journal article·2025-04Open access

Lannea kerstingii seed oil for sustainable thermal energy storage: Thermophysical properties, medium-temperature stability and interaction with common engineering metals

Mahamadou Maiga, Kokouvi Edem N’Tsoukpoe

Abstract

In the quest to enhance sustainability of energy processes, vegetable oils like Lannea kerstingii seed oil (LaKSO) offer renewable and environmentally friendly alternatives to conventional thermal oils in medium-temperature applications such as concentrating solar power (CSP). This study aims to evaluate the thermophysical properties of LaKSO and assesses its compatibility with common engineering metals to determine its suitability as a heat transfer fluid and thermal energy storage material up to 210 °C. Thermophysical properties, including specific heat capacity , density, viscosity , thermal conductivity , flash point, and melting point, were measured for fresh oil and oil aged at 210 °C for 500 and 1000 h (according to ASTM D6743 ), both in the presence and absence of metals. A series of characterizations, including thermogravimetric analysis and Fourier transform infrared spectroscopy , provided insights into the thermal stability of the oil. LaKSO exhibited a high flash point of 220 ± 10 °C and maintained good thermal stability after 1000 h of aging at 210 °C. While viscosity increased at 40 °C, it remained comparable to that of fresh LaKSO at 100 °C. However, oil saturation resulted in an increased melting point with aging. LaKSO demonstrated compatibility with stainless steel and aluminum ; however, copper and galvanized steel accelerated oxidation , indicating their unsuitability for medium-temperature applications. The thermophysical properties of LaKSO were comparable to those of previously investigated vegetable oils proposed for similar applications. Overall, LaKSO shows promising potential as a sustainable heat transfer fluid and thermal energy storage material suitable for use in CSP applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Biodiesel Production and Applications · Thermochemical Biomass Conversion Processes · Phase Equilibria and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Jatropha curcas crude oil as heat transfer fluid or thermal energy storage material for concentrating solar power plants10.1016/j.esd.2017.07.003 ↗
2. Hoffmann · 2015
3. Thermal stability of a vegetable oil-based thermal fluid at high temperature10.1080/20421338.2020.1732080 ↗
4. Review of vegetable oils behaviour at high temperature for solar plants: stability, properties and current applications10.1016/j.solmat.2019.109956 ↗
5. Thermo-physical properties and thermal energy storage performance of two vegetable oils10.1016/j.est.2023.106774 ↗
6. Degradation of viscosity of vegetable oils employed for thermal energy storage due to oxidation in ambient temperature10.1016/j.est.2023.108816 ↗
7. Use of vegetable oils as transformer oils – a review10.1016/j.rser.2015.07.032 ↗
8. Experimental investigations on insulating liquids for power transformers: mineral, ester, and silicone oils10.1109/MEI.2009.5313705 ↗
9. Temperature dependence of thermophysical and rheological properties of seven vegetable oils in view of their use as heat transfer fluids in concentrated solar plants10.1016/j.solmat.2017.12.037 ↗
10. Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants10.1016/j.triboint.2018.10.025 ↗
11. Investigation of thermal conductivity and rheological properties of vegetable oil based hybrid nanofluids containing Cu–Zn hybrid nanoparticles10.1080/08916152.2016.1233147 ↗
12. Mechanisms and factors for edible oil oxidation10.1111/j.1541-4337.2006.00009.x ↗
13. Chemistry of deep-fat frying oils10.1111/j.1750-3841.2007.00352.x ↗
14. Thermoxidative and hydrolytic changes in sunflower oil used in fryings with a fast turnover of fresh oil10.1007/BF02632144 ↗
15. The effect of process time and temperature on the accumulation of polar compounds in cottonseed oil during deep-fat frying10.1002/jsfa.1314 ↗
16. Experimental study of Lannea microcarpa seed oil as a heat transfer fluid or thermal energy storage material for medium-temperature applications10.1016/j.egyr.2024.10.001 ↗
17. Integrated design and construction of a micro-central tower power plant10.1016/j.esd.2015.11.004 ↗
18. Potential of unconventional seed oils and fats from west african trees: a review of fatty acid composition and perspectives10.1002/lipd.12305 ↗
19. Potentials for promoting oil products identified from traditional knowledge of native trees in Burkina Faso
20. Chemical composition, physicochemical characteristics, and nutritional value of Lannea kerstingii seeds and seed oil
21. Demonstration of pilot scale large aperture parabolic trough organic rankine cycle solar thermal power plant in Louisiana10.4236/jpee.2013.17006 ↗
22. Experimental performance of a field of parabolic trough collectors for small-scale power generation
23. Small hybrid solar power system10.1016/S0360-5442(03)00127-0 ↗
