Optimization and integration of room temperature RF sputtered ICO as TCO layers in high-performance SHJ solar cells
Source abstract
Abstract
In this work, we optimize cerium-doped indium oxide – ICO – thin films with respect to sputtering parameters such as oxygen flow, deposition pressure, applied RF power. Optimized 35-nm-thick ICO layer demonstrated a mobility of 44.22 cm 2 /Vs, a carrier concentration of 1.65 × 10 20 /cm 3 , and a resistivity of 8.56 × 10 −4 Ω cm. Application of such layers into front/back contact silicon heterojunction (FBC-SHJ) solar cells enhanced the short-circuit current density ( J SC ) by 0.67 when compared to SHJ cell endowed with tin-doped indium oxide (ITO), respectively. This enhancement yielded an absolute power conversion efficiency (PCE) improvement of 0.55 %, reaching efficiencies of around 23.6 % for devices with ICO layers. • ICO films have been deposited by RF magnetron sputtering at room temperature. •Higher mobility and lower absorption are observed when compared to baseline ITO. •J sc boost of 0.67 mA/cm 2 for ICO observed. •0.55 % absolute PCE increase with ICO showcased. •With ∼23.6 % PCE, ICO demonstrated to be a promising TCO.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Silicon heterojunction back contact solar cells by laser patterning10.1038/s41586-024-08110-8 ↗
2. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
3. In2O3‐based transparent conducting oxide films with high electron mobility fabricated at low process temperatures
4. Towards bifacial silicon heterojunction solar cells with reduced TCO use10.1002/pip.3550 ↗
5. ITO-free silicon heterojunction solar cells with ZnO:Al/SiO2 front electrodes reaching a conversion efficiency of 23%10.1109/JPHOTOV.2018.2873307 ↗
6. 85% indium reduction for high-efficiency silicon heterojunction solar cells with aluminum-doped zinc oxide contacts10.1016/j.solmat.2022.112120 ↗
7. Reduction in indium usage for silicon heterojunction solar cells in a short-term industrial perspective10.1002/solr.202200598 ↗
8. Al-doped ZnO transparent conducting oxide with appealing electro-optical properties–Realization of indium free transparent conductors from sputtering targets with varying dopant concentrations
9. Improved electrical contact properties in Indium-free silicon heterojunction solar cells with amorphous SnO2 TCO layers10.1016/j.solmat.2024.113191 ↗
10. Status and perspectives of transparent conductive oxide films for silicon heterojunction solar cells10.1016/j.mtnano.2023.100329 ↗
11. Effect of residual water vapor on the performance of indium tin oxide film and silicon heterojunction solar cell10.1016/j.solener.2020.04.086 ↗
12. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
13. Effect of humidity on optical and electrical properties of Zr-doped In2O3 and a new structure for transparent electrode of silicon heterojunction solar cell10.1016/j.solener.2019.12.017 ↗
14. Transparent electrodes for efficient optoelectronics10.1002/aelm.201600529 ↗
15. Comparative study on IWO and ICO transparent conductive oxide films prepared by reactive plasma deposition for copper electroplated silicon heterojunction solar cell10.1007/s10854-021-07689-2 ↗
16. Over 130 cm2/Vs Hall mobility of flexible transparent conductive In2O3 films by excimer-laser solid-phase crystallization10.1038/s41427-022-00421-4 ↗
17. Surface scattering effect on the electrical mobility of ultrathin Ce doped In2O3 film prepared at low temperature10.1016/j.matlet.2018.04.102 ↗
18. Source material design for realizing >50% indium-saving transparent electrode toward sustainable development of silicon heterojunction solar cells10.1021/acsami.4c15684 ↗
19. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
20. Industrial TCOs for SHJ solar cells: approaches for optimizing performance and cost
21. The sputter deposition of broadband transparent and highly conductive cerium and hydrogen co-doped indium oxide and its transfer to silicon heterojunction solar cells10.1002/pip.3388 ↗
22. Cerium-doped indium oxide transparent electrode for semi-transparent perovskite and perovskite/silicon tandem solar cells10.1016/j.solener.2019.12.040 ↗
23. Optimization of silicon heterojunction interface passivation on p- and n-type wafers using optical emission spectroscopy10.1002/pssa.202100511 ↗
24. Room-temperature sputtered tungsten-doped indium oxide for improved current in silicon heterojunction solar cells10.1016/j.solmat.2021.111082 ↗
25. Influence of the deposition pressure on the properties of transparent and conductive ZnO:Ga thin-film produced by r.f. sputtering at room temperature10.1016/S0040-6090(02)01184-7 ↗
26. Surface versus bulk electronic/defect structures of transparent conducting oxides: I. Indium oxide and ITO10.1088/0022-3727/39/18/006 ↗
27. Effects of film thickness and sputtering power on properties of ITO thin films deposited by RF magnetron sputtering without oxygen10.1007/s10854-016-5223-9 ↗
28. Strategies for realizing high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2023.112413 ↗