journal article·2026-01Open access

Using thin AZO layers coupled with SiNx:H as a way to decrease Indium consumption in SHJ cells and modules

Tristan Gageot, Frédéric Jay, Jordi Veirman, David Muñoz-Rojas

Abstract

In this work, we investigate the possibility of replacing Indium-rich transparent conductive oxides (TCO) with previously untested thin aluminum-doped zinc oxide (AZO) layers (50 to 30 nm) as a way to remove Indium in SHJ solar cells and modules. In order to maintain optical properties and possibly to increase the damp heat reliability of the modules using those thin AZO layers, optically optimized SiNx:H capping layers were used. The AZO deposition conditions were fine-tuned (varying the gas flows), and the best AZO/SiNx:H combinations were then selected based on the output of optical simulations, fed with characterization results. On the front side, when deposited on the classical (n) a-Si:H selective layers, the thinner AZO layers yielded lower FF due to higher contact resistivity as well as higher Rsheet. However, when deposited on (n) nc-Si:H, the contact resistivity was drastically lowered, allowing cells with 30 nm AZO layers to achieve comparable efficiencies as the cells incorporating ITO layers both at cell (22.88%) and module (21.67%) scale. On the rear side, the AZO layers yielded -0.5%abs efficiency losses compared to the reference cells, due to both FF and Jsc losses. Reliability tests in damp heat environment (up to 1000 h) were conducted and showed that on the front side, thinner AZO layers show increased sensibility to humidity, and that SiNx:H layers increase the degradation. On the rear side, AZO layers suffer less from humidity degradation, and the resistance is enhanced with a 10 nm ITO capping layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. 2025
2. Baliozian, D.P. Technology Trends and Insights from the International Technology Roadmap for PV (ITRPV).
3. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
4. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
5. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
6. Cruz · 2020 · vol. 10
7. Field assessment of transparent conductive oxides stability under outdoor conditions
8. Influence of oxygen on sputtered titanium-doped indium oxide thin films and their application in silicon heterojunction solar cells10.1002/solr.202000501 ↗
9. Comparative study on IWO and ICO transparent conductive oxide films prepared by reactive plasma deposition for copper electroplated silicon heterojunction solar cell10.1007/s10854-021-07689-2 ↗
10. High-mobility IWO films deposited in nonreactive plasma by RF sputtering
11. The sputter deposition of broadband transparent and highly conductive cerium and hydrogen co‐doped indium oxide and its transfer to silicon heterojunction solar cells10.1002/pip.3388 ↗
12. Cerium oxide and hydrogen Co-Doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
13. Silicon heterojunction solar cells with nanocrystalline silicon oxide emitter for achieving high fill factor10.1021/acsnano.5c03395 ↗
14. Highly conductive and broadband transparent Zr-Doped in 2 O 3 as front electrode for solar cells10.1109/JPHOTOV.2018.2851306 ↗
15. IZO/ITO double-layered transparent conductive oxide for silicon heterojunction solar cells10.1109/ACCESS.2022.3192646 ↗
16. Influence of Al2O3/IZO double-layer antireflective coating on the front side of rear emitter silicon heterojunction solar cell10.1016/j.vacuum.2022.110967 ↗
17. Status and perspectives of transparent conductive oxide films for silicon heterojunction solar cells10.1016/j.mtnano.2023.100329 ↗
18. 85% indium reduction for high-efficiency silicon heterojunction solar cells with aluminum-doped zinc oxide contacts10.1016/j.solmat.2022.112120 ↗
19. Highly efficient silicon heterojunction solar cells with zno:al transparent electrode and transition metal doped indium oxide interfacial layer
20. Anamaria steinmetz reduction of resource critical materials in the SHJ production
21. Stefan Janke approches for SHJ cells with low or no indium content
