Novel highly performing tandem selective solar absorber for industrial heat applications
Source abstract
Abstract
The needed decarbonisation of the industrial sector for an efficient transition to a Net Zero future, alongside the lack of commercially competitive solar absorbers for industrial heat applications using small non-evacuated receiver tubes, has motivated the design of a new highly stable material suitable for the open-air conditions. This work demonstrates that the potential candidate is the CuCoMnO x/SiO 2 tandem selective absorber, designed to coat line-focussed receiver tubes to supply thermal energy up to 450 °C for industrial process heat applications. Remarkably, with only two layers deposited on stainless-steel (SS) under optimised conditions, the material exhibits excellent optical performance, achieving a α s > 0.95 and a ε 350°C = 0.16. The absorber design prioritises cost-effective industrialisation by optimising thermal treatment to lower both temperature and duration time, while fine-tuning layer thicknesses to locate optical interferences at the required wavelengths. This approach ensures outstanding reproducibility, uniformity, and efficiency, marking the first successful deposition of coatings on tubular forms. The coatings composing the absorber are characterised optically, by X-ray diffraction, scanning electron microscope, and thermogravimetric and differential scanning calorimeter techniques. In terms of durability, the absorber shows extraordinary resilience, maintaining thermal stability for 27 months at 400–450 °C in open air, and exhibiting good resistance to condensation (PC = 0.03 in the most drastic situation). Therefore, the SS-substrate/CuCoMnO x/SiO 2 absorber emerges as a promising commercial material for both evacuated and non-evacuated receiver tubes, promoting the integration of concentrating solar power (CSP) technology with solar heat for industrial processes (SHIP).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. A new design of multi-tube receiver for Fresnel technology to increase the thermal performance10.1016/j.applthermaleng.2021.117970 ↗
2. Status of concentrated solar power plants installed worldwide: past and present data10.3390/cleantechnol6010018 ↗
3. Hénault · 2023 · 95
4. Developing optical and thermal models with experimental validation of parabolic trough collector for moroccan industrial heat applications10.1016/j.solmat.2023.112676 ↗
5. A potential solution in reducing the parabolic trough based solar industrial process heat system cost by partially replacing absorbers coatings with non-selective ones in initial loop sections10.1016/j.apenergy.2022.120472 ↗
6. Proposal of a microchannel receiver for Fresnel technology to supply solar heat for industrial processes10.1016/j.csite.2023.103559 ↗
7. Towards CSP technology modeling in power system expansion planning10.1016/j.apenergy.2024.123211 ↗
8. Optimized design of a Linear Fresnel reflector for solar process heat applications10.1016/j.renene.2018.08.018 ↗
9. Bartali · 2020 · 1
10. Concentrated solar heat for the decarbonization of industrial chemical processes: a case study on crude oil distillation10.1016/j.energy.2024.130718 ↗
11. Global advancement of solar thermal energy technologies for industrial process heat and its future prospects: a review10.1016/j.enconman.2019.05.081 ↗
12. Recent progress in the use of renewable energy sources to power water desalination plants10.1016/j.desal.2017.11.018 ↗
13. A synergistic evaluation on application of solar-thermal energy in water purification: current scenario and future prospects10.1016/j.enconman.2018.10.090 ↗
14. Tunable thermal management based on solar heating and radiative cooling10.1016/j.solmat.2021.111457 ↗
15. A study on thermal characteristic and sleeping comfort of a hybrid solar heating system applied in cold rural areas10.1016/j.enbuild.2018.10.027 ↗
16. Preliminary analysis of a parabolic trough concentrating solar power system integrated with radiative cooling10.1093/ijlct/ctae050 ↗
17. Highly reflective multilayer solar reflectors for daytime radiative cooling10.1016/j.solmat.2023.112463 ↗
18. Performance comparison of CSP system with different heat transfer and storage fluids at multi-time scales by means of system advisor model10.1016/j.solmat.2024.112765 ↗
19. Overview of solar technologies for electricity, heating and cooling production10.1016/j.rser.2018.03.112 ↗
20. Accelerated aging of absorber coatings for CSP receivers under real high solar flux – evolution of their optical properties10.1016/j.solmat.2018.12.030 ↗
21. Selective properties of high-temperature stable spinel absorber coatings for concentrated solar thermal application10.1016/j.solener.2020.02.048 ↗
22. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
23. Enhancing the optical and thermal efficiency of a parabolic trough collector – a review10.1016/j.apenergy.2018.11.048 ↗
24. 2024
25. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol–gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
26. Thermal oxidation of stainless steel substrate with tunable spectral selectivity: transition from a reflecting to a highly absorbing Cr–Fe spinel surface10.1016/j.solmat.2021.111381 ↗
27. Scalable-manufactured metal–insulator–metal based selective solar absorbers with excellent high-temperature insensitivity10.1016/j.apenergy.2020.116055 ↗
28. A thermal efficiency-enhancing strategy of parabolic trough collector systems by cascadingly applying multiple solar selective-absorbing coatings10.1016/j.apenergy.2021.118508 ↗
