Characterization of high-temperature figure of merit for solar-thermal absorbers
Source abstract
Abstract
The figure of merit (FOM) is a widely used metric to characterize the solar-thermal conversion performance of solar absorber layers. Many of previous works have reported FOMs estimated from the radiative properties measured at room temperature. However, advanced concentrated solar power (CSP) plants operate at very high temperatures ( ∼ 750°C), which can strongly affect the absorber’s radiative properties. The present work proposes using a 1-D conduction-based reference bar technique to directly measure the converted thermal energy to determine the FOM at high absorber temperatures ( ≳ 750 ° C ) while operating under a large solar concentration ( ∼ 1200 × suns). Using the finite difference method, we carefully analyze several key parameters influencing the design of the experimental setup, such as temperature distribution, material properties, heat loss, and sensor accuracy. In addition, a rigorous uncertainty analysis is incorporated into the FOM to ascertain the confidence level of the result. We validate this new technique on a custom-built tungsten reference bar with an oxidized Inconel 625 solar-thermal absorber. A good agreement between the model and the experiment shows the reliability of the FOM measurement with a well-defined uncertainty. The same method can be implemented to measure the high-temperature FOM of most surface or volumetric solar absorbers for CSP.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Meinel · 1976
2. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
3. Selective solarabsorbers10.1615/AnnualRevHeatTransfer.2012004119 ↗
4. Concentrated solar power plants: Review and design methodology10.1016/j.rser.2013.01.032 ↗
5. The prospect of high temperature solid state energy conversion to reduce the cost of concentrated solar power10.1039/C4EE00288A ↗
6. Thermionic energy conversion for concentrating solar power10.1016/j.apenergy.2017.09.021 ↗
7. A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: Current status and research trends10.1016/j.rser.2018.04.097 ↗
8. Comprehensive energy balance analysis of photon-enhanced thermionic power generation considering concentrated solar absorption distribution10.1016/j.solmat.2021.111067 ↗
9. Mehos · 2017
10. High-efficiency, air-stable manganese-iron oxide nanoparticle-pigmented solar selective absorber coatings toward concentrating solar power systems operating at 750∘C
11. High solar performance selective surface using bi-sublayer cermet film structures10.1016/0927-0248(92)90089-8 ↗
12. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
13. Novel Mo–Si3N4 based selective coating for high temperature concentrating solar power applications10.1016/j.solmat.2013.12.005 ↗
14. Coatings for concentrating solar systems–A review10.1016/j.rser.2015.01.015 ↗
15. Effect of the optical properties of the coating of a concentrated solar power central receiver on its thermal efficiency10.1016/j.solmat.2016.08.031 ↗
16. Spectrally selective solar absorber stable up to 900∘C for 120 h under ambient conditions10.1016/j.solener.2018.09.009 ↗
17. Effects of metal dopings on CuCr2O4 pigment for use in concentrated solar power solar selective coatings10.1021/acsaem.8b01976 ↗
18. Receiver with light-trapping nanostructured coating: A possible way to achieve high-efficiency solar thermal conversion for the next-generation concentrating solar power10.1016/j.renene.2021.12.026 ↗
19. Kennedy · 2002
20. Optimization of high temperature SiC volumetric solar absorber10.1016/j.egypro.2014.03.051 ↗
21. Numerical and experimental evaluation and optimization of ceramic foam as solar absorber–Single-layer vs multi-layer configurations10.1016/j.apenergy.2017.11.003 ↗
22. Experimental study of ceramic foams used as high temperature volumetric solar absorber10.1016/j.solener.2016.06.066 ↗
23. Experimental results of gradual porosity volumetric air receivers with wire meshes10.1016/j.renene.2018.01.073 ↗
24. The real utility ranges of the solar selective coatings10.1016/j.solmat.2007.07.006 ↗
25. Levelized cost of coating (LCOC) for selective absorber materials10.1016/j.solener.2014.05.017 ↗
26. Copper-oxide spinel absorber coatings for high-temperature concentrated solar power systems10.1016/j.solmat.2018.03.025 ↗
