journal article·2024-08

Experimental and numerical analysis of multi-layer micro channel applied to parabolic solar concentrator

Jenan Dakheel Hamdi, Jalal M. Jalil, Ahmed Hameed Reja

Publisher page

Abstract

There are numerous applications for micro-channel technology, but it has just a few applications in solar collectors. Therefore this research makes a clear contribution in this field by using a new design absorber in the concentrator, and the reflector was designed to focus the solar radiation on two sides. The solar concentrator system was attached to the tracking system to maintain the parabolic collector`s perpendicularity to sun rays. This study investigates the experimental and numerical effects of the micro-channel technique on solar concentrator performance for different velocity values to meet the need for temperature differences, which gives Reynolds numbers varying from 1011 to 3273. The absorber plate was made from aluminum metal with 44 rectangular microchannels (0.3 m in length, 0.02 m in width, and 0.0009 m in height). The result indicated that the two-axis tracking system would increase output temperature by roughly 18 %. Outlet air temperature decreased significantly by 13.9 °C with changing flow rate from 0.009339 to 0.030235 kg/s. The highest efficiency was 91 % in March, 89 % in November, 80 % in February, 69.8 % in December and 65.5 % in January. A good agreement was obtained between numerical and experimental with a maximum deviation of 1.4, 1.7, 9.4 and 8.88 % for the glass cover, absorber plate, upper channel and lower channel, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Thermal performance and experimental analysis of stainless steel flat plate solar collector with full-flow channels10.1016/j.heliyon.2024.e28255 ↗
2. Applicability study of the potting material based thermal management strategy for permanent magnet synchronous motors10.1016/j.applthermaleng.2018.12.141 ↗
3. A case study on the effect of inclination angle on performance of photovoltaic solar thermal collector in forced fluid mode
4. Use of solar chimney in renewable energy applications–A review
5. Optimization of heat transfer in an enclosure with a trombe wall and solar chimney
6. A brief review on solar flat plate collector by incorporating the effect of nanofluid10.1016/j.matpr.2019.11.294 ↗
7. Integrating novel microchannel-based solar collectors with a water-to-water heat pump for cold-climate domestic hot water supply, including related solar systems comparisons
8. Numerical and experimental study of cooling in desktop computer with block heat sink10.30684/etj.36.4A.10 ↗
9. In parabolic trough solar collector with optical errors Thermal and fluid dynamic analysis of a flat manifold
10. "Numerical and experimental study of CPU cooling with finned heat sink and different P . C
11. Concentration performance of solar collector integrated compound parabolic concentrator and flat microchannel tube with tracking system10.1016/j.renene.2022.09.107 ↗
12. Enhancement of the cooling capability of a high concentration photovoltaic system using microchannels with forward triangular ribs on sidewalls10.1016/j.apenergy.2018.05.052 ↗
13. Heat transfer and flow characteristics of microchannels with solid and porous ribs10.1016/j.applthermaleng.2020.115639 ↗
14. Numerical study of different micro-channel structures on fluid flow and heat transfer performance10.1088/1742-6596/2441/1/012015 ↗
15. Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling10.1016/j.applthermaleng.2015.08.105 ↗
16. Effect of micro-channel technique on solar collector performance10.1088/1757-899X/518/3/032047 ↗
17. Heat removal capacity of laminar coolant flow in a microchannel heat sink with different pin fins10.1016/j.ijheatmasstransfer.2017.05.106 ↗
18. Heat transfer augmentation in a microchannel heat sink with sinusoidal cavities and rectangular ribs10.1016/j.ijheatmasstransfer.2017.01.046 ↗
19. Laminar flow and heat transfer characteristics of interrupted microchannel heat sink with ribs in the transverse microchambers10.1016/j.ijthermalsci.2016.06.029 ↗
20. Experimental and numerical study to enhance of heat transfer coefficient in air flow using microchannel
21. Characteristics of laminar flow and heat transfer in a microchannel heat sink with triangular cavities and rectangular ribs10.1016/j.ijheatmasstransfer.2016.03.022 ↗
22. Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids10.1016/j.icheatmasstransfer.2012.10.013 ↗
23. Investigation of thermal performance of microchannel heat sink with triangular ribs in the transverse microchambers10.1016/j.icheatmasstransfer.2015.04.011 ↗
24. Flow optimization in a microchannel with vortex generators using genetic algorithm
25. Performance evaluation of dual-axis tracking system of parabolic trough solar collector
26. Single Axis solar tracker for maximizing power production and sunlight overlapping removal on the sensors of tracker10.31763/ijrcs.v1i2.333 ↗
27. Design and implementation of vehicle-mounted dual-Axis solar tracking system
28. On the study of autonomous underwater vehicles by computational fluid-dynamics
29. Heat transfer and flow characteristics of microchannels with solid and porous ribs10.1016/j.applthermaleng.2020.115639 ↗
30. Design of solar parabolic trough collector
31. Performance simulation of solar trough concentrators: optical and thermal comparisons10.3390/en16041673 ↗
32. Kumar · 2016 · vol. 5
33. Experimental study of two different types of solar dish characteristics and its efficiency based on tikrit, Iraq weather conditions
34. Modeling and technical analysis of solar tracking system to find optimal angle for maximum power generation using MOPSO algorithm
35. Theoretical prediction of solar heat flux intensity on parabolic trough collector systems
36. Nagamaniprabu · 2016 · 15953
37. Experimental and numerical investigation of solar air collector with phase change material in column obstruction
38. Determining the effect of inlet flow conditions on the thermal efficiency of a flat plate solar collector10.3390/fluids3030067 ↗
39. Investigation on heat transfer enhancement in microchannel using Al2O3/water nanofluids10.1155/2021/6680627 ↗
40. The effect of mass flow rate on the thermal performance for solar collector with compound parabolic concentrator during the summer season10.1088/1757-899X/765/1/012028 ↗