journal article·2024-12

Atom layer deposited TiO2 electron transport layer for silicon heterojunction solar cells to achieve high performance

Jiacheng Shang, Yurong Zhou, Hui Yan, Fanying Meng, Dongming Zhao, Haiwei Huang, Zhidan Hao, Yuqin Zhou, Fengzhen Liu

Publisher page

Abstract

Silicon/compound heterojunction (SCH) solar cells based on p-type and n-type c-Si wafers using atom layer deposition-TiO 2 and low work function metal as the electron transport layer and rear electrode are fabricated. Efficiencies of 20.6 % and 21.6 % are achieved on p-type and n-type silicon solar cells, respectively. High V oc exceeding 700 mV have been realized on both kinds of Si wafers. Special attention has been paid to the SCH solar cells based on p-type c-Si wafers in which the TiO 2 electron transport layer serves as the emitter. Carrier transport mechanisms and junction characteristics of the SCH solar cells are analyzed based on dark J-V measurement. The formation of a strong inversion layer at the Si surface region is determined, which implies the high V oc potential of the SCH solar cells based on p-type Si. An optical loss analysis is performed along with a possible solution to further improve the J sc. The feasibility of TiO 2 applied as an efficient electron transport layer (emitter) in p-type SCH solar cells with high performance has been showed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. 2024
2. 21% efficient silicon heterojunction solar cells on n-and p-type wafers compared10.1109/JPHOTOV.2012.2209407 ↗
3. Flexible perovskite photovoltaic modules and solar cells based on atomic layer deposited compact layers and UV-irradiated TiO2 scaffolds on plastic substrates10.1002/aenm.201401808 ↗
4. Interfacial behavior and stability analysis of p-type crystalline silicon solar cells based on hole-selective MoOX/metal contacts10.1002/solr.201970105 ↗
5. Sol-gel-processed yttrium-doped NiO as hole transport layer in inverted perovskite solar cells for enhanced performance10.1016/j.apsusc.2018.01.236 ↗
6. Oxygen vacancies in tungsten oxide and their influence on tungsten oxide/silicon heterojunction10.1016/j.solmat.2016.05.042 ↗
7. Superior performance of V2O5 as hole selective contact over other transition metal oxides in silicon heterojunction10.1016/j.solmat.2017.04.042 ↗
8. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
9. Solution-Processed Nb:SnO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsami.6b13362 ↗
10. Dopant-free all-back-contact Si nanohole solar cells using MoOx and LiF films10.1021/acs.nanolett.5b03955 ↗
11. Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra-thin MoOx hole collector layer via tailoring (i) a-Si: H/MoOx interface10.1002/pip.3638 ↗
12. Industrially feasible, dopant-free, carrier-selective contacts for high-efficiency silicon solar cells10.1002/pip.2901 ↗
13. Ultrathin titanium dioxide nanolayers by atomic layer deposition for surface passivation of crystalline silicon10.1109/JPHOTOV.2016.2545404 ↗
14. 21.3%-efficient n-type silicon solar cell with a full area rear TiOx/LiF/Al electron-selective contact10.1016/j.solmat.2019.110291 ↗
15. Passivation and carrier selectivity of TiO2 contacts combined with different passivation layers and electrodes for silicon solar cells
16. Investigation of MoOx/n-Si strong inversion layer interfaces via dopant-free heterocontact
17. p-type c-Si/SnO2/Mg heterojunction solar cells with an induced inversion layer10.1063/5.0070585 ↗
18. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
19. Catalysis by alkaline earth metal oxides. III. X-ray photoelectron spectroscopic study of catalytically active MgO, CaO, and BaO surfaces. B10.1246/bcsj.54.1505 ↗
20. Origin of electric dipoles formed at high-k/SiO2 interface10.1063/1.3110968 ↗
21. Bilayer MoOX/CrOX passivating contact targeting highly stable silicon heterojunction solar cells10.1021/acsami.0c09877 ↗
22. Controllability of electrical conductivity by oxygen vacancies and charge carrier trapping at interface between CoO and electrodes10.1143/JJAP.50.071101 ↗
23. XPS studies on SiOx thin films10.1016/0169-4332(93)90431-A ↗
24. Electrical transport mechanisms in a-Si: H/c-Si heterojunction solar cells10.1063/1.3267316 ↗
25. Influence of defects and band offsets on carrier transport mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells10.1016/S0927-0248(00)00222-1 ↗
26. Excellent passivation of silicon surfaces by thin films of electron-beam-processed titanium dioxide10.1109/JPHOTOV.2017.2749975 ↗
27. Electrical transport mechanisms in a-Si: H/c-Si heterojunction solar cells10.1063/1.3267316 ↗
28. Electrolyte-induced inversion layer Schottky junction solar cells10.1021/nl200811z ↗
29. Full-Area passivating hole contact in silicon solar cells enabled by a TiOx/metal bilayer10.1021/acsaem.2c02392 ↗