journal article·2024-01

Ribbons lengthening induced by thermal cycling in PV modules, Part II: Glass-ribbon mechanical interaction through the encapsulant

Jean-Baptiste Charpentier, Philippe Voarino, Julien Gaume

Publisher page

Abstract

A problematic ribbon lengthening is sometime observed in PV modules exposed to thermal cycling. In the present work, this phenomenon is studied in high amplitude thermal cycling. Locally, two types of mechanical interactions are at play: the ribbon-cell interaction through the solder and the ribbon-glass one through the encapsulant. In the present work, the first is neglected. Thus, a simple system without cell is considered. A three layers model of this system is derived. Using the elastic solution, a physical lengthening mechanism is proposed. Then, using the Finite Element Method with elasto-plastic and visco-elastic behaviors, more accurate predictions are reported. They provide the main features of ribbons lengthening and its sensitivity to the problem parameters. Experiments are conducted on the simple system and a more realistic one (comprising cells). Both systems behave in a similar fashion after solder failure. Some features of the observed ribbons lengthening are well described by the model. Nonetheless, the encapsulant thickness has a substantial impact on the lengthening. This is not predicted by the model. On ribbons microscope images, there are evidences of ribbon-encapsulant interface failures in all cases. This is not taken into account in the present model and it could be the cause of the reported discrepancy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Vibration and Dynamic Analysis · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Moisture ingress in photovoltaic modules: A review10.1016/j.solener.2021.06.055 ↗
2. A review of the degradation of photovoltaic modules for life expectancy10.3390/en14144278 ↗
3. Study on mitigation method of solder corrosion for crystalline silicon photovoltaic modules10.1155/2014/809075 ↗
4. Assessing the causes of encapsulant delamination in PV modules
5. Enabling the measurement of thermomechanical stress in solar cells and PV modules by confocal micro-Raman spectroscopy10.1016/j.solmat.2019.01.028 ↗
6. Thermomechanical design rules for photovoltaic modules
7. Mechanical and thermomechanical assessment of encapsulated solar cells by finite-element-simulation
8. Numerical investigation on residual stress in photovoltaic laminates after lamination10.1007/s12206-015-0125-y ↗
9. Effect of interconnect geometry on the evolution of stresses in a solar photovoltaic laminate during and after lamination10.1016/j.solmat.2018.07.026 ↗
10. Thermomechanical stress in solar cells: Contact pad modeling and reliability analysis10.1016/j.solmat.2019.03.041 ↗
11. Use of digital image correlation technique to determine thermomechanical deformations in photovoltaic laminates: Measurements and accuracy10.1016/j.solmat.2010.03.028 ↗
12. Thermal stress and strain of solar cells in photovoltaic modules
13. Thermomechanical deformations in photovoltaic laminates10.1177/0309324711421722 ↗
14. Mechanical behaviour and fatigue of copper ribbons used as solar cell interconnectors
15. M. Pander, R. Meier, M. Sander, S. Dietrich, M. Ebert, Lifetime estimation for solar cell interconnectors, in: 28th EU PVSEC, 2013.
16. Solder joint failure modes in the conventional crystalline Si module10.1016/j.egypro.2014.08.010 ↗
17. Investigations of different soldering failure modes and their impact on module reliability10.1016/j.egypro.2014.08.009 ↗
18. Evaluation of thermo-mechanical damage and fatigue life of solar cell solder interconnections10.1016/j.rcim.2016.12.008 ↗
19. Constitutive behaviour of copper ribbons used in solar cell assembly processes
20. Thermo-mechanical assessment of solar cell displacement with respect to the viscoelastic behaviour of the encapsulant
21. Influence of viscoelastic properties of encapsulation materials on the thermomechanical behavior of photovoltaic modules10.1109/JPHOTOV.2017.2762583 ↗
22. Viscoelastic material characterization and modeling of photovoltaic module packaging materials for direct finite-element method input10.1109/JPHOTOV.2020.3005086 ↗
23. A computer program to extract the continuous and discrete relaxation spectra from dynamic viscoelastic measurements
24. Root cause analysis of solar cell cracks at shingle joints10.1016/j.solmat.2022.111590 ↗