Optimized molecular beam epitaxy process for lattice-matched narrow-bandgap (0.8 eV) GaInNAsSb solar junctions
Source abstract
Abstract
High performance narrow-bandgap GaInNAsSb solar cells are instrumental for the development of lattice-matched GaAs-based solar cells with more than four junctions. To this end a comprehensive optimization process including the effects of growth temperature, As/III beam equivalent pressure ratio, and Sb flux on the performance of 0.8 eV GaInNAsSb solar cells grown by molecular beam epitaxy is reported. For this, sets of GaInNAsSb p-i-n solar cell structures with 5–6% nitrogen compositions were fabricated, while varying the key growth parameters. The quantum efficiency and current generation increased significantly when the narrow gap materials were grown at elevated growth temperatures, close to phase separation. A further improvement in the current generation was observed by employing lower As/III beam equivalent pressure ratios. The best GaInNAsSb cell exhibited about 94% peak external quantum efficiency and generated a short-circuit current of 17.7 mA/cm2 with AM1.5D (1000 W/m2) illumination at wavelengths above 900 nm without employing a back surface reflector. Our analysis indicates that the best cell is already close to being absorption limited. While the N composition should be kept as low as possible (i.e., ≲5%) to achieve high performance, increasing the Sb flux generally results in improved the material quality, i.e., leading to a slight improvement for the open-circuit voltages and fill factors. In addition, it was found that the phase separation observed at the growth temperature of 480 °C could effectively be inhibited by employing higher Sb fluxes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Solar cell efficiency tables (Version 58)10.1002/pip.3444 ↗
2. Fraunhofer
3. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
4. High-efficiency multijunction solar cells employing dilute nitrides10.1063/1.4753823 ↗
5. Wide spectral coverage (0.7–2.2 eV) lattice-matched multijunction solar cells based on AlGaInP, AlGaAs and GaInNAsSb materials
6. Fraunhofer · 2017
7. Projected performance of three- and four-junction devices using GaAs and GaInP
8. Optical properties of lattice-matched GaAsPBi multiple quantum wells grown on GaAs (001)10.1088/1361-6641/abe65d ↗
9. Dilute bismide and nitride alloys for mid-IR optoelectronic devices10.1016/B978-0-08-102709-7.00011-5 ↗
10. Solubility of nitrogen in binary III–V systems10.1016/S0022-0248(97)00078-X ↗
11. Inclusion of strain effect in miscibility gap calculations for III-V semiconductors Japanese J10.1143/JJAP.39.5751 ↗
12. Kinetic modeling of N incorporation in GaInNAs growth by plasma-assisted molecular-beam epitaxy10.1063/1.126928 ↗
13. Composition dependent growth dynamics in molecular beam epitaxy of GaInNAs solar cells10.1016/j.solmat.2014.01.044 ↗
14. Correlation of nitrogen related traps in InGaAsN with solar cell properties10.1063/1.2747664 ↗
15. Harris · 2005 · 1
16. Structure, morphology, and optical properties of Gax In1-x N0.05 As0.95 quantum wells:Influence of the growth mechanism10.1103/PhysRevB.76.085309 ↗
17. Decomposition in as-grown (Ga,In)(N,As) quantum wells10.1063/1.2108108 ↗
18. Defects in dilute nitrides: significance and experimental signatures10.1049/ip-opt:20040939 ↗
19. Concentration of interstitial and substitutional nitrogen in GaNxAs1−x10.1063/1.1465522 ↗
20. Analysis of depletion-region collection in GaInNAs solar cells
21. Recombination processes in N-containing III–V ternary alloys10.1016/S0038-1101(02)00390-8 ↗
22. Dilute nitride GaInNAs and GaInNAsSb solar cells by molecular beam epitaxy10.1063/1.2744490 ↗
23. 31% European InGaP/GaAs/InGaAs solar cells for space application10.1051/e3sconf/20171603003 ↗
24. Performace of dilute nitride triple junction space solar cell grown by MBE10.1051/e3sconf/20171603008 ↗
25. Band gap‐voltage offset and energy production in next‐generation multijunction solar cells10.1002/pip.1044 ↗
26. Will we exceed 50% efficiency in photovoltaics?10.1063/1.3600702 ↗
27. Optimum band gap combinations to make best use of new photovoltaic materials10.1016/j.solener.2016.06.042 ↗
28. Lattice matched dilute nitride materials for III-V high-efficiency multi-junction solar cells: growth parameter optimization in molecular beam epitaxy
29. Nitrogen plasma optimization for high-quality dilute nitrides10.1016/j.jcrysgro.2004.12.060 ↗
30. Molecular beam epitaxial growth of InGaAsN:Sb/GaAs quantum wells for long-wavelength semiconductor lasers10.1063/1.124311 ↗
31. Effects of bismuth on wide-depletion-width GaInNAs solar cells
32. Yuen · 2006
33. Postgrowth annealing of GaInAs∕GaAs and GaInAsN∕GaAs quantum well samples placed in a proximity GaAs box: a simple method to improve the crystalline quality10.1063/1.2943157 ↗
34. Photovoltaic properties of low-bandgap (0.7–0.9 eV) lattice-matched GaInNAsSb solar junctions grown by molecular beam epitaxy on GaAs10.1016/j.solmat.2019.02.030 ↗
35. High performance low-bandgap (0.8 eV) single junction GaInNAsSb solar cells incorporating Au-based back surface reflectors10.1016/j.solmat.2021.111413 ↗
36. Incorporation model of N into GaInNAs alloys grown by radio-frequency plasma-assisted molecular beam epitaxy10.1063/1.4903318 ↗
37. Bandgap energy model for GaInNAsSb/GaAs alloys with high N content and strain influence10.1016/j.jcrysgro.2022.126574 ↗
38. PC1D version 5: 32-bit solar cell modeling on personal computers
39. Theoretical studies of optical gain tuning by hydrostatic pressure in GaInNAs/GaAs quantum wells10.1063/1.4862230 ↗
40. Study of nitrogen incorporation into GaInNAs: the role of growth temperature in molecular beam epitaxy10.1063/1.4737127 ↗
41. Jones-Albertus · 2011
42. Recent Progress on 1.55-μm dilute-nitride lasers10.1109/JQE.2007.902301 ↗
43. The role of antimony on properties of widely varying GaInNAsSb compositions10.1063/1.2191745 ↗
44. Enhanced-depletion-width GaInNAs solar cells grown by molecular-beam epitaxy
45. Dilute nitride GaInNAs and GaInNAsSb for solar cell applications, Proc. SPIE 825610.1117/12.910349 ↗
46. 2003
47. Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
48. Growth of 1‐eV GaNAsSb‐based photovoltaic cell on silicon substrate at different As/Ga beam equivalent pressure ratios10.1002/pip.2705 ↗
49. Aho · 2013 · 86201I
50. Nitrogen related vacancies in GaAs based quantum well superlattices10.1063/1.2335402 ↗
51. Influence of As/group-III flux ratio on defects formation and photovoltaic performance