journal article·2024-07Open access

Exceptional high-temperature in-air stable solar absorber coatings based on aluminium titanium oxynitride nanocomposites

R. Escobar-Galindo, I. Heras, E. Guillén, F. Lungwitz, G. Rincón-Llorente, F. Munnik, I. Azkona, M. Krause

Abstract

The in-air stability of a novel solar absorber coating type based on aluminium titanium oxynitride nanocomposites deposited by Physical Vapour Deposition (PVD) is studied up to temperatures of 800 °C. The microstructural and morphological characterization by high resolution electron microscopy and glancing angle X-ray diffraction reveals the creation of a nanocomposite structure formed by crystalline AlTiN nanoparticles inserted in an oxide matrix. This nanocomposite structure (nc-AlTiON) is responsible for the high absorption within the whole solar wavelength range (0.3–2.5 μm) that the absorber exhibits. The as-deposited absorber has a solar absorptance, α, of 92 % and room temperature emissivity, εRT, of 70 %. The deposition of an antireflecting Al2O3 top layer lowers the reflectance of the sample in the UV–Vis–NIR region and, consequently the solar absorptance increases up to 93.5 %. Post-deposition thermal treatments of 2 h at 800 °C further improve the solar absorptance and emissivity of the absorber (α = 96 %, εRT = 60 %). Thus, this nc-AlTiON/Al2O3 coating presents solar performances that match, within the experimental errors, the ones calculated for the commercial absorber paint Pyromark® at C = 1000 (typical of central tower receivers) or even surpass it for concentration factors typical of parabolic trough receivers (C = 100) under the same operating temperatures. Very importantly, the studied nc-AlTiON/Al2O3 solar absorber coating shows no degradation after 1000 h of thermal cycling in air between 300 and 700 °C. Therefore, the developed coating shows the best thermal in-air long-term stability up to 700 °C reported so far for PVD-based solar absorbers under cycling conditions, and it can be considered as a promising absorber candidate for Generation 3 (GEN3) CSP plants.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. W. Hamilton, J. Martinek, J. Cox, A. Newman. Integrating Concentrating Solar Power Technologies into the Hybrid Optimization and Performance Platform (HOPP). Golden, CO: National Renewable Energy Laboratory. NREL/TP-5700-82726. https://www.nrel.gov/docs/fy22osti/82726.pdf.
2. Escobar Galindo · 2021
3. Levelized cost of energy (LCOE) metric to characterize solar absorber coatings for the CSP industry10.1016/j.renene.2015.06.059 ↗
4. Advances in central receivers for concentrating solar applications10.1016/j.solener.2017.03.048 ↗
5. Influence of application parameters on stability of Pyromark® 2500 receiver coatings
6. Schiel · 1987
7. Radosevich
8. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
9. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications
10. Improving durability of silicone-based paint coatings used in solar power plants by controlling consolidation procedures10.1016/j.solener.2020.02.049 ↗
11. High-temperature performance of high-efficiency, multi-layer solar selective coatings for tower applications10.1016/j.egypro.2015.03.046 ↗
12. Project High-Temperature Solar Selective Coating Development for Power Tower Receivers, [Online], Available at: https://www.energy.gov/eere/solar/project-profile-high-temperature-solar-selective-coating-development-power-tower.
13. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
14. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
15. Characterization of tribological behaviour and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures10.1016/j.triboint.2014.08.016 ↗
16. Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region10.1016/j.apsusc.2019.143651 ↗
17. Extremely high temperature stable nanometric scale multilayer spectrally selective absorber coating: emissivity measurements at elevated temperatures and a comprehensive study on ageing mechanism10.1016/j.solmat.2020.110905 ↗
18. WAlSiN-based solar-selective coating stability-study under heating and cooling cycles in vacuum up to 800 ◦C using in situ Rutherford backscattering spectrometry and spectroscopic ellipsometry10.1016/j.solmat.2023.112305 ↗
19. TiAlN∕TiAlON∕Si3N4 tandem absorber for high-temperature solar selective applications10.1063/1.2387897 ↗
20. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermalpower applications10.1016/j.solmat.2014.07.037 ↗
21. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 1: advanced microstructural and optical simulation10.1016/j.solmat.2017.10.015 ↗
22. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 2: experimental validation and durability tests at high temperature10.1016/j.solmat.2018.04.027 ↗
23. A study of solar thermal absorber stack based on CrAlSiNx/CrAlSiNxOy structure by ion beams10.1016/j.nimb.2018.04.024 ↗
24. High-temperature solar-selective coatings based on Cr(Al)N. Part 2: design, spectral properties and thermal stability of multilayer stacks10.1016/j.solmat.2020.110812 ↗
25. Synthesis and characterization of multilayered CrAlN/Al2O3 tandem coating using HiPIMS for solar selective applications at high temperature10.1021/acsaem.3c02310 ↗
26. High-entropy alloy nitride AlMo0.5NbTa0.5TiZrNx-based high-temperature solar absorber coating: structure, optical properties, and thermal stability
27. Correlation between anionic substitution and structural properties in AlCr(OxN1−x) coatings deposited by lateral rotating cathode arc PVD10.1016/j.tsf.2011.08.075 ↗
28. Structural effects of energy input during growth of Ti1−xAlxN (0.55≤x≤0.66) coatings by cathodic arc evaporation10.1016/j.surfcoat.2013.12.018 ↗
29. Simulated annealing analysis of Rutherford backscattering data10.1063/1.119524 ↗
30. 2008
31. Duffie · 2005
32. Standard · 2011
33. Accelerated life testing of solar energy materials: case study of some selective solar absorber coating materials for DHW systems. A report of Task X
34. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
35. The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.06.056 ↗
36. In air durability study of solar selective coating for parabolic trough technology
37. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
38. Durability of solar energy materials10.1016/S0960-1481(01)00046-5 ↗
39. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
40. Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP10.1016/j.solmat.2022.111625 ↗
41. Transparent conductive tantalum doped tin oxide as selectively solar-transmitting coating for high temperature solar thermal applications10.1016/j.solmat.2019.03.012 ↗
42. Morphology, microstructure evolution and optical properties of Al-Si-N nanocomposite coatings10.1016/j.surfcoat.2014.08.053 ↗
43. Structure and mechanical properties of arc evaporated Ti–Al–O–N thin films10.1016/j.surfcoat.2006.12.006 ↗
44. Infrared lattice vibrations and dielectric dispersion in corundum10.1103/PhysRev.132.1474 ↗
45. Spinel Cu–Mn–Cr oxide nanoparticle-pigmented solar selective coatings maintaining >94% efficiency at 750 °C10.1021/acsami.2c07469 ↗