journal article·2025-12

High resolution study of thermal interfacial oxides in doped polycrystalline silicon passivating contacts

Anitta Rose Varghese, Rabin Basnet, Kean Chern Fong, Sieu Pheng Phang, Christian Samundsett, Stephane Armand, Felipe Kermer, Frank Brink, Daniel Macdonald

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
2. Mette · Sol. Energy Mater. Sol. Cell. · 2024 · 27710.1016/j.solmat.2024.113110 ↗
3. Polysilicon passivating contacts in mass production: the pursuit of higher efficiencies10.1109/JPHOTOV.2023.3329642 ↗
4. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
5. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
6. Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts10.1016/j.solmat.2022.112123 ↗
7. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
8. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPoly™ solar cells10.1016/j.solener.2020.03.087 ↗
9. Current status and challenges for hole-selective poly-silicon based passivating contacts10.1063/5.0185379 ↗
10. Phosphorus diffused LPCVD polysilicon passivated contacts with in-situ low pressure oxidation10.1016/j.solmat.2018.06.039 ↗
11. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
12. Improved silicon oxide/polysilicon passivated contacts for high efficiency solar cells via optimized tunnel layer annealing10.1016/j.solmat.2020.110720 ↗
13. Comparative study of different silicon oxides used as interfacial passivation layer (siNy:H/SiOx/n+-Si) in industrial monocrystalline silicon solar cells10.1016/j.solmat.2019.110077 ↗
14. Enhanced passivation effect of tunnel oxide prepared by ozone-gas oxidation (OGO) for n-Type polysilicon passivated contact (TOPCon) solar cells
15. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
16. Mass production of crystalline silicon solar cells with polysilicon-based passivating contacts: an industrial perspective10.1002/pip.3618 ↗
17. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
18. Influence of SiOx film thickness on electrical performance and efficiency of TOPCon solar cells10.1016/j.solmat.2020.110423 ↗
19. Impurity gettering in polycrystalline-silicon based passivating contacts—the role of oxide stoichiometry and pinholes10.1002/aenm.202103773 ↗
20. On the recombination behavior of p-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces10.1002/pssa.201700058 ↗
21. Contact formation of silver paste and atmospheric pressure chemical vapor deposition (n) poly-silicon passivating contacts on planar and textured surfaces10.1002/pssa.202200501 ↗
22. High-resolution structural investigation of passivated interfaces of silicon solar cells10.1016/j.solmat.2015.06.051 ↗
23. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
24. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
25. D. E. Kane and R. M. Swanson, 1985.
26. Extended cox & strack analysis for the contact resistance of planar samples with carrier-selective junctions on both sides10.1016/j.solmat.2021.111304 ↗
27. Effect of crystallographic orientation and nanoscale surface morphology on poly-Si/SiOx contacts for silicon solar cells10.1021/acsami.9b11889 ↗
28. Kinetics of thermal growth of ultra‐thin layers of SiO2 on silicon: i . Experiment10.1149/1.2404245 ↗
29. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗
30. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
31. Polysilicon passivating contacts for silicon solar cells: interface passivation and carrier transport mechanism10.1021/acsaem.8b02149 ↗
32. Poly-SiOx passivating contacts with plasma-assisted N2O oxidation of silicon (PANO-SiOx)10.1002/solr.202300186 ↗
33. Gettering in PolySi/SiOx passivating contacts enables Si-Based tandem solar cells with high thermal and contamination resilience10.1021/acsami.2c00319 ↗
34. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
35. 24.7% industrial tunnel oxide passivated contact solar cells prepared through tube PECVD integrating with plasma-assisted oxygen oxidation and in-situ doped polysilicon10.1016/j.solmat.2023.112396 ↗
36. Plasma treatment for chemical SiOx enables excellent passivation of p-type polysilicon passivating contact featuring the lowest J0 of ∼6 fA/cm210.1016/j.solmat.2023.112354 ↗
37. Excellent surface passivation of p-type TOPCon enabled by ozone-gas oxidation with a single-sided saturation current density of ∼ 4.5 fA/cm210.1016/j.solener.2023.05.028 ↗