Research on single layer quasi-ordered air vortex inside flat plate solar collectors
Source abstract
Abstract
As one of the basic components in the low-temperature heat utilization of solar energy, flat plate solar collectors are also the leading products in the world solar energy market. Due to their simple manufacturing process, high reliability, and easy integration with buildings, they have received attentions. This article studied the heat dissipation problem caused by air flow inside the flat plate solar collector cavity, and the air forms the single layer quasi-ordered vortex. Which is similar structures and same sizes between two cold sources, and among cold source and boundary, the vortex near the cold source occupy two-thirds of position and near the boundary occupy one-third. The losses efficiency of 6.6–18.3 % caused by convection is about five times than thermal conductivity, which can improve 15%-thermal efficiency under the condition of forming thermal conductivity. The research results provide a theoretical basis for the optimization technologies such as honeycomb structures and insulation films in air cavity. It also indicates that the heat transfer method is changed from convection to conduction by optimizing the structure of the air cavity to obstruct vortex motion, which will become a strategy to improve thermal efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer Mechanisms · Solar Thermal and Photovoltaic Systems · Nanofluid Flow and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Performance enhancement analysis of the flat plate collectors: a comprehensive review10.1016/j.rser.2018.11.014 ↗
2. Performance studies of novel all-glass heat pipe evacuated collector tube integrating numerical simulation and experiment method10.1016/j.solener.2023.02.028 ↗
3. Optimizing research on flat-plate solar collector based on field synergy theory10.1016/j.egyr.2024.08.018 ↗
4. Energetic and exergetic evaluation of flat plate solar collectors10.1016/j.renene.2012.10.031 ↗
5. Simulation study on the efficiency of thermochromic absorber coatings for solar thermal flat-plate collectors10.1016/j.solener.2019.06.064 ↗
6. A comparative analysis of opto-thermal figures of merit for high temperature solar thermal absorber coatings10.1016/j.rser.2021.111818 ↗
7. Application of PEG-Fe3O4 nanofluid in flat-plate solar collector: an experimental investigation10.1016/j.solmat.2023.112566 ↗
8. A facile, green fabrication of aqueous nanofluids containing hydrophilic functionalized carbon nanotubes toward improving heat transfer in a closed horizontal flow passage10.1016/j.powtec.2022.117451 ↗
9. Energy, exergy and economic (3E) analysis of flat-plate solar collector using novel environmental friendly nanofluid10.1038/s41598-023-27491-w ↗
10. Experimental evaluation and numerical verification of enhanced heat transportation by using ultrasonic assisted nanofluids in a closed horizontal circular passage10.1016/j.csite.2021.101026 ↗
11. Heat transfer enhancement due to acoustic fields: a methodological analysis
12. Heat collection performance analysis of corrugated flat plate collector: an experimental study10.1016/j.renene.2021.09.001 ↗
13. Topology optimization in cooling moving heat sources for enhanced precision of machine tool feed drive systems10.1016/j.ijthermalsci.2024.109065 ↗
14. Investigation of a novel space heating scheme based on evacuated flat-plate solar collector and virtual energy storage10.1016/j.applthermaleng.2022.119672 ↗
15. Performance investigation of flat plate solar collector with nanoparticle enhanced integrated thermal energy storage system10.1016/j.est.2022.105681 ↗
16. Performance augmentation and machine learning-based modeling of wavy corrugated solar air collector embedded with thermal energy storage: support vector machine combined with Monte Carlo simulation10.1016/j.est.2023.109533 ↗
17. Recent progress in phase change materials storage containers: geometries, design considerations and heat transfer improvement methods10.1016/j.est.2020.101341 ↗
18. Performance evaluation of a solar air heater with staggered/longitudinal finned absorber plate integrated with aluminium sponge porous medium
19. Improvement of thermal performance of the finned plate solar air heater by using latent heat thermal storage10.1016/j.applthermaleng.2017.05.126 ↗
20. Leak-proof reversible thermochromic microcapsule phase change materials with high latent thermal storage for thermal management10.1021/acsaem.4c01282 ↗
21. Influence of the air gap layer thickness on heat transfer between the glass cover and the absorber of a solar collector
22. Free convection and shading due to gap spacing between an absorber plate and the cover glazing in solar energy flat-plate collectors10.1016/0306-2619(80)90054-9 ↗
23. Experimental testing of a solar thermal collector with composited TIM of plastic honeycomb and silica aerogel polyurethane containers
24. A new high-performance flat plate solar collector. Numerical modelling and experimental validation10.1016/j.apenergy.2023.122221 ↗
25. Detailed modeling of flat plate solar collector with vacuum glazing10.1155/2017/1587592 ↗
26. An improved vibration technique for enhancing temperature uniformity and heat transfer in viscous fluid flow10.1016/j.ces.2014.11.029 ↗
27. Straight-through all-glass evacuated tube solar collector for low and medium temperature applications10.1016/j.solener.2020.03.069 ↗
28. Study on optical and thermal performance of a linear Fresnel solar reflector using molten salt as HTF with MCRT and FVM methods10.1016/j.apenergy.2015.01.135 ↗
29. A review on applications and techniques of improving the performance of heat pipe-solar collector systems10.1016/j.solener.2022.03.022 ↗
30. Thermal performance of a nanofluid-based flat plate solar collector: a transient numerical study10.1016/j.applthermaleng.2017.10.166 ↗
31. Effect of flow rate on thermal performance of flat plate solar energy collector
32. A coupled numerical model for tube-on-sheet flat-plate solar liquid collectors. Analysis and validation of the heat transfer mechanisms10.1016/j.apenergy.2014.11.069 ↗
33. Wendelin · 2013
34. Numerical simulation for structural parameters of flat-plate solar collector10.1016/j.solener.2015.04.027 ↗
35. Experimental study of heat transfer enhancement in a flat-plate solar water collector with wire-coil inserts10.1016/j.applthermaleng.2013.07.048 ↗
36. Selective coatings on flat-plate solar collectors
37. Estimation of turbulent natural convection in horizontal parallel plates by the Q criterion10.1016/j.icheatmasstransfer.2013.04.001 ↗
38. High Prandtl number effect on Rayleigh–Bénard convection heat transfer at high Rayleigh number10.1007/s00231-016-1849-7 ↗
39. Flow periodicity and convection modes in rotating Rayleigh–Bénard convection at low Rayleigh numbers10.1007/s12046-018-1002-z ↗