24. Performance and design optimization of a low-cost solar organic Rankine cycle for remote power generation10.1016/j.solener.2011.02.010 ↗
25. Commissioning and tests of a mini CSP plant10.1063/1.5067184 ↗
26. Small scale concentrating solar plants for rural electrification10.1016/j.rser.2018.03.036 ↗
27. Ashcroft
28. 2016
29. Mathieu · 2012
30. Development of small scale concentrated solar power plant using organic rankine cycle for isolated region in Indonesia10.1016/j.egypro.2013.05.016 ↗
31. Solar cogeneration with parabolic trough collectors in TRESERT, presented at the SolarPACES Conference 2012, Marrakech
32. A critical review on corrosion of compression ignition (CI) engine parts by biodiesel and biodiesel blends and its inhibition10.1016/j.rser.2012.02.042 ↗
33. High temperature corrosion in various grades of vegetable and waste oils used for bio-fuel production10.1016/j.corsci.2022.110501 ↗
34. Compatibility of metals and elastomers in biodiesel- A review
35. Corrosion behavior of carbon steel, stainless steel, aluminum and copper upon exposure to biodiesel blended with petrodiesel10.1016/j.energy.2021.120344 ↗
36. Gomna · 2020
37. Heat transfer fluid life time analysis of diphenyl oxide/biphenyl grades for concentrated solar power plants10.1016/j.egypro.2015.03.077 ↗
38. Assessment and perspectives of heat transfer fluids for CSP applications10.3390/en14227486 ↗
39. Armijo · 2016
40. Thermal energy storage systems for a global sustainable growth: current status and future trends
41. Solar thermal receivers
42. Swagelok Company. Swagelok VCR® metal gasket face seal fitting, 2024. https://products.swagelok.com/en/all-products/fittings/vcr-metal-gasket-face-seal-fittings/c/110?clp=true. (Accessed 21 May 2024).
43. Subnanogram determination of mercury by two-stage gold amalgamation and gas phase detection applied to atmospheric analysis10.1021/ac50047a030 ↗
44. Hossner
45. Terpene degradation and extraction from basil and oregano leaves using subcritical water10.1016/j.chroma.2006.11.037 ↗
46. Oxidative stability of fat substitutes and vegetable oils by the oxidative stability index method10.1007/BF02541558 ↗
47. Combined thermal analysis of plant oils10.1007/s10973-020-10470-y ↗
48. Vegetable oils: possible new plasticizers in the rubber industry
49. Biernat · 2015
50. Fourier transform infrared (FTIR) spectroscopy for analysis of extra virgin olive oil adulterated with palm oil10.1016/j.foodres.2009.12.006 ↗
51. Rapid discrimination and determination of polyunsaturated fatty acid composition in marine oils by FTIR spectroscopy and multivariate data analysis10.1007/s11947-013-1251-0 ↗
52. Characterization of edible oils and lard by fourier transform infrared spectroscopy. Relationships between composition and frequency of concrete bands in the fingerprint region10.1007/s11746-997-0058-4 ↗
53. Physicochemical and thermal characteristics of Australian chia seed oil10.1016/j.foodchem.2017.02.021 ↗
54. Characterization of rapeseed oil using FTIR-ATR spectroscopy
55. Belwet, Le Jatropha, 2024. https://www.belwet.org/le-jatropha/. (Accessed 30 July 2024).
56. Radco Industries, XCELTHERM® 600 - premium thermal oil - engineering properties, 2024. https://www.radcoind.com/fluid/xceltherm-600/. (Accessed 26 July 2024).
57. UnoClean, Radco XCELTHERM hot oil liquid phase heat transfer fluid, 2024. https://www.unoclean.com/Radco-XCELTHERM-600-Heat-Transfer-Fluid.aspx. (Accessed 30 July 2024).
58. The Dow Chemical Company. DOWTHERMTM A Heat Transfer Fluid, 2024. https://www.dow.com/en-us/pdp.dowtherm-a-heat-transfer-fluid.238000z.html (accessed January 30, 2024).
59. Thermal Fluids Hub, Dowtherm A, Synthetic organic heat transfer fluid 55 gallon drum, 2024. https://www.thermalfluidshub.com/product/dowtherm-a-heat-transfer-fluid/. (Accessed 30 July 2024).
60. Temperature dependence of density, viscosity, thermal conductivity and heat capacity of vegetable oils for their use as biofuel in internal combustion engines10.4236/aces.2019.91004 ↗
61. Characteristics, composition and oxidative stability of Lannea microcarpa seed and seed oil10.3390/molecules19022684 ↗
62. Technico-economic comparison of heat transfer fluids or thermal energy storage materials: a case study using Jatropha curcas oil10.1080/20421338.2020.1838082 ↗
63. Impact of storage conditions on the physicochemical characteristics of baobab (Adansonia digitata L.) seed oil
64. 3 - vegetable oils and their derivatives
65. Intermediate temperature fluids for heat pipes and loop heat pipes
66. Intermediate temperature fluids life tests - experiments
67. Compatibility and reliability of heat pipe materials
68. Dongshang stainless, Stainless Steel Density, 2024. https://www.dsstainlesssteel.com/stainless-steel-density/. (Accessed 21 September 2024).
69. The World Material, Density of metals, all common metal density chart & table PDF, (2024). https://www.theworldmaterial.com/density-of-metals/. (Accessed 13 February 2024).