journal article·2024-10

Inverse design optimization of the spatial distribution of emissivity for radiative transfer problems based on adjoint method

Ming Liu, Yosuke Hasegawa

Publisher page

Abstract

Due to the importance of radiation in various industrial applications, both forward and inverse problems of radiative transfer attract increasing attention in recent years. The emissivity is one of key properties of a solid surface and it can significantly affect radiation fields, while existing inverse design optimization schemes for the emissivity commonly have significant limitations in the degrees of freedom of design variables to be optimized. In this study, a continuous adjoint method is developed for the inverse design optimization of the spatial distribution of the emissivity for radiative transfer problems. We apply the developed strategy to two inverse design problems, i.e., estimation and optimization of the emissivity distribution. In the former, we demonstrate that the spatial distribution of emissivity in a complex geometry can be estimated based on limited temperature measurements in a domain. For the latter, we successfully optimize the spatial distribution of the emissivity to significantly improve the thermal absorption efficiency of a square honeycomb model.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Radiative Heat Transfer Studies · Calibration and Measurement Techniques · Urban Heat Island Mitigation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Thermal radiation characteristics in dilute phase region of the oxy-fuel combustion pressurized fluidized bed10.1016/j.applthermaleng.2020.115659 ↗
2. Coupled radiative gasdynamic interaction and non-equilibrium dissociation for large-scale returned space vehicles10.1016/j.chemphys.2011.10.024 ↗
3. Numerical simulation of heat transfer in packed pebble beds: CFD-DEM coupled with particle thermal radiation10.1016/j.ijheatmasstransfer.2017.03.035 ↗
4. Research challenges in combustion and gasification arising from emerging technologies employing directly irradiated concentrating solar thermal radiation10.1016/j.proci.2016.07.044 ↗
5. Recent progress in computational thermal radiative transfer10.1007/s11434-009-0625-1 ↗
6. The Monte Carlo method in radiative heat transfer10.1115/1.2824310 ↗
7. Discrete ordinate method with a new and a simple quadrature scheme10.1016/j.jqsrt.2005.11.018 ↗
8. Investigation of radiative heat transfer in complex geometries using blocked-off, multiblock, and embedded boundary treatments10.1080/713838148 ↗
9. Fixed Cartesian grid based numerical model for solidification process of semi-transparent materials I: modelling and verification10.1016/j.ijheatmasstransfer.2012.03.078 ↗
10. Solution of radiative-convective heat transfer in irregular geometries using hybrid lattice Boltzmann-finite volume and immersed boundary method10.1016/j.icheatmasstransfer.2021.105595 ↗
11. Volume penalization method for solving coupled radiative-conductive heat transfer problems in complex geometries10.1016/j.ijheatmasstransfer.2022.123499 ↗
12. Optimal geometry design of radiative enclosures using the genetic algorithm10.1080/10407780601115020 ↗
13. Inverse boundary design radiation problem with radiative equilibrium in combustion enclosures with PSO algorithm10.1016/j.icheatmasstransfer.2015.08.009 ↗
14. Inverse geometry design of two-dimensional complex radiative enclosures using krill herd optimization algorithm10.1016/j.applthermaleng.2016.01.017 ↗
15. Simultaneous reconstruction of thermal boundary condition and physical properties of participating medium10.1016/j.ijthermalsci.2021.106853 ↗
16. Application of decentralized fuzzy inference method for the inverse geometry design of radiative enclosures10.1016/j.infrared.2020.103287 ↗
17. Inverse determination of heat source distribution in conductive–radiative media with irregular geometry10.1016/j.jqsrt.2004.08.031 ↗
18. Geometric optimization of a radiation–conduction heating device using meshless method10.1016/j.ijthermalsci.2011.05.009 ↗
19. Geometric optimization of radiative enclosures through nonlinear programming10.1080/713836205 ↗
20. Adjoint-based shape optimization for radiative transfer using level-set function and volume penalization method10.1016/j.ijheatmasstransfer.2023.124158 ↗
21. Adjoint-based shape optimization for radiative transfer in porous structure for volumetric solar receiver10.1016/j.applthermaleng.2024.122899 ↗
22. A stability and spatial-resolution enhanced laser absorption spectroscopy tomographic sensor for complex combustion flame diagnosis10.1016/j.csite.2022.102662 ↗
23. The emergence of optical elastography in biomedicine10.1038/nphoton.2017.6 ↗
