journal article·2024-12Open access

Characterization of rear-side potential-induced degradation in bifacial p-PERC solar modules

Solhee Lee, Jiyeon Nam, Dongjin Choi, Hongjun Jang, Yerin Lee, Ji Woo Sohn, Kuen Kee Hong, Donghwan Kim, Yoonmook Kang, Soohyun Bae, Hae-Seok Lee

Abstract

Bifacial solar modules are increasingly preferred over monofacial modules to maximize the solar power output within a limited space. Owing to their high efficiency and compatibility with existing production lines, bifacial p-type passivated emitter and rear contact (p-PERC) solar modules have dominated the market since their commercialization. This study analyzes the influence of Al 2 O 3 , a passivation layer of p-PERC solar cells, on the PID and its underlying mechanism. Experiments were conducted on bifacial p-PERC module samples to analyze their electrical properties. Additionally, cell-like samples were fabricated to measure characteristics, for example, carrier lifetime, that are difficult to assess in full modules. To accelerate module degradation, experiments were conducted at 85 °C and 85 % humidity, while a voltage of −1000 V was applied to investigate the PID phenomenon. The results reveal degradation at the rear of the module caused by polarization effects, which were confirmed through changes in solar cell parameters and recombination current. The proposed mechanism indicates that the degradation in bifacial p-PERC solar modules is caused by the field-effect deterioration of the Al₂O₃ layer caused by alkali ions diffusing from the glass. This is observed through changes in the carrier concentration within Si and the detection of alkali ions within Al 2 O 3 . Our analysis considers both module and cell structure samples to delineate the influence of Al 2 O 3 on the PID, which has not been previously reported. This study enhances the understanding of the polarization effect in bifacial p-PERC solar cells, thus contributing to the advancement of solar cell passivation strategies. • Potential-induced degradation (PID) of bifacial p-PERC solar cells is investigated. • Experiments were conducted to elucidate the PID mechanism. • The results improve the understanding of PID and resulting changes in lifetime. • A method based on Al 2 O 3 diffusion to detect degradation in the cells is proposed. • The study can assist in developing effective solar cell passivation strategies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bifacial solar photovoltaics – a technology review10.1016/j.rser.2016.03.041 ↗
2. A review of crystalline silicon bifacial photovoltaic performance characterisation and simulation10.1039/C8EE02184H ↗
3. A comprehensive review and outlook of bifacial photovoltaic (bPV) technology10.1016/j.enconman.2020.113283 ↗
4. 50 Per cent more output power from an albedo-collecting flat panel using bifacial solar cells10.1016/0038-092X(82)90078-0 ↗
5. International Technology Roadmap for Photovoltaic (ITRPV) 2024 Results, (in).
6. Strategy, development and mass production of high-efficiency crystalline Si PV modules
7. Model based continuous improvement of industrial p-type PERC technology beyond 21% efficiency10.1016/j.egypro.2015.07.073 ↗
8. Review of potential‐induced degradation in bifacial photovoltaic modules10.1002/ente.202200943 ↗
9. Microstructural analysis of crystal defects leading to potential-induced degradation (PID) of Si solar cells10.1016/j.egypro.2013.05.042 ↗
10. The role of stacking faults for the formation of shunts during potential‐induced degradation of crystalline Si solar cells10.1002/pssr.201307090 ↗
11. Testing and analysis for lifetime prediction of crystalline silicon PV modules undergoing degradation by system voltage stress
12. Development of an IEC test for crystalline silicon modules to qualify their resistance to system voltage stress10.1002/pip.2434 ↗
13. Micro structural root cause analysis of potential induced degradation in c-Si solar cells10.1016/j.egypro.2012.07.020 ↗
14. Explanation of potential-induced degradation of the shunting type by Na decoration of stacking faults in Si solar cells10.1016/j.solmat.2013.06.015 ↗
15. On the mechanism of potential‐induced degradation in crystalline silicon solar cells10.1002/pssr.201206276 ↗
16. Search for microstructural defects as nuclei for PID-shunts in silicon solar cells
17. Potential induced degradation of solar cells and panels
18. On the discrepancy between leakage currents and potential-induced degradation of crystalline silicon modules
19. Polarization effects and tests for crystalline silicon cells
20. The surface polarization effect in high-efficiency silicon solar cells
21. Physics of potential-induced degradation in bifacial p-PERC solar cells10.1016/j.solmat.2019.109950 ↗
22. Effects of passivation configuration and emitter surface doping concentration on polarization-type potential-induced degradation in n-type crystalline-silicon photovoltaic modules10.1016/j.solmat.2021.111074 ↗
23. Effects of SiNx refractive index and SiO2 thickness on polarization‐type potential‐induced degradation in front‐emitter n‐type crystalline‐silicon photovoltaic cell modules10.1002/ese3.1135 ↗
24. Rapid progression and subsequent saturation of polarization-type potential-induced degradation of n-type front-emitter crystalline-silicon photovoltaic modules10.7567/JJAP.57.122301 ↗
25. Mechanistic understanding of polarization‐type potential‐induced degradation in crystalline‐silicon photovoltaic cell modules10.1002/aesr.202200167 ↗
26. Elucidating potential‐induced degradation in bifacial PERC silicon photovoltaic modules10.1002/pip.3028 ↗
27. Vermang · 2012
28. Native defects in Al2O3 and their impact on III-V/Al2O3 metal-oxide-semiconductor-based devices10.1063/1.3544310 ↗
29. Origin and passivation of fixed charge in atomic layer deposited aluminum oxide gate insulators on chemically treated InGaAs substrates10.1063/1.3399776 ↗
30. First-principles calculations of intrinsic defects in Al 2 O 310.1103/PhysRevB.68.085110 ↗
31. Atomic-scale characterization of perovskite superlattice using chemical lattice imaging and spatially resolved electron energy-loss spectroscopy10.1063/1.1767279 ↗
32. A chemical bonding model for the native oxides of the III–V compound semiconductors10.1116/1.571038 ↗
33. Behavior of hydrogen in high dielectric constant oxide gate insulators10.1063/1.1609245 ↗
34. Native point defects and dangling bonds in α-Al2O310.1063/1.4784114 ↗
35. Wet chemical oxidation to improve interfacial properties of Al2O3/Si and interface analysis of Al2O3/SiOx/Si structure using surface carrier lifetime simulation and capacitance–voltage measurement10.3390/en13071803 ↗