journal article·2025-10Open access

Rheological study on xylitol crystallization for its use as phase change material: analytical and statistical analysis

Miguel Navarro, Zeus Gracia, Jesús Asín, Ana Lázaro, Marta Martí, Mónica Delgado

Abstract

In a global context in which decarbonization of society is wanted through the use of renewable sources, energy storage plays a fundamental role. Among the different forms of energy storage that exists, this work focuses on latent heat energy storage (LHTES) for medium-low temperatures, between 70 °C and 120 °C. Xylitol, a sugar-alcohol, is a promising phase change material (PCM) due to its low cost, low corrosivity, high latent heat (240 J/g) and a melting temperature of 92 °C. However, its use as PCM is hindered by a high degree of supercooling and a low crystallization rate. To address these challenges, this work used a seeding and shearing technique to trigger crystallization. Rheological experiments were performed to monitor viscosity changes during crystallization, in order to study the crystallization induction time. The systematic analysis included the effects of temperature (70–90 °C), shear rate(1-100s −1 ), and seed crystal size (300–400 μm and 600–700 μm). Key results show that temperature is the most dominant factor. The shortest induction time at 70 °C was found at 10s, increasing to 1500s at 90 °C. Increasing seed size and reducing the rheometer gap also shortened induction times, while shear rate had minimal influence, likely due to non-uniform shear during the test. For practical applications, operating at 80 °C is recommended to balance induction time and energy loss due to supercooling. Optimizing shear-triggered mechanism, such as stirred tanks designs, can improve crystallization controllability. • Xylitol crystallization is activated by the combined technique of seeding and shearing. • Temperature is a critical factor on crystallization velocity in xylitol. • Classical nucleation theory can show insights into factor influence. • Cumulative distribution function is a suitable approach to model crystallization.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Freezing and Crystallization Processes · Phase Change Materials Research · Thermodynamic properties of mixtures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
2. Experimental and in silico characterization of xylitol as seasonal heat storage material10.1016/j.fluid.2016.12.020 ↗
3. Thermal endurance of xylitol as a phase change material for thermal energy storage applications10.1016/j.est.2022.105717 ↗
4. Triggering and acceleration of xylitol crystallization by seeding and shearing: rheo-optical and rheological investigation10.1016/j.solmat.2020.110840 ↗
5. Xylitol: a review on bioproduction, application, health benefits, and related safety issues10.1080/10408398.2012.702288 ↗
6. Integrated renewable production of sorbitol and xylitol from switchgrass10.1021/acs.iecr.1c00397 ↗
7. Scaling up xylitol bioproduction: challenges to achieve a profitable bioprocess10.1016/j.rser.2021.111789 ↗
8. Crystalline xylitol
9. Bubble agitation as a new low-intrusive method to crystallize glass-forming materials10.1016/j.egypro.2017.11.220 ↗
10. Xylitol used as phase change material: nucleation mechanisms of the supercooling rupture by stirring10.1016/j.est.2021.103922 ↗
11. Comparative study on bubbling and shearing techniques for the crystallization of xylitol in TES systems10.1016/j.rineng.2023.100909 ↗
12. The effect of additives on the speed of the crystallization front of xylitol with various degrees of supercooling10.1016/j.expthermflusci.2009.11.005 ↗
13. Feasibility study of D-mannitol as phase change material for thermal storage
14. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature latent heat storage. (Ⅰ): non-isothermal melting and crystallization behaviors10.1016/j.energy.2018.07.081 ↗
15. A mechanism for non-Newtonian flow in suspensions of rigid spheres
16. Crystal population balance formulation and solution methods: a review10.1021/acs.cgd.7b00645 ↗
17. A statistical understanding of nucleation10.1016/S0022-0248(98)00830-6 ↗
18. Stochasticity in primary nucleation: measuring and modeling detection times10.1021/acs.cgd.6b01781 ↗
19. Modelling the stochastic behaviour of primary nucleation10.1039/C4FD00255E ↗
20. Modeling of viscosity for power plant ash slurry at higher concentrations: effect of solids volume fraction, particle size and hydrodynamic interactions10.1016/j.powtec.2009.07.005 ↗
21. Experimental study of the viscosity of suspensions: effect of solid fraction, particle size and suspending liquid10.1016/j.powtec.2014.05.044 ↗
22. Measuring induction times and crystal nucleation rates10.1039/C4FD00230J ↗
23. Selective review of offline change point detection methods10.1016/j.sigpro.2019.107299 ↗
24. Kinetics of ice crystallization in sugar solutions and fruit juices
25. 2019 · 3
26. Kashchiev · 2000
27. 2001 · 6 · 201
28. Supersaturation and nucleation
29. Crystal nucleation rates from probability distributions of induction times10.1021/cg101213q ↗