journal article·2024-01

Improvement on solar selective absorption properties of anodic aluminum oxide photonic crystal films by electrodeposition of silver

Hongyang Wei, Qing Xu, Dongchu Chen, Min Chen, Menglei Chang, Xiufang Ye

Publisher page

Abstract

Solar selective absorption films based on anodic aluminum oxide (AAO) photonic crystals were prepared by an anodization under periodic current-pulses, subsequently with an alternating current electrodeposition of Co and Ag in sequence. The phase structure, microstructure, and solar selective absorption properties of the Co–Ag electrodeposited film were investigated in comparison with a Co electrodeposited counterpart. Moreover, the stability of the properties against thermal annealing was examined for the two films. A one-dimensional photonic crystal structure was verified for the AAO part in both films, with the first-order photonic bandgap occurring at around 4 μm, while the metals were confirmed to be deposited at the bottom of the AAO part in the form of nanoparticles. For the Co–Ag electrodeposited film, the Ag nanoparticles were deposited over those of Co. The Ag electrodeposition not only was contributive to the solar selective absorption properties, but also substantially improved the stability of the properties against thermal annealing. The Co–Ag electrodeposited film exhibited an infrared emissivity of 0.12, a solar absorptivity of 0.94, and a spectral selectivity of 7.83 before experiencing thermal annealing, while retained a decent spectral selectivity of 6.00 after being annealed in air at 300 °C for 24 h.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Thermal Radiation and Cooling Technologies · Photonic Crystals and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Solar energy for future world: a review10.1016/j.rser.2016.05.022 ↗
2. Role of solar energy in reducing ecological footprints: an empirical analysis10.1016/j.jclepro.2021.126028 ↗
3. The photovoltaic conversion enhancement of NiO/Tm:CeO2/SnO2 transparent p-n junction device with dual-functional Tm:CeO2 quantum dots10.1016/j.cej.2020.124802 ↗
4. Predicting wavelength-dependent photochemical reactivity and selectivity10.1038/s41467-021-21797-x ↗
5. Photothermal properties and photothermal conversion performance of nano-enhanced paraffin as a phase change thermal energy storage material10.1016/j.solmat.2020.110792 ↗
6. Highly efficient photothermal conversion of Ti3C2Tx/Ionic liquid gel pen ink for smoothly writing ultrasensitive, wide-range detecting, and flexible thermal sensors10.1021/acsami.0c13215 ↗
7. Research opportunities to advance solar energy utilization10.1126/science.aad1920 ↗
8. Polygeneration in desalination by photovoltaic thermal systems: a comprehensive review10.1016/j.rser.2020.109946 ↗
9. Review on photovoltaic/thermal hybrid solar collectors: classifications, applications and new systems10.1016/j.solener.2020.07.062 ↗
10. The spectral selective absorbing characteristics and thermal stability of SS/TiAlN/TiAlSiN/Si3N4 tandem absorber prepared by magnetron sputtering10.1016/j.solener.2014.11.005 ↗
11. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
12. Origin of solar thermal selectivity and interference effects in nickel-alumina nanostructured films10.1016/j.surfcoat.2009.12.008 ↗
13. Nanoporous anodic aluminium oxide: advances in surface engineering and emerging applications10.1016/j.pmatsci.2013.01.002 ↗
14. Capillary-driven solar-thermal water desalination using a porous selective absorber
15. The role of nanostructure morphology of nickel-infused alumina on solar-thermal energy conversion10.1088/2040-8986/abcc53 ↗
16. Non-noble metal based broadband photothermal absorbers for cost effective interfacial solar thermal conversion10.1515/nanoph-2020-0168 ↗
17. Cobalt-sputtered anodic aluminum oxide membrane for efficient photothermal CO2 hydrogenation10.1002/cnma.202100162 ↗
18. "Hot" in plasmonics: temperature-related concepts and applications of metal nanostructures
19. Design, fabrication and optical characterizations of large-area lithography-free ultrathin multilayer selective solar coatings with excellent thermal stability in air10.1016/j.solmat.2017.09.025 ↗
20. Ultra-high temperature porous graded ceramics for solar energy applications10.1016/j.jeurceramsoc.2018.01.023 ↗
21. The effects of nickel-pigmented aluminium oxide selective coating over aluminium alloy on the optical properties and thermal efficiency of the selective absorber prepared by alternate and reverse periodic plating technique10.1016/j.enconman.2009.11.047 ↗
22. Electrochemically grown cobalt-alumina composite layer for solar thermal selective absorbers10.1016/j.solmat.2014.07.041 ↗
23. Electrochemical deposition of Ni-Fe alloys into porous alumina for solar selective absorbers, Superlattice10.1016/j.spmi.2016.10.066 ↗
24. Improving solar thermal absorption of an anodic aluminum oxide-based photonic crystal with Cu-Ni composite nanoparticles10.1016/j.ceramint.2017.06.117 ↗
