Mitigation of shunt in poly-Si/SiO passivated interdigitated back contact monocrystalline Si solar cells by self-aligned etching between doped fingers
Source abstract
Abstract
Polycrystalline silicon on silicon oxide ( poly-Si/SiO x ) passivating contacts can be used for ultra-high-efficiency interdigitated back contact (IBC) monocrystalline silicon solar cells. We evaluate the use of intrinsic poly-Si for the region that isolates the p- and n-type fingers at the back side of IBC devices. To mitigate shunt across the isolation region between the doped p- and n-type fingers, we demonstrate self-aligned subtractive processing by etching the poly-Si in the isolation region using SF 6 plasma followed by etching in a tetramethylammonium hydroxide (TMAH) solution. After removal of the poly-Si, the isolation region was passivated with SiN x and Al 2O 3, which resulted in an 11.7% increase in the fill factor in a 19.8% efficient device. Furthermore, we evaluate the limitations of this device through Suns- V oc analysis and simulations using SunSolve and Quokka3 solar cell simulation software. Through Quokka3, we show that the most significant efficiency losses come from junction recombination current ( J 02) in the isolation region between doped fingers. We predict that the cell efficiency can be most improved with reduced J 02 through better isolation of heavily doped fingers by etching the isolation region deeper into the bulk or through enhanced surface chemical passivation in this region.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. International technology roadmap for photovoltaics (ITRPV): crystalline silicon technology-current status and outlook
2. Solar cell efficiency tables (version 52)10.1002/pip.3040 ↗
3. Highly passivating and blister-free hole selective poly-silicon based contact for large area crystalline silicon solar cells10.1016/j.solmat.2019.109912 ↗
4. 20.8% industrial PERC solar cell: ALD Al 2 O 3 rear surface passivation, efficiency loss mechanisms analysis and roadmap to 24%10.1016/j.solmat.2016.11.018 ↗
5. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
6. High-eficiency silicon solar cells: Si/SiO2, interface parameters and their impact on device performance10.1002/pip.4670020402 ↗
7. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
8. Comparative study of differently grown tunnel oxides for p-type passivating contacts10.1016/j.egypro.2017.09.273 ↗
9. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
10. Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities
11. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
12. Perimeter recombination in 25%-efficient IBC solar cells with passivating POLO contacts for both polarities10.1109/JPHOTOV.2017.2762592 ↗
13. 26.1%-efficient POLO-IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
14. Recombination behavior of photolithography-free back junction back contact solar cells with carrier-selective polysilicon on oxide junctions for both polarities10.1016/j.egypro.2016.07.121 ↗
15. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
16. Back contact heterojunction solar cells patterned by laser ablation10.1016/j.egypro.2016.07.051 ↗
17. Desrues · 2014 · 857
18. Optimization of interdigitated back contact silicon heterojunction solar cells: tailoring hetero-interface band structures while maintaining surface passivation10.1002/pip.1032 ↗
19. High-efficiency silicon solar cells: a review10.1002/ijch.201400210 ↗
20. Heavily doped polysilicon-contact solar cells10.1109/EDL.1985.26155 ↗
21. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
22. Review of status developments of high-efficiency crystalline silicon solar cells10.1088/1361-6463/aaac6d ↗
23. Trap-assisted dopant compensation prevents shunting in poly-Si passivating interdigitated back contact silicon solar cells10.1021/acsaem.1c01775 ↗
24. Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell10.1038/s41598-019-57310-0 ↗
25. Simple processing of back-contacted silicon heterojunction solar cells using selective-area crystalline growth10.1038/nenergy.2017.62 ↗
26. Fully screen-printed silicon solar cells with local Al-p+ and n-type POLO interdigitated back contacts with a VOC of 716 mV and an efficiency of 2310.1002/pip.3399 ↗
27. Design, fabrication, and characterization of n-Si IBC solar cells using PERC technology10.1109/JPHOTOV.2019.2958186 ↗
28. Influence of the transition region between p- and n-type polycrystalline silicon passivating contacts on the performance of interdigitated back contact silicon solar cells," (in English)10.1063/1.5004331 ↗
29. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells," (in English)10.1557/jmr.2016.77 ↗
30. Development of heterojunction back contact Si solar cells10.1109/JPHOTOV.2014.2358377 ↗
31. Vasudevan · 2018
32. Low-cost plasma immersion ion implantation doping for Interdigitated back passivated contact (IBPC) solar cells10.1016/j.solmat.2016.05.044 ↗
33. Ion implanted passivated contacts for interdigitated back contacted solar cells
34. Interdigitated back passivated contact (IBPC) solar cells formed by ion implantation10.1109/JPHOTOV.2015.2483364 ↗
35. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
36. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell10.1002/pip.2556 ↗
37. Damage-free ultraviolet nanosecond laser ablation for high efficiency back contact solar cell fabrication10.1016/j.solmat.2014.12.030 ↗
38. Interdigitated back contact silicon heterojunction solar cells featuring an interband tunnel junction enabling simplified processing10.1016/j.solener.2018.01.066 ↗
39. Isolating p- and n- doped fingers with intrinsic poly-Si in passivated interdigitated back contact silicon solar cells10.1109/JPHOTOV.2020.3021668 ↗
40. Green · 1982
41. An overview of dry etching damage and contamination effects10.1149/1.2086322 ↗
42. Near‐surface damage and contamination after CF 4/H 2 reactive ion etching of Si10.1149/1.2114140 ↗
43. Surface damage on Si substrates caused by reactive sputter etching10.1143/JJAP.20.893 ↗
44. Low damage reactive ion etching for photovoltaic applications10.1116/1.581644 ↗
45. Characterization and removal of silicon surface residue resulting from CHF3/C2F6 reactive ion etching10.1063/1.357294 ↗
46. Heavily boron-doped silicon layer for the fabrication of nanoscale thermoelectric devices10.3390/nano8020077 ↗
47. Tuning of etching rate by implantation: silicon, polysilicon and oxide10.1063/1.2401523 ↗
48. Measurement of poly-Si film thickness on textured surfaces by X-ray diffraction in poly-Si/SiOx passivating contacts for monocrystalline Si solar cells10.1016/j.solmat.2021.111510 ↗
49. Self-aligned selective area front contacts on Poly-Si/SiOx passivating contact c-Si solar cells10.1109/JPHOTOV.2022.3148719 ↗
50. Influence of tabula rasa on process-and light-induced degradation of solar cells fabricated from Czochralski silicon10.1109/JPHOTOV.2020.3020214 ↗
51. A free and fast three-dimensional/two-dimensional solar cell simulator featuring conductive boundary and quasi-neutrality approximations10.1109/TED.2012.2231415 ↗
52. 3-D simulation of interdigitated-back-contact silicon solar cells with Quokka including perimeter losses10.1109/JPHOTOV.2014.2320302 ↗
53. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
54. Modeling solar cells with the dopant-diffused layers treated as conductive boundaries10.1002/pip.954 ↗
55. Optimization of micron size passivated contact and doping level for high efficiency interdigitated back contact solar cells10.1016/j.solener.2018.12.049 ↗
56. Independent Al2O3/SiNx:H and SiO2/SiN x:H passivation of p+ and n+ silicon surfaces for high-performance interdigitated back contact solar cells10.1109/JPHOTOV.2016.2617042 ↗
57. Simulation results: optimization of contact ratio for interdigitated back-contact solar cells10.1155/2017/7818914 ↗
58. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
59. Screen-Printed metallization concepts for large-area back-contact back-junction silicon solar cells10.1109/JPHOTOV.2015.2484960 ↗
60. Evaluation of screen-printed metallization concepts for large-area BC-BJ solar cells
61. Laser-doped back-contact solar cells10.1109/JPHOTOV.2015.2411058 ↗
62. Local series resistance imaging of silicon solar cells with complex current paths10.1109/JPHOTOV.2015.2397595 ↗
63. Ion-Implanted laser-annealed p+ and n+ regions: a potential solution for industrially feasible high-efficiency N-type interdigitated back-contact solar cells10.1109/JPHOTOV.2014.2361211 ↗
64. Opto-electrical approaches for high efficiency and ultra-thin c-Si solar cells
65. Modeling edge recombination in silicon solar cells10.1109/JPHOTOV.2017.2787020 ↗
66. Vogt · 2015
67. Optimised antireflection coatings using silicon nitride on textured silicon surfaces based on measurements and multidimensional modelling10.1016/j.egypro.2012.02.009 ↗
68. Rear side dielectrics on interdigitating p+-(i)-n+ back-contact solar cells− hydrogenation vs. charge effects