Modified porous membrane with high solar-to-thermal conversion and oil resistance performance for solar steam generation
Source abstract
Abstract
The utilization of solar steam generator via photothermal conversion is a sustainable and highly sufficient solution for addressing long-standing water scarcity. Due to its extensive optical absorption, dopamine has been considered as a promising photo-thermal conversion material. In this work, by co-depositing Fe 3+ and 3-glycidyloxypropyltrimethoxysilane (KH550) with polydopamine (PDA), a high-performance, low-cost, and scalable modified membrane (called PVDF/PDA@KH550@Fe 3+ ) with superior oil resistance was developed. Under one sun illumination, the resulting PVDF/PDA@KH550@Fe 3+ membrane generated solar steam with a high efficiency of 90.33% and a high evaporation rate of 1.40 kg m −2 h −1 . More importantly, the evaporation rate still performs well even in oil-contaminated water due to the improvement of hydrophilicity and anti-fouling capabilities of the modified membrane. In oil-in-water emulsion, the evaporation rate approaches 1.33 kg m −2 h −1 and the evaporation efficiency reaches 85.49%. This study demonstrated that solar steam generation using PVDF/PDA@KH550@Fe 3+ membrane could be a viable option for seawater and oily wastewater purification.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar-Powered Water Purification Methods · Membrane Separation Technologies · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Long-term assessment of land-use and climate change on water scarcity in an arid basin in Iran10.1016/j.ecolmodel.2022.109934 ↗
2. Water scarcity in the Yellow River Basin under future climate change and human activities10.1016/j.scitotenv.2020.141446 ↗
3. A MXene-based hierarchical design enabling highly efficient and stable solar-water desalination with good salt resistance10.1002/adfm.202007110 ↗
4. Effect of minimal pre-treatment on reverse osmosis using surface water as a source10.1016/j.desal.2021.115056 ↗
5. Energy efficiency analysis of membrane distillation for thermally regenerative salinity gradient power technologies10.1016/j.desal.2022.115694 ↗
6. Design and optimization of electrodialysis process parameters for brackish water treatment10.1016/j.jclepro.2021.128686 ↗
7. A simple, mild and versatile method for preparation of photothermal woods toward highly efficient solar steam generation10.1016/j.nanoen.2020.104650 ↗
8. Highly thermally insulated and superhydrophilic corn straw for efficient solar vapor generation10.1021/acsami.0c01585 ↗
9. Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation10.1016/j.jcis.2020.12.084 ↗
10. Low cost, robust, environmentally friendly, wood supported 3D-hierarchical Cu3SnS4 for efficient solar powered steam generation10.1016/j.jcis.2022.02.012 ↗
11. Enhanced optical absorption and solar steam generation of CB-ATO hybrid nanofluids10.1016/j.renene.2022.08.150 ↗
12. Narrow-Bandgap LaMO3 (M = Ni, Co) nanomaterials for efficient interfacial solar steam generation10.1016/j.jcis.2021.12.158 ↗
13. 3D-Printed, all-in-one evaporator for high-efficiency solar steam generation under 1 sun illumination10.1002/adma.201700981 ↗
14. Architecting a floatable, durable, and scalable steam generator: hydrophobic/hydrophilic bifunctional structure for solar evaporation enhancement10.1002/smtd.201800176 ↗
15. Enhancing solar steam generation using a highly thermally conductive evaporator support10.1016/j.scib.2021.09.018 ↗
16. More from less: improving solar steam generation by selectively removing a portion of evaporation surface10.1016/j.scib.2022.07.004 ↗
17. Breath-figure self-assembled low-cost Janus fabrics for highly efficient and stable solar desalination10.1002/adfm.202113258 ↗
18. A strategy to flexibly operate a solar aided power generation plant for wide irradiation conditions
19. A high-performing single-stage invert-structured solar water purifier through enhanced absorption and condensation10.1016/j.joule.2021.04.009 ↗
20. Solar seawater distillation by flexible and fully passive multistage membrane distillation10.1021/acs.nanolett.1c00910 ↗
21. Interfacial solar steam generation enables fast-responsive, energy-efficient, and low-cost off-grid sterilization10.1002/adma.201805159 ↗
22. Food-derived carbonaceous materials for solar desalination and thermo-electric power generation10.1016/j.nanoen.2019.104006 ↗
23. Flexible thin-film black gold membranes with ultrabroadband plasmonic nanofocusing for efficient solar vapour generation10.1038/ncomms10103 ↗