27. Influence of application parameters on stability of pyromark® 2500 receiver coatings
28. Scalable and ultrathin high-temperature solar selective absorbing coatings based on the high-entropy nanoceramic AlCrWTaNbTiN with high photothermal conversion efficiency10.1002/solr.202000790 ↗
29. Characterization of Pyromark 2500 for high-temperature solar receivers
30. Black oxide nanoparticles as durable solar absorbing material for high-temperature concentrating solar power system10.1016/j.solmat.2014.12.004 ↗
31. High temperature performance of high-efficiency, multi-layer solar selective coatings for tower applications10.1016/j.egypro.2015.03.046 ↗
32. Copper-alloyed spinel black oxides and tandem-structured solar absorbing layers for high-temperature concentrating solar power systems10.1016/j.solener.2016.03.007 ↗
33. High-efficiency, high-temperature, air-stable Cu, Mn and Fe oxides nanoparticles-pigmented silicone solar selective coatings via hot spray-coating method
34. Scalable-manufactured metal-insulator-metal based selective solar absorbers with excellent high-temperature insensitivity10.1016/j.apenergy.2020.116055 ↗
35. High-temperature optical and radiative properties of alumina–silica-based ceramic materials for solar thermal applications10.1016/j.solmat.2022.111710 ↗
36. Accurate design of solar selective absorber based on measured optical constants of nano-thin Cr film10.3390/coatings10100938 ↗
37. M. Winter, R. Bickel, D. Sekulic, H. Koch, B.D. Butler, H. Fu, Spectral, Directional Emittance at Elevated Temperatures for Various Materials, in: 54th AIAA Aerospace Sciences Meeting, 2016, p. 1981.10.2514/6.2016-1981 ↗
38. Temperature-dependent optical properties of titanium nitride10.1063/1.4977840 ↗
39. The temperature dependence of optical properties of tungsten in the visible and near-infrared domains: an experimental and theoretical study10.1088/1361-6463/aa81f3 ↗
40. Material perceptions and advances in molecular heteroacenes for organic solar cells10.1039/D0EE02461A ↗
41. Optical characteristics of nano-polycrystalline diamond synthesized directly from graphite under high pressure and high temperature
42. Infrared drying
43. 2017
44. A stepped-bar apparatus for thermal resistance measurements10.1115/1.4025116 ↗
45. A high-precision apparatus for the characterization of thermal interface materials10.1063/1.3193715 ↗
46. Modest · 2013
47. Bergman · 2011
48. Howell · 2020
49. General models for estimating daily global solar radiation for different solar radiation zones in mainland China10.1016/j.enconman.2013.03.004 ↗
50. Taylor · 1994
51. Uncertainty estimation and Monte Carlo simulation method10.1016/S0955-5986(01)00015-2 ↗
52. Standard deviations and standard errors10.1136/bmj.331.7521.903 ↗
53. Monte Carlo simulations applied to uncertainty in measurement
54. McMurray · 2017
55. Taulaukian · 1970
56. Thermal conductivity and electrical resistivity of high-purity copper from 78 to 400 K10.1139/p67-323 ↗
57. Total hemispherical emissivity of W (100)10.1364/JOSA.70.000443 ↗
58. Temperature variation of total hemispherical emissivity of stainless steel AISI 30410.1364/JOSA.69.001384 ↗
59. Burns · 1989
60. A novel 50kW 11,000 suns high-flux solar simulator based on an array of xenon arc lamps10.1115/1.2769701 ↗
61. Study on the radiation flux and temperature distributions of the concentrator–receiver system in a solar dish/stirling power facility10.1016/j.applthermaleng.2011.02.023 ↗
62. Optical analysis of a hexagonal 42kWe high-flux solar simulator10.1016/j.egypro.2014.10.213 ↗
63. Simulation and experimental study on a spiral solid particle solar receiver10.1016/j.apenergy.2013.06.045 ↗
64. Alternative low-power plasma-sprayed inconel 625 coatings for thermal solar receivers: Effects of high temperature exposure on adhesion and solar absorptivity10.1016/j.solmat.2022.111839 ↗
65. Greene · 2000
66. Physical properties of selected brazing filler metals10.1179/136217104225021760 ↗
67. Brazing of stainless steel to yttria-stabilized zirconia using gold-based brazes for solid oxide fuel cell applications10.1111/j.1744-7402.2007.02126.x ↗
68. Inverse design of an optical film filter by a recurrent neural adjoint method: an example for a solar simulator10.1364/JOSAB.424724 ↗
69. Evaluation of empirical models for predicting monthly mean horizontal diffuse solar radiation10.1016/j.rser.2015.11.058 ↗