24. Remote sensing of atmospheric fine particulate matter (PM2.5) mass concentration near the ground from satellite observation10.1016/j.rse.2015.02.005 ↗
25. On the measurement of flame temperature and emissivity based on multispectral imaging technique10.1016/j.measurement.2022.111272 ↗
26. Estimation of emissivities in a two-dimensional irregular geometry by inverse radiation analysis using hybrid genetic algorithm10.1016/j.jqsrt.2003.08.012 ↗
27. An inverse analysis of a transient 2-D conduction–radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithm10.1016/j.jqsrt.2008.01.011 ↗
28. Multiparameter estimation in a transient conduction-radiation problem using the lattice Boltzmann method and the finite-volume method coupled with the genetic algorithms10.1080/10407780801959649 ↗
29. Inverse radiation analysis using repulsive particle swarm optimization algorithm10.1016/j.ijheatmasstransfer.2007.09.037 ↗
30. Application of multi-phase particle swarm optimization technique to inverse radiation problem10.1016/j.jqsrt.2007.07.013 ↗
31. Performance comparison of particle swarm optimization and genetic algorithm for inverse surface radiation problem10.1016/j.ijheatmasstransfer.2015.04.075 ↗
32. Application of homogenous continuous Ant Colony Optimization algorithm to inverse problem of one-dimensional coupled radiation and conduction heat transfer10.1016/j.ijheatmasstransfer.2013.07.054 ↗
33. Application of improved krill herd algorithms to inverse radiation problems10.1016/j.ijthermalsci.2015.12.009 ↗
34. Inverse boundary design of a radiative furnace with diffuse-spectral design surface10.1016/j.icheatmasstransfer.2009.07.005 ↗
35. Inverse radiation-conduction estimation of temperature-dependent emissivity using a combined method of genetic algorithm and conjugate gradient10.1007/s12206-013-1139-y ↗
36. Inverse estimation of various surface emissivity distributions using repulsive particle swarm optimization10.1016/j.ijheatmasstransfer.2017.12.103 ↗
37. Radiative intensity regulation to match energy conversion on demand in solar methane dry reforming to improve solar to fuel conversion efficiency10.1016/j.renene.2023.03.024 ↗
38. Conjugate radiation-convection-conduction simulation of volumetric solar receivers with cut-back inlets10.1016/j.solener.2018.06.006 ↗
39. Experiment and optimization study on the radial graded porous volumetric solar receiver matching non-uniform solar flux distribution10.1016/j.apenergy.2020.115343 ↗
40. Emissivity at high temperature of Ni-based superalloys for the design of solar receivers for future tower power plants10.1016/j.solmat.2021.111066 ↗
41. Emissivity and absorption function measurements of Al2O3 and SiC particles at elevated temperature for the utilization in concentrated solar receivers10.1016/j.solener.2020.06.079 ↗
42. Coatings for concentrating solar systems - a review10.1016/j.rser.2015.01.015 ↗
43. Effect of the optical properties of the coating of a concentrated solar power central receiver on its thermal efficiency10.1016/j.solmat.2016.08.031 ↗
44. Effects of surface optical and radiative properties on the thermal performance of a solar cavity receiver10.1016/j.solener.2018.06.075 ↗
45. Performance analysis of a volumetric receiver composed of packed shaped particles with spectrally dependent emissivity10.1016/j.ijheatmasstransfer.2018.02.006 ↗
46. Experimental and numerical performance analyses of Dish-Stirling cavity receivers: radiative property study and design10.1016/j.energy.2018.12.033 ↗
47. Improving the performance of volumetric solar receivers with a spectrally selective gradual structure and swirling characteristics10.1016/j.energy.2019.01.166 ↗
48. Pore-scale evaluation on a volumetric solar receiver with different optical property control strategies10.1016/j.energy.2023.128006 ↗
49. Conjugate radiation-convection-conduction simulation of cubic lattice solar receiver with high porosity for high-temperature heat absorption10.1299/jtst.22-00057 ↗
50. Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver10.1016/j.energy.2017.08.062 ↗
51. A new framework for design and validation of complex heat transfer surfaces based on adjoint optimization and rapid prototyping technologies10.1299/jtst.2020jtst0016 ↗
52. Multi-objective topology optimization of heat transfer surface using level-set method and adaptive mesh refinement in OpenFOAM10.1016/j.ijheatmasstransfer.2023.125099 ↗
53. Chen · 2024
54. Pan · 2024
55. Consistent coupled optical and thermal analysis of volumetric solar receivers with honeycomb absorbers10.1016/j.renene.2019.07.082 ↗
56. Application of wear-resistant coatings by plasma-spraying on the surface of parts of a complex shape
57. Nature-inspired interfacial engineering for energy harvesting10.1038/s44287-024-00029-6 ↗