24. Broadband-absorbing WO3-x nanorod-decorated wood evaporator for highly efficient solar-driven interfacial steam generation
25. Integrated evaporator for efficient solar-driven interfacial steam generation10.1021/acs.nanolett.0c01999 ↗
26. Mussel-inspired polydopamine modification of polymeric membranes for the application of water and wastewater treatment: a review10.1016/j.cherd.2020.03.011 ↗
27. A bioinspired elastic hydrogel for solar-driven water purification10.1002/adma.202007833 ↗
28. Boosting solar steam generation by photothermal enhanced polydopamine/wood composites
29. Melamine foam/polyethylene glycol composite phase change material synergistically modified by polydopamine/MXene with enhanced solar-to-thermal conversion10.1016/j.renene.2021.02.077 ↗
30. Carbon black and polydopamine modified non-woven fabric enabling efficient solar steam generation towards seawater desalination and wastewater purification10.1016/j.seppur.2021.119621 ↗
31. Encapsulation of MXene/polydopamine in nitrogen-doped 3D carbon networks with high photothermal conversion efficiency for seawater desalination10.1016/j.jcis.2022.01.080 ↗
32. Crosslinked PVDF-membranes for solvent resistant nanofiltration10.1016/j.memsci.2018.08.051 ↗
33. Fabrication and characterization of amphiphilic PVDF copolymer ultrafiltration membrane with high anti-fouling property10.1016/j.memsci.2016.09.006 ↗
34. Spray assembly of metal-phenolic networks: formation, growth, and applications10.1021/acsami.8b13589 ↗
35. An integrated solar absorber with salt-resistant and oleophobic based on PVDF composite membrane for solar steam generation
36. Ultra- robust carbon fibers for multi- media purification via solar- evaporation10.1039/C8TA08829B ↗
37. MOF-based hierarchical structures for solar-thermal clean water production10.1002/adma.201808249 ↗
38. Surface characteristics of a self-polymerized dopamine coating deposited on hydrophobic polymer films10.1021/la202877k ↗
39. Elucidating the structure of poly(dopamine)10.1021/la204831b ↗
40. The revival of thermal utilization from the Sun: interfacial solar vapor generation10.1093/nsr/nwz030 ↗
41. Solar steam generation based on the photothermal effect: from designs to applications, and beyond10.1039/C9TA05935K ↗
42. Versatile coating with multifunctional performance for solar steam generation
43. A hollow and compressible 3D photothermal evaporator for highly efficient solar steam generation without energy loss10.1002/solr.202100053 ↗
44. Recent advances in polymer and polymer composite membranes for reverse and forward osmosis processes10.1016/j.progpolymsci.2016.03.003 ↗
45. How pore hydrophilicity influences water permeability?10.34133/2019/2581241 ↗
46. Influence of membrane hydrophilicity on water permeability: an experimental study bridging simulations10.1016/j.memsci.2020.118087 ↗
47. Membrane distillation at the water-energy nexus: limits, opportunities, and challenges10.1039/C8EE00291F ↗
48. Synergistic fouling behaviors and mechanisms of calcium ions and polyaluminum chloride associated with alginate solution in coagulation-ultrafiltration (UF) process
49. Surface assembly of catechol-functionalized poly(L-lysine)-graft-poly(ethylene glycol) copolymer on titanium exploiting combined electrostatically driven self-organization and blomimetic strong adhesion10.1021/ma9020664 ↗
50. Barnacle cement as surface anchor for "clicking" of antifouling and antimicrobial polymer brushes on stainless steel10.1021/bm400382e ↗
51. Adhesion of marine fouling organisms on hydrophilic and amphiphilic polysaccharides10.1021/la3038022 ↗
52. Graphene oxide modified polyamide nanofiltration membrane with improved flux and antifouling properties10.1039/C4TA03607G ↗
53. Surface-grafted polysarcosine as a peptoid antifouling polymer brush10.1021/la302131n ↗
54. Mussel-inspired polydopamine modification of polymeric membranes for the application of water and wastewater treatment: a review10.1016/j.cherd.2020.03.011 ↗
55. Bioinspired polydopamine deposition and silane grafting modification of bamboo fiber for improved interface compatibility of poly (lactic acid) composites10.1016/j.ijbiomac.2021.12.119 ↗
56. Mussel-inspired hybrid coatings that transform membrane hydrophobicity into high hydrophilicity and underwater superoleophobicity for oil-in-water emulsion separation10.1021/acsami.5b00894 ↗
57. Mussel-inspired tailoring of membrane wettability for harsh water treatment10.1039/C4TA05970K ↗