Composition engineering of antimony selenosulfide films using hydrothermal method for efficient solar cells
Source abstract
Abstract
In this work, Sb 2Se yS 3-y films were prepared by hydrothermal method at 135 °C for 135 min. The influence of the growth solution volume, the mixing S source, the selenourea concentration and the etching by the N-butyldithiocarbamic acid (BDCA) solution in DMF on the thickness, the content of Sb–O, Se, S and the Se distribution in Sb 2Se yS 3-y films and the power conversion efficiency (PCE) of solar cells was systematically investigated. When the growth solution volume was 30 mL and the chemical composition of the growth solution was 25 mM antimony potassium tartrate (KSbC 4H 4O 7·0.5H 2O), 75 mM Na 2S 2O 3, 5 mM thioacetamide, 10.5 mM selenourea, the PCE of Sb 2Se yS 3-y solar cells were 9.56 % and 9.41 ± 0.10 %. When Sb 2Se yS 3-y films were etching by BDCA for 10 min, the PCE of Sb 2Se yS 3-y solar cells were 10.13 % and 9.95 ± 0.16 %. The result revealed that the homogeneous extent of the Se distribution in Sb 2Se yS 3-y films can be improved by changing the hydrothermal process parameters and the chemical composition of the growth solution. And the etching by BDCA should be an efficient strategy for eliminating the surface defects and decreasing the gradient of the Se distribution in Sb 2Se yS 3-y films.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
2. Development of antimony sulfide-selenide Sb2(S, Se)3-based solar cells10.1016/j.jechem.2017.09.031 ↗
3. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
4. Pulsed laser deposition of antimony selenosulfide thin film for efficient solar cells10.1063/1.5139467 ↗
5. Water additive enhanced solution processing of alloy Sb2(S1-xSex)3-based solar cells10.1002/solr.201900582 ↗
6. Efficient Sb2(S,Se)3 solar cells via monitorable chemical bath deposition
7. Band gap and defect engineering for high-performance cadmium-free Sb2(S,Se)3 solar cells and modules10.1002/adfm.202209601 ↗
8. Solvent-assisted hydrothermal deposition approach for highly-efficient Sb2(S,Se)3 thin-film solar cells10.1002/aenm.202300391 ↗
9. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
10. Dual effect of NH4F additive in the hydrothermal deposition of antimony selenosulfide thin film for high-performance solar cells10.1007/s40843-022-2066-5 ↗
11. Effect of thickness and Se distribution of Sb2S3-ySey thin films to solar cell efficiency
12. 2D/3D heterojunction engineering at the buried interface towards high-performance inverted methylammonium-free perovskite solar cells10.1038/s41560-023-01295-8 ↗
13. Synergistic Modification of 2D perovskite with alternating cations in the interlayer space and multisite ligand toward high-performance inverted solar cells10.1002/adma.202303275 ↗
14. Crystallization manipulation and holistic defect passivation toward stable and efficient inverted perovskite solar cells10.1039/D3EE00413A ↗
15. High-efficiency Sb2Se3 solar cells modified by potassium hydroxide10.1021/acs.jpclett.1c03802 ↗
16. Lowest open-circuit voltage deficit achievement to attain high efficient antimony selenosulfide solar cells
17. Regulating energy band alignment via alkaline metal fluoride assisted solution post-treatment enabling Sb2(S,Se)3 solar cells with 10.7% Efficiency
18. The pyrolysis preparation of the compact and full-coverage AgSbS2 thin films and the photovoltaic performance of the corresponding solar cells10.1016/j.jmst.2021.04.070 ↗
19. Direct solution deposition of device quality Sb2S3-xSex films for high efficiency solar cells10.1016/j.solmat.2018.04.009 ↗
20. Unveiling of a puzzling dual ionic migration in lead- and iodide-deficient halide perovskites (d-HPs) and its impact on solar cell J-V curve hysteresis
21. Designing advanced S-scheme CdS QDs/La-Bi2WO6 photocatalysts for efficient degradation of RhB
22. Effect of the thickness and Sb-O content in Sb2S3 thin films to the solar cell efficiency10.1002/solr.202300622 ↗
23. Composition engineering for the content and distribution of Sb-O, Se, S in antimony sulfoselenide thin films using chemical bath deposition for efficient solar cells
24. Over 6% certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization