Improve solar cell performance of high-performance multicrystalline silicon seeded with low-cost compact nucleation layer
Source abstract
Abstract
Abstract In order to further improve the quality of high efficiency multicrystalline silicon and the performance of multicrystalline silicon solar cells, we designed a compact nucleation layer on the crucible bottom for casting high performance multicrystalline silicon ingots. The morphology of nucleation grains, the minority carrier lifetime mappings and the defects were analyzed and compared with that of the conventional nucleation layer. The results show that the initial nucleation grains of the compact nucleation layer were finer and more uniform, and there are fewer grains with high defect density at the ingot bottom,which is beneficial to reduce the defect ratio of the whole ingot. Moreover, the solar cell efficiency and electrical performance parameters, such as Rsh was also discussed. It was found that the Rsh has a great impact on the efficiency of multi-busbars solar cells, and the average solar cell conversion efficiency of the wafers grown with the compact nucleation layer is 0.11% higher than that of the wafers grown with the conventional nucleation layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. ITRPV Working Group · 2020
2. Growth of structure-controlled polycrystalline silicon ingots for solar cells by casting10.1016/j.actamat.2006.03.014 ↗
3. High-quality multi-crystalline silicon growth for solar cells by grain-controlled directional solidification10.1002/pip.964 ↗
4. Grain control using spot cooling in multi-crystalline silicon crystal growth10.1016/j.jcrysgro.2008.10.064 ↗
5. Growth of multicrystalline silicon ingot with both enhanced quality and yield through quartz seeded method10.1016/j.jcrysgro.2015.11.020 ↗
6. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
7. The emergence of high-performance multi-crystalline silicon in photovoltaics10.1016/j.jcrysgro.2016.10.072 ↗
8. Multicrystalline silicon crystal assisted by silicon flakes as seeds10.1016/j.solmat.2017.09.004 ↗
9. Influence of different seed materials on multi-crystalline silicon ingot properties10.1016/j.jcrysgro.2015.10.024 ↗
10. Multicrystalline silicon assisted by polycrystalline silicon slabs as seeds10.1016/j.solmat.2017.12.026 ↗
11. Influence of temperature gradient at interface on defect multiplication in seed-assisted multicrystalline silicon10.1016/j.solmat.2020.110520 ↗
12. Classification of shunting mechanisms incrystalline silicon solar cells10.1016/S0927-0248(01)00191-X ↗
13. Influence of local shunting on the electrical performance in industrial Silicon solar cells10.1016/j.solener.2016.10.020 ↗
14. Influence of base resistivity on solar cell parameters of double-side contacted rear junction solar cells10.1016/j.egypro.2012.07.028 ↗