Intercomparison of opto-thermal spectral measurements for concentrating solar thermal receiver materials from room temperature up to 800 °C
Source abstract
Abstract
An intercomparison of opto-thermal spectral measurements has been performed for some relevant receiver materials in concentrating solar thermal applications, from room temperature up to 800°C. Five European laboratories performed spectral measurements at room temperature, while two laboratories performed infrared spectral measurements at operating temperature up to 800 °C. Relevant materials include Haynes 230 (oxidized, Pyromark 2500 and industrial black coating) and silicon carbide. Two key figures of merit were analyzed: i) solar absorptance αsol at room temperature, over the spectral range [0.3 – 2.5] μm, ii) thermal emittance εth(T), over the common spectral range [2-14] μm, derived from spectral measurements performed from room temperature up to 800 °C. Oxidized H230 reached an αsol value of 90.9±1.0%. Pyromark 2500 reached an αsol value of 96.3±0.5%, while the industrial black coating achieved an αsol value of 97.0±0.4%. Silicon carbide reached an αsol value of 93.5±1.1%. Low standard deviations in αsol indicate reproducible measurements at room temperature. For oxidized H230, the εth,calc(T) value varied from 55% at room temperature up to 81% at 800 °C. For Pyromark 2500 and the industrial black coating, εth,calc(T) fluctuated between 90% and 95%, with a weak temperature dependence. For silicon carbide, εth,calc(T) varied from 70% at room temperature up to 86% at 800 °C. The typical standard deviation among participating laboratories is about 3%. εth,meas(T) values derived from spectral measurements at operating temperature were consistent within a few percentage points in comparison to εth,calc(T) values derived from spectral measurements at room temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. International Renewable Energy Agency (IRENA), Solar energy. 2020. https://www.irena.org/Energy-Transition/Technology/Solar-energy. (Accessed 24th November 2023).
2. World Bank, Concentrating solar power: clean power on demand 24/7 (2021) 65. https://pubdocs.worldbank.org/en/849341611761898393/WorldBank-CSP-Report-Concentrating-Solar-Power-Clean-Power-on-Demand-24-7-FINAL.pdf. (Accessed 24th November 2023).
3. German Aerospace Center (DLR) Institute of Solar Research, Solar thermal powerplants: heat, electricity and fuels from concentrated solar power 27 (2021). https://www.dlr.de/sf/en/PortalData/73/Resources/dokumente/publikationen_medien/dlr_und_sf/Study_Solar_thermal_power_plants_DLR_2021-05.pdf. (Accessed 24th November 2023).
4. Review of high-temperature central receiver designs for concentrated solar power10.1016/j.rser.2013.08.099 ↗
5. Advances in central receivers for concentrating solar applications10.1016/j.solener.2017.03.048 ↗
6. Volumetric receivers in solar thermal power plants with central receiver system technology: a review10.1016/j.solener.2011.02.002 ↗
7. High solar-absorptance CSP coating characterization and reliability testing with isothermal cyclic loads for service-life prediction10.1039/C8EE03536A ↗
8. Highly efficient and durable solar thermal energy harvesting via scalable hierarchical coatings inspired by stony corals10.1039/D1EE03028K ↗
9. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
10. A comparative analysis of opto-thermal figures of merit for high temperature solar thermal absorber coatings10.1016/j.rser.2021.111818 ↗
11. A laboratory intercomparison of solar absorptance and thermal emittance measurements at room temperature10.1016/j.solmat.2022.111579 ↗
12. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
13. Round Robin Test for the comparison of spectral emittance measurement apparatuses10.1016/j.solmat.2018.11.026 ↗
14. First spectral emissivity study of a solar selective coating in the 150-600°C temperature range10.1016/j.solmat.2013.07.002 ↗
15. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
16. Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems, Solar Energy Materials and Solar Cells10.1016/j.solmat.2019.109961 ↗
17. Analysis and experimental results of solar-blind temperature measurements in solar furnaces10.1115/1.1636191 ↗
18. Solar blind pyrometry not relying on atmospheric absorption bands10.1016/j.solener.2014.04.031 ↗
19. Emissivity at high temperature of Ni-based superalloys for the design of the solar receiver for future tower power plants10.1016/j.solmat.2021.111066 ↗
20. Total hemispherical emissivity of sintered SiC up to 1850 K in high vacuum and in air at different pressures10.1016/j.jeurceramsoc.2018.03.050 ↗
21. Spectral emittance of ceramics for high temperature solar receivers10.1016/j.solener.2021.05.019 ↗
22. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications10.1063/1.4984355 ↗
23. Influence of application parameters on stability of Pyromark 2500 receiver coatings10.1063/1.5117514 ↗
24. Forty shades of black: a benchmark of high temperature sprayable black coatings applied on Haynes 23010.1063/5.0028773 ↗
25. Long-term thermal stability and failure mechanisms of Pyromark 2500 for high-temperature solar thermal receivers10.1016/j.solmat.2022.111898 ↗
26. Influence of different thermal degradation processes on the optical property of Pyromark-250010.1016/j.solener.2023.02.004 ↗
27. Development of optical tools for the characterization of selective solar absorber at elevated temperature10.1063/1.4949218 ↗
28. Infrared System Development Corporation, IR 563/301 Blackbody system. https://www.infraredsystems.com/Products/blackbody563.html. (Accessed 24th November 2023).
29. Experimental validation of a pyroreflectometric method to determine the true temperature on opaque surface without hampering reflections10.1016/j.measurement.2009.01.012 ↗
30. Ci Systems, SR-5000N spectroradiometer. https://www.ci-systems.com/SR-5000N-Spectroradiometer. (Accessed 24th November 2023).
31. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37◦ Tilted Surface · 2020 · 21
32. International Standard Organization, statistical methods for use in proficiency testing by interlaboratory comparison