1002/eem2.12199 ↗
72. Photothermal nanomaterials: a powerful light-to-heat converter10.1021/acs.chemrev.3c00159 ↗
73. The rise of 2D photothermal materials beyond graphene for clean water production10.1002/advs.201902236 ↗
74. Sustainable wood-based hierarchical solar steam generator: a biomimetic design with reduced vaporization enthalpy of water10.1021/acs.nanolett.0c01088 ↗
75. Water activation in solar‐powered vapor generation10.1002/adma.202212100 ↗
76. A polyelectrolyte hydrogel coated loofah sponge evaporator based on Donnan effect for highly efficient solar-driven desalination10.1016/j.cej.2023.142265 ↗