22. Application of indium Tin Oxide/Aluminum-doped zinc oxide transparent conductive oxide stack films in silicon heterojunction solar cells10.1021/acsaem.1c02209 ↗
23. Reducing indium consumption in silicon hetero junction solar cells with TCO stack systems of ITO and AZO10.1109/JPHOTOV.2023.3267175 ↗
24. Improved opto-electronic properties of silicon heterojunction solar cells with SiO x/Tungsten-Doped indium oxide double anti-reflective coatings10.7567/JJAP.56.08MB09 ↗
25. Surface passivation of ITO on heterojunction solar cells with enhanced cell performance and module reliability10.1149/2162-8777/abeece ↗
26. Paths for maximal light incoupling and excellent electrical performances in silicon heterojunction solar cells
27. Optoelectrical analysis of TCO+Silicon oxide double layers at the front and rear side of silicon heterojunction solar cells
28. ITO/SiOx:H stacks for silicon heterojunction solar cells10.1016/j.solmat.2016.05.024 ↗
29. Heitmann, U. Substitution of ITO by a Low-Cost Sprayed Tiox Capping Layer for SHJ Solar Cells. vol. 5.
30. Towards bifacial silicon heterojunction solar cells with reduced TCO use
31. Design and fabrication of a SiOx/ITO double-layer anti-reflective coating for heterojunction silicon solar cells10.1016/j.solmat.2013.05.044 ↗
32. Damp-heat-stable, high-efficiency, industrial-size silicon heterojunction solar cells10.1016/j.joule.2020.03.003 ↗
33. Feasibility test of drastic indium cut down in SHJ solar cells and modules using ultra-thin ITO layers10.1016/j.solmat.2023.112512 ↗
34. Transparent-conductive-oxide-free front contacts for high-efficiency silicon heterojunction solar cells10.1016/j.joule.2021.04.004 ↗
35. Enabling transparent-conductive-oxide free efficient heterojunction solar cells by flexibly using dopant-free contact
36. Influence of silicon layers on the growth of ITO and AZO in silicon heterojunction solar cells10.1109/JPHOTOV.2019.2957665 ↗
37. ITO-free silicon heterojunction solar cells with ZnO:Al/SiO 2 front electrodes reaching a conversion efficiency of 23%10.1109/JPHOTOV.2018.2873307 ↗
38. Amorphous SnO2 as Earth-Abundant Stable Transparent Conductive Oxide and Its Application to Si Heterojunction Solar Cells10.1002/solr.202300381 ↗
39. Aluminium-doped zinc oxide rear reflectors for high-efficiency silicon heterojunction solar cells
40. Bottom-Up and top-down approaches for identifying and mitigating electrical losses in silicon heterojunction solar cells10.1109/JPHOTOV.2022.3176983 ↗
41. Integration of thin N-Type Nc-Si:H layers in the window-multilayer stack of heterojunction solar cells10.1016/j.solmat.2022.111975 ↗
42. Light-induced performance increase of silicon heterojunction solar cells10.1063/1.4964835 ↗
43. Towards an industrial In-Line solution for efficient post-treatment of silicon heterojunction solar cells10.1016/j.solmat.2022.111867 ↗
44. Effects of oxygen flow ratio and thermal annealing on defect evolution of aluminum doped zinc oxide thin films by reactive DC magnetron sputtering10.1088/1361-648X/ac1f50 ↗
45. Effects of oxygen flux on the aluminum doped zinc oxide thin films by direct current magnetron sputtering10.1016/j.phpro.2012.03.619 ↗
46. Influence of oxygen partial pressure on transparency and conductivity of RF sputtered Al-Doped ZnO thin films10.1016/S0169-4332(99)00517-6 ↗
47. Hydrogenated aluminium-doped zinc oxide semiconductor thin films for polymeric light-emitting diodes10.1088/0268-1242/21/1/009 ↗
48. Effects of hydrogen flux on the properties of Al-Doped ZnO films sputtered in Ar+H2 ambient at low temperature10.1016/j.apsusc.2006.06.049 ↗
49. Ray · 2011
50. Increasing the electron mobility of ZnO-Based transparent conductive films deposited by open-air methods for enhanced sensing performance10.1021/acsanm.8b01745 ↗
51. Lipovšek · 2011 · vol. 8
52. Potential‐free sodium‐induced degradation of silicon heterojunction solar cells
53. Failure modes of silicon heterojunction photovoltaic modules in damp heat environment: sodium and moisture effects10.1016/j.solmat.2024.113190 ↗
54. Study and mitigation of moisture-induced degradation in SHJ modules by modifying cell structure10.1016/j.solmat.2025.113557 ↗