25. Corrosion resists Ni, Co co-pigmented nanoporous anodized alumina as spectral selective coating structure for solar thermal applications10.1016/j.jallcom.2019.151833 ↗
26. Characterization and degradation testing of nickel pigmented anodic alumina solar selective absorber films produced by alternate and reverse periodic plating technique10.1080/01425910310001634460 ↗
27. High-performance infrared thermal radiation suppression metamaterials enabling inhibited infrared emittance and decreased temperature simultaneously10.1016/j.ijheatmasstransfer.2020.120318 ↗
28. Comparison between predicted and actually observed in-service degradation of a nickel pigmented anodized aluminium absorber coating for solar DHW systems10.1016/S0927-0248(99)00112-9 ↗
29. Oxidation investigation of nickel nanoparticles10.1039/b800672e ↗
30. Graded-lattice AAO photonic crystal heterostructure for high Q refractive index sensing10.1039/C5RA15890G ↗
31. Fabrication of one-dimensional alumina photonic crystals by anodization using a modified pulse-voltage method10.1016/j.materresbull.2015.03.037 ↗
32. Tuning the optical properties of nanoporous anodic alumina photonic crystals by control of allowed voltage range via mixed acid concentration10.1016/j.jpcs.2018.01.022 ↗
33. Stacked nanoporous anodic alumina gradient-Index filters with tunable multispectral photonic stopbands as sensing platforms10.1021/acsami.8b19411 ↗
34. From gradient-index to step-index filters: a switch between the two types of photonic crystals induced by the amplitude and period of sinusoidal function applied during high-temperature anodisation of aluminium10.1016/j.apsusc.2022.155031 ↗
35. Silver loaded anodic aluminum oxide dual-bandgap heterostructure photonic crystals and their application for surface enhanced Raman scattering10.1016/j.apsusc.2020.148881 ↗
36. Selenic acid anodizing of aluminium for preparation of 1D photonic crystals10.1016/j.elecom.2019.01.027 ↗
37. Controlling the color and effective refractive index of metal-anodic aluminum oxide (AAO)-Al nanostructures: morphology of AAO10.1021/acs.jpcc.7b11131 ↗
38. The effect of the voltage waveform on the microstructure and optical properties of porous anodic alumina photonic crystals10.1016/j.optmat.2019.109488 ↗
39. Structural color coating films composed of an amorphous array of colloidal particles via electrophoretic deposition10.1038/am.2017.13 ↗
40. Thickness-dependent iridescence of one-dimensional photonic crystals based on anodic alumina10.1016/j.matdes.2018.02.012 ↗
41. Anodizing with voltage versus optical path length modulation: a new tool for the preparation of photonic structures10.1039/C8TC04246B ↗
42. Structural tailoring of nanoporous anodic alumina optical microcavities for enhanced resonant recirculation of light10.1039/C8NR04263B ↗
43. On the Precise Tuning of optical filtering features in nanoporous anodic alumina distributed bragg reflectors10.1038/s41598-018-22895-5 ↗
44. Control of high-order photonic band gaps in one-dimensional anodic alumina photonic crystals10.1016/j.optmat.2020.110317 ↗
45. Structural engineering of nanoporous anodic alumina photonic crystals by sawtooth-like pulse anodization10.1021/acsami.6b03900 ↗
46. Switchable photonic crystals using one-dimensional confined liquid crystals for photonic device application10.1021/acsami.6b15361 ↗
47. Lowered infrared emittance and enhanced thermal stability of solar selective absorption properties of anodic aluminum oxide photonic crystal coatings10.1016/j.solener.2022.06.041 ↗
48. Optical, structural and thermal characteristics of Cu–CuAl2O4 hybrids deposited in anodic aluminum oxide as selective solar absorber10.1016/j.solmat.2010.04.075 ↗
49. Controlled growth of spinel CuAl2O4/Cu hybrid nanorods array by electrodeposition in porous aluminum oxide template10.1016/j.jallcom.2012.08.008 ↗
50. Insulating plasmonic photothermal heat of Ag nanoparticles by a thin carbon shell10.1016/j.jallcom.2019.03.336 ↗
51. Plasmonic silver nanoparticle-decorated electrospun nanofiber membrane for interfacial solar vapor generation10.1177/00405175211014966 ↗
52. Ellingham diagram
53. Chapter 3.3 – Ellingham diagram
54. Electrodeposited black cobalt selective coatings for application in solar thermal collectors: fabrication, characterization, and stability10.1016/j.solener.2020.07.042 ↗
55. Easy preparation of anodic aluminum oxide photonic crystal films with tunable structural colors10.1016/j.optmat.2021.111722 ↗
56. Structural coloring of aluminum10.1016/j.elecom.2011.08.008 ↗
57. Faulkner · 2000
58. Switchable photonic crystals using one-dimensional confined liquid crystals for photonic device Application10.1021/acsami.6b15361 ↗
59. Thermodynamics of the harmonic oscillator: Wien's displacement law and the Planck spectrum10.1119/1.1566782 ↗
60. Photothermal testing before and after degradation of nickel-pigmented aluminium oxide selective absorber prepared by alternate and reverse periodic plating technique10.1016/j.enconman.2012.02.034 ↗
61. Influence of tin content on spectral selectivity and thermal conductivity of Sn-Al2O3 solar selective absorber10.1007/s40243-017-0109-1 ↗