Corrosion behavior of Ni-based alloys in NaCl-KCl-MgCl2 molten salts based on cellular automata simulation
Source abstract
Abstract
Chloride molten salts is considered as a promising heat storage material in next generation solar thermal power generation systems . However, their corrosive effects on alloys cannot be overlooked. In this paper, a 2D cellular automata (CA) corrosion model based on the corrosion mechanisms of Ni-based alloys in NaCl-KCl-MgCl₂ molten salt is established, and the simulated evolution rules of the corrosion process are defined. Based on the model, the corrosion extent, the evolution of the internal structure, and the distribution of Cr elements are revealed and compared with experimental values. The effects of key parameters on corrosion rate are also investigated. The results show that corrosion rate is positively correlated with the concentrations of Cl 2 and O 2 , and negatively correlated with the concentrations of Mg(OH)Cl, Cr and the main reaction probability P r12 . Orthogonal experiment results show that the influence order of parameters on corrosion rate in turn is the concentrations of Cl 2 , Mg(OH)Cl, O 2 , Cr, and P r12 . When the parameter takes the optimal value, the corrosion rate is 1.532 × 10 3 μm/y, which is reduced by up to 17.7 % compared with the original conditions. This approach is applicable to studying the corrosion behavior of Ni-based alloys in NaCl-KCl-MgCl 2 molten salts, and provides significant insights into the corrosion mechanisms of alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Solar thermal energy technologies and its applications for process heating and power generation – a review
2. Challenges and perspectives for solar fuel production from water/carbon dioxide with thermochemical cycles
3. Roles of thermal energy storage technology for carbon neutrality
4. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
5. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
6. Optical-thermal-stress analysis of a multiscale solar receiver for ultra-high-temperature concentrating solar power10.1016/j.jclepro.2023.139791 ↗
7. Investigation on thermal performance of quaternary nitrate-nitrite mixed salt and solar salt under thermal shock condition10.1016/j.renene.2021.05.002 ↗
8. Heat transfer in a molten salt filled enclosure absorbing concentrated solar radiation10.1016/j.ijheatmasstransfer.2017.04.028 ↗
9. A numerical simulation of heat transfer in an enclosure with a nonlinear heat source10.1080/10407782.2017.1330093 ↗
10. CombiCSP: a python routine for dynamic modeling of concentrating solar power plants
11. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
12. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
13. Basic properties of eutectic chloride salts NaCl-KCl-ZnCl2 and NaCl-KCl-MgCl2 as HTFs and thermal storage media measured using simultaneous DSC-TGA10.1016/j.solener.2018.01.067 ↗
14. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
15. Corrosion behavior of metallic alloys in molten chloride salts for thermal energy storage in concentrated solar power plants: a review10.1007/s11705-018-1720-0 ↗
16. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
17. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
18. Thermodynamic and kinetic corrosion behavior of alloys in molten MgCl2–NaCl eutectic: FPMD simulations and electrochemical technologies
19. Thermal gradient mass transport corrosion in NaCl-MgCl2 and MgCl2-NaCl-KCl molten salts
20. Corrosion behavior of nickel-based superalloys in thermal storage medium of molten eutectic NaCl-MgCl2 in atmosphere10.1016/j.solmat.2017.02.020 ↗
21. Excellent corrosion resistance of 316 stainless steel in purified NaCl-MgCl2 eutectic salt at high temperature10.1016/j.corsci.2020.108473 ↗
22. Cellular automata simulation on the corrosion behavior of Ni-base alloy in chloride molten salt
23. Experimental study and 3D cellular automata simulation of corrosion pits on Q345 steel surface under salt-spray environment10.1016/j.corsci.2019.03.011 ↗
24. Corrosion behaviour of various model alloys with NaCl–KCl coating10.1016/j.matchemphys.2005.03.015 ↗
25. Meyers · 2009
26. Enhanced corrosion resistance of alloy in molten chloride salts by adding nanoparticles for thermal energy storage applications10.1016/j.est.2023.107172 ↗