Photodegradation of self-immolating polymers as a potential solution to particulate contamination
Source abstract
Abstract
The ubiquity of particulate contamination requires dust mitigation techniques to provide low scatter surfaces and edges on sensitive optical devices in space. Poly(olefin sulfone)s have been shown to photodegrade with the assistance of a photobase generator when exposed to UV light (254 nm) and heat (120 °C). These may be applicable in minimizing dust on optical surfaces for space applications. However, their behavior in vacuum has not been fully characterized. We synthesized poly(2-methyl-1-pentene sulfone) (PMPS) and poly(1-hexene sulfone) (PHS) with and without a photobase generator. We studied the photodegradation (172 nm or 254 nm) of thin films in vacuum. Spectroscopic ellipsometry was used to quantify film thickness over time. The PMPS and PHS films both degraded when exposed to UV light in vacuum, though PHS to a lesser degree. We found that heat was not required to cause degradation, and that degradation occurred with UV irradiation even without a photobase generator. This investigation shows that poly(olefin sulfone)s could be used to protect optical surfaces until their deployment in space.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Indoor Air Quality and Microbial Exposure · Wind and Air Flow Studies · Plant Surface Properties and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Detection of Earth-like planets around nearby stars using a petal-shaped occulter10.1038/nature04930 ↗
2. Multi-faceted metagenomic analysis of spacecraft associated surfaces reveal planetary protection relevant microbial composition10.1371/journal.pone.0282428 ↗
3. Poly(olefin sulfone)s
4. Photo-induced depolymerisation: recent advances and future challenges10.1002/cptc.201900166 ↗
5. Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generating groups in the side chain10.1021/ma702001h ↗
6. Mechanisms of thermal decompositions of polysulfones: a dft and CBS-QB3 study10.1021/ma051503y ↗
7. Photoinduced depolymerization in poly(olefin sulfone) films composed of volatile monomers doped with a photobase generator10.1002/pola.25898 ↗
8. Deep UV photolithography with composite photoresists made of poly(olefin sulfones)10.1021/bk-1984-0242.ch005 ↗
9. Analytical model for the optical functions of amorphous semiconductors from the near-infrared to ultraviolet: applications in thin film photovoltaics10.1063/1.1497462 ↗
10. Quantifying the accuracy of ellipsometer systems10.1002/pssc.200777755 ↗
11. Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation10.1063/1.367101 ↗
12. Transmissivity and absorption of fused quartz between 0.22 μ and 3.5 μ from room temperature to 1500◦C10.1364/AO.10.002263 ↗
13. Synthetic quartz with high ultraviolet transmission10.1364/AO.7.001387 ↗
14. Method for the measurement of the output of monochromatic (254 nm) low-pressure UV lamps
15. Keitz · 1971