29. Levelized cost of energy (LCOE) metric to characterize solar absorber coatings for the CSP industry10.1016/j.renene.2015.06.059 ↗
30. Spinel Cu–Mn–Cr oxide nanoparticle-pigmented solar selective coatings maintaining >94% efficiency at 750 °C10.1021/acsami.2c07469 ↗
31. Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP10.1016/j.solmat.2022.111625 ↗
32. High performance selective solar absorber stable in air for high temperature applications10.1016/j.solmat.2024.112849 ↗
33. Cobalt-rich spinel oxide-based wide angular spectral selective absorber coatings for solar thermal conversion applications10.1016/j.renene.2022.12.072 ↗
34. Spectrally selective absorption coatings and their applications: a review
35. Formation, structure, and optical properties of copper chromite thin films for high-temperature solar absorbers10.1016/j.mtla.2021.101156 ↗
36. Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
37. Nickel doped cobaltite spinel as a solar selective absorber coating for efficient photothermal conversion with a low thermal radiative loss at high operating temperatures10.1016/j.solmat.2019.109917 ↗
38. Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications10.1016/j.solmat.2018.01.031 ↗
39. Zirconia nanoparticles embedded spinel selective absorber coating for high performance in open atmospheric condition10.1016/j.solmat.2017.09.032 ↗
40. Structural and optical properties of CuMnCoOx spinel thin films prepared by a citric acid-based sol–gel dip coating route for solar absorber applications10.1007/s10971-015-3630-7 ↗
41. Improving the optical properties of CuCoMnOx spinel absorber using ZnO nanorod arrays for thermal collector and photocatalytic applications10.1016/j.ceramint.2023.12.233 ↗
42. Solar selective coatings with multilayered structure based on thermal spraying WC-Co solar absorption layer10.1016/j.vacuum.2018.01.046 ↗
43. J.A.A. M.C. Gardey Merino, G.E. Lascalea and P. Vazquez, Synthesis of CoCuMnOx pigments for solar collectors absorbent enamels, Acad. J. Sci. Res., 4 316-326, doi: 10.15413/ajsr.2016.0604.
44. Sol–gel derived CuCoMnOx spinel coatings for solar absorbers: structural and optical properties10.1016/S0927-0248(01)00024-1 ↗
45. Incorporation of spherical shaped CuO@SiO2 light microtraps into CuCoMnOx spinels to enhance solar absorbance10.1111/jace.16851 ↗
46. Effect of different carbon allotropes on optical properties of CoCuMnOx solar selective coating10.1016/j.jestch.2021.101086 ↗
47. Rahmani · 2024
48. Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: a review10.1016/j.rser.2014.04.062 ↗
49. Handbook of sol-gel science and technology
50. A selective solar absorber for unconcentrated solar thermal panels10.3390/en14040900 ↗
51. Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane10.1016/j.solmat.2009.05.023 ↗
52. 2003
53. 2011
54. 2018
55. 2003
56. 2014 · vols. 22975–3
57. Optical and structural analysis of sol–gel derived Cu–Co–Mn–Si oxides for black selective solar nanocomposite multilayered coatings10.1016/j.solmat.2015.06.058 ↗
58. Effect of calcination temperature on the structure, crystallinity, and photocatalytic activity of core-shell SiO2@TiO2 and mesoporous hollow TiO2 composites10.3390/coatings13050852 ↗
59. Effect of heat-treatment on the thermal and mechanical stability of Ni/Al2O3 nanocrystalline coatings10.3390/jmmp4010017 ↗
60. Influence of substrate and sintering temperature on the thickness and number of layers of 3YSZ multilayer sol-gel coatings10.1016/j.ceramint.2020.04.028 ↗
61. Effects of fundamental processing parameters on the durability of sol-gel-derived silica thin films in water10.2109/jcersj2.119.434 ↗
62. Densification of hybrid silica–titania sol–gel films studied by ellipsometry and FTIR10.1016/S0921-5107(00)00442-6 ↗
63. Effect of deposition conditions on phase content and mechanical properties of yttria-stabilized zirconia thin films deposited by sol-gel/dip-coating10.1155/2021/4449890 ↗
64. Bockmeyer · 2007
65. Sol-gel derived CuCoMnOx spinel coatings for solar absorbers: Structural and optical properties10.1016/S0927-0248(01)00024-1 ↗
66. Interspecimen comparison of the refractive index of fused silica10.1364/JOSA.55.001205 ↗
67. Spectrally selective absorber coating from transition metal complex for efficient photothermal conversion10.1007/s10853-013-7639-4 ↗
68. Optimization design of CuCrxMn2−xO4-based paint coatings used for solar selective applications10.1016/j.solmat.2012.06.033 ↗
69. Cu(Mn0.748Ni0.252)2O4/SiO2 nanoparticle layers for wide-angle spectral selectivity and high thermal stability10.1021/acsanm.0c01363 ↗
70. Sol–gel combustion‐derived CoCuMnOx spinels as pigment for spectrally selective paints10.1111/j.1551-2916.2010.04182.x ↗
71. Effect of additives on the durability and properties of antireflective films for solar glass covers
72. Free-standing, roll-able, and transparent silicone polymer film prepared by using nanoparticles as cross-linking agents10.1016/j.apt.2012.11.011 ↗
73. Low-density TEOS-based silica aerogels prepared at ambient pressure using isopropanol as the preparative solvent10.1016/j.jallcom.2009.08.055 ↗
74. Preparation and characterization of hydrophobic silica aerogel sphere products by co-precursor method10.1016/j.solidstatesciences.2015.08.005 ↗
75. Sol-gel synthesis of methyl-modified mesoporous materials with dual porosity10.1016/j.jnoncrysol.2005.01.053 ↗
76. Vicente · 2002
77. Densification of In2O3:Sn multilayered films elaborated by the dip-coating sol–gel route10.1016/S0040-6090(03)01061-7 ↗