journal article·2009-09

Sheet resistance uniformity in drive-in step for different multi-crystalline silicon wafer dispositions

A. Moussi, D. Bouhafs, L. Mahiou, M.S. Belkaid

Publisher page

Abstract

Abstract In this work, we present a study of emitters realized using different configurations of the silicon wafers in the quartz boat. The phosphorous liquid source is sprayed onto p-type multi-crystalline silicon substrates and the drive-in is made at high temperature in a muffle furnace. Three different configurations of the wafers in the boat are tested: separated, back to back and compact block of wafers. A fourth configuration is also used in source–receptor mode. The emitter phosphorous concentration profile is obtained by SIMS analysis. The resulting emitters are characterized by sheet resistance measurements and a comparison is made between the wafers within the same batch and from one batch to another. The uniformity and the standard deviation of the sheet resistance are calculated in each case. The emitter sheet resistance mapping of the wafer set in the middle of the boat for a given process gives a mean R sq 14.66 Ω/sq with a standard deviation of 1.76% and uniformity of 18.7%. Standard deviations of 2.116% and 1.559% are obtained for wafers in the batch when using the spaced and compact configurations, respectively. The standard deviation is reduced to 0.68% when the wafers are used in source/receptor mode. A comparison is also made between wafers with different dilution of phosphorous source in ethanol. From these results we can conclude that the compact configuration offers better uniformity and lower standard deviation. Furthermore, when combined with the source-receptor configuration these parameters are significantly improved. This study allows the experimenter to identify the technological parameters of the solar cell emitter manufacturing and target precisely the desired values of the sheet resistance while limiting the number of rejected wafers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. J.J. Haase, High volume solar cell production lines production optimization, in: Proceedings of The twentieth European Photovoltaic Solar Energy Conference, 6–10 June 2005, Barcelona, Spain, pp. 855–857.
2. W.C. Sinke, C. del Cañizo, G. del Coso, 1 Euro per Watt-peak advanced crystalline silicon modules: the crystalclear integrated project, in: Proceedings of the Twenty-Third European Photovoltaic Solar Energy Conference, 1–5 September 2008 Valencia, Spain, pp. 3700–3705.
3. G. Beaucarne, J. John, P. Choulat, Y. Ma, R. Russel, I.G. Romijn, A.W. Weeber, M. Hofmann, R. Preu, A. Slaoui, N. Le Quang, O. Nichiporuk, C. del Cañizo, A. Pan, H.J. Solheim, J. Evju, H. Nagel, J. Horzel, B. Bitnar, M. Heemeier, T. Weber, B. Raabe, H. Haverkamp, C. Strümpel, J. Junge, S. Riegel, S. Seren, G. Hahn, solar cell process development in the European integrated project crystalclear, in: Proceedings of the Twenty-Third European Photovoltaic Solar Energy Conference, 1–5 September 2008 Valencia, Spain, pp. 958–962.
4. A simultaneously diffused, textured, in situ oxide AR-coated solar cell process (STAR process) for high-efficiency silicon solar cells10.1109/16.658830 ↗
5. A novel processing technology for high-efficiency silicon solar cells10.1149/1.1391735 ↗
6. G. Schubert, J. Horzel, R. Kopecek, F. Huster1, P. Fath, Silver thick film contact formation on lowly doped phosphorous emitters, in: Proceedings of the Twentieth European Photovoltaic Solar Energy Conference, 6–10 June 2005, Barcelona, Spain, pp. 934–937.
7. T. Krygowski, A. Rohatgi, D. Ruby, Simultaneous P&B diffusion, in situ surface passivation, impurity filtering and gettering for high efficiency Si solar cells, in: Proceedings of the Twenty-Sixth IEEE Photovoltaic Specialists Conference, Anaheim, USA, 1997, pp. 235–238.
8. Pressure system (Product Preview). (Brief Article) Semiconductor International, July 2002.
9. G. Goaer, N. Le Quang, C. Bourcheix, Y. Pellegrin, J.C. Lorentz, S. Martinuzzi, I. Perichaud, F. Warchol, Cost reduction in mass production of large dimension multicrystalline solar cells by introduction of LYDOP process, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, 7–11 June 2004, Paris, pp. 1025–1028.