journal article·2025-06Open access

Epi-grown broadband reflector for InAs-based thermophotovoltaics

Gavin P. Forcade, Mathieu de Lafontaine, Mathieu Giroux, Man Chun Tam, Zbig Wasilewski, Jacob J. Krich, Raphael St-Gelais, Karin Hinzer

Abstract

Reflecting sub-bandgap photons is crucial for maximizing the efficiency of thermophotovoltaic devices. However, existing metal-deposited reflectors rely on back-side metallization, which cannot be grown epitaxially, necessitating additional processing steps. In this study, we fabricate InAs-based thermophotovoltaic devices featuring a straightforward, epitaxially grown sub-bandgap reflector composed of a single layer of n-doped InAs at a doping concentration of 2.4 × 10 19 cm −3 . This high doping produces long-wavelength metallic-like reflection, and our devices demonstrate high sub-bandgap reflectivity from 3.5 to 17 μm, achieving up to 93 % reflectivity compared to 30–40 % for designs without the reflector. Using a calibrated optical model, we predict that the sub-bandgap reflectivity of this layer enhances spectral efficiency from 38 % to 79 % under a 600 K normally incident blackbody spectrum. This improvement rivals that of a standard gold back reflector, which achieves a spectral efficiency of 94 %. Additionally, our predictive electrical model, calibrated with fabricated devices, indicates that the reflective layer does not adversely affect the electrical properties of the thermophotovoltaic devices. This sub-bandgap reflector can be integrated into existing InAs-based thermophotovoltaic fabrication processes, eliminating complex substrate removal steps required for traditional gold reflectors. • Demonstrated sub-bandgap reflectivity of up to 93 % for devices with a n-InAs reflective layer. • The reflective layer can improve spectral efficiency from 38 % to 79 %, under a 600 K normally incident blackbody spectrum. • Measurement and simulation results reveal that the reflective layer does not adversely affect the electrical properties of the devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Atmospheric Ozone and Climate

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Estimating the global waste heat potential10.1016/j.rser.2015.12.192 ↗
2. Thermoelectrics versus thermophotovoltaics: two approaches to convert heat fluxes into electricity10.1088/1361-6463/ab1833 ↗
3. Efficiency-optimized near-field thermophotovoltaics using InAs and InAsSbP10.1063/5.0116806 ↗
4. Thermodynamic analysis of thermophotovoltaic efficiency and power density tradeoffs10.1063/1.1344580 ↗
5. Low bandgap InAs-based thermophotovoltaic cells for heat-electricity conversion10.1007/s11664-016-4373-0 ↗
6. High-performance near-field thermophotovoltaics for waste heat recovery10.1016/j.nanoen.2017.09.054 ↗
7. InAs thermophotovoltaic cells with high quantum efficiency for waste heat recovery applications below 1000 °C10.1016/j.solmat.2017.12.031 ↗
8. Low bandgap mid-infrared thermophotovoltaic arrays based on InAs10.1016/j.infrared.2015.09.011 ↗
9. Nanogap near-field thermophotovoltaics10.1038/s41565-018-0172-5 ↗
10. Large
11. Near-field thermophotovoltaic energy conversion: progress and opportunities10.1103/PhysRevApplied.19.037002 ↗
12. Thermophotovoltaics: fundamentals, challenges and prospects10.1016/j.apenergy.2015.08.064 ↗
13. Near-perfect photon utilization in an air-bridge thermophotovoltaic cell10.1038/s41586-020-2717-7 ↗
14. Improved performance of a near-field thermophotovoltaic device by a back gapped reflector10.1016/j.solmat.2021.111562 ↗
15. Broadband mirrors for thermophotovoltaics10.1364/OE.500790 ↗
16. Multijunction solar cells with graded buffer bragg reflectors10.1109/JPHOTOV.2018.2869550 ↗
17. Bank
18. Single-material semiconductor hyperbolic metamaterials10.1364/OE.24.008735 ↗
19. Mid-infrared designer metals10.1364/OE.20.012155 ↗
20. Infrared reflection and transmission of undoped and Si-doped InAs grown on GaAs by molecular beam epitaxy10.1088/0268-1242/8/1/017 ↗
21. Characterization of AuGe-and AuTe-based ohmic contacts on InAs n-channel high electron mobility transistors
22. Ohmic contacts to p-type InAs10.1016/j.mseb.2006.07.016 ↗
23. Citric acid etching of GaAs,_xSbx, AI0.sGa0.sSb, and InAs for heterostructure device fabrication10.1149/1.2059365 ↗
24. Giroux · 2024
25. Piprek · 2003
26. InAs light-to-heavy hole effective mass ratio determined experimentally from mobility spectrum analysis
27. Effective masses of electrons and heavy holes in GaAs, InAs, A1As and their ternary compounds10.1016/0921-4526(94)00921-H ↗
28. Dark current mechanisms investigation of surface passivation InAs/GaSb photodiodes at low temperatures10.1016/j.jallcom.2015.01.137 ↗
29. Picosecond carrier dynamics and studies of Auger recombination processes in indium arsenide at room temperature10.1103/PhysRevB.46.13194 ↗
30. The Auger recombination coefficient in InAs and GaSb derived from the infrared dynamical plasma reflectivity10.1088/0953-8984/14/13/321 ↗