journal article·2024-10Open access

Extracting the parameters of two-energy-level defects in silicon wafers using machine learning models

Sijin Wang, Brendan Wright, Yan Zhu, Yoann Buratti, Ziv Hameiri

Abstract

This study introduces a pioneering machine learning (ML)-based methodology to characterise two-level defects in the bulk of silicon wafers. Bulk defects have a critical impact on the efficiency of silicon solar cells. By identifying the specific parameters of these defects, namely, their energy levels and capture cross-sections, researchers can devise strategies to mitigate their effects. It is often assumed that bulk defects are single-level defects following the Shockley-Read-Hall recombination statistics. However, two-level defects or even multi-level defects are common as well. At present, it is challenging to distinguish between single-level defects and two-level defects, and to extract the parameters of a two-level defect. This study proposes an ML-based approach to distinguish between one- and two-level defects based on temperature- and injection-dependent lifetime spectroscopy with an accuracy above 90 %. Furthermore, if the defect is identified as a two-level defect, this study presents another ML method to extract its defect parameters, with a correlation coefficient above 0.9 for the energy levels.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The transition to renewables: can PV provide an answer to the peak oil and climate change challenges10.1016/j.enpol.2010.08.014 ↗
2. Solar PV market research and industry competition report
3. Influence of high road labour policies and practices on renewable energy costs, decarbonization pathways, and labour outcomes10.1088/1748-9326/ac34ba ↗
4. Impurity-related limitations of next-generation industrial silicon solar cells10.1109/JPHOTOV.2012.2210030 ↗
5. Analysis for efficiency potential of crystalline Si solar cells
6. Understanding the strong apparent injection dependence of carrier lifetimes in doped polycrystalline silicon passivated wafers10.1002/solr.202400087 ↗
7. Reassessing Iron–Gallium recombination activity in silicon10.1063/5.0198737 ↗
8. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
9. Quasi-steady-state photoconductance, a new method for solar cell material and device characterization
10. Green · 1992
11. Improvements and gaps in the empirical expressions for the fill factor of modern industrial solar cells10.1016/j.solmat.2023.112183 ↗
12. Accurate expressions for solar cell fill factors including series and shunt resistances
13. Advances in the surface passivation of silicon solar cells10.1016/j.egypro.2012.02.004 ↗
14. Silicon solar cells with passivating contacts: classification and performance10.1002/pip.3574 ↗
15. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
16. Development and prospects of surface passivation schemes for high-efficiency c-Si solar cells10.1016/j.solener.2018.03.025 ↗
17. Nelson · 2003
18. Determining the charge states and capture mechanisms of defects in silicon through accurate recombination analyses: a review10.1016/j.solmat.2018.07.029 ↗
19. Investigation of degradation in solar cells from different mc-Si materials10.1016/j.egypro.2011.06.101 ↗
20. Recombination via point defects and their complexes in solar silicon10.1002/pssa.201200216 ↗
21. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
22. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
23. Investigation of two-level defects in injection dependent lifetime spectroscopy10.1016/j.solmat.2020.110692 ↗
24. Electron-hole recombination statistics in semiconductors through flaws with many charge conditions10.1103/PhysRev.109.1103 ↗
25. Rein · 2005
26. Zhu · 2019
27. Parameterisation of injection-dependent lifetime measurements in semiconductors in terms of Shockley-Read-Hall statistics: an application to oxide precipitates in silicon10.1063/1.4725475 ↗
28. Application of the Newton–Raphson method to lifetime spectroscopy for extraction of defect parameters10.1109/JPHOTOV.2017.2695666 ↗
29. Deep learning extraction of the temperature-dependent parameters of bulk defects10.1021/acsami.2c12162 ↗
30. Extracting bulk defect parameters in silicon wafers using machine learning models10.1038/s41524-020-00410-7 ↗
31. A machine learning approach to defect parameters extraction: using random forests to inverse the Shockley-Read-Hall equation
32. Goodfellow · 2016
33. Python machine learning: machine learning and deep learning with Python
34. Electrical characterization of the slow boron oxygen defect component in Czochralski silicon
35. On the selection of optimum Savitzky-Golay filters10.1109/TSP.2012.2225055 ↗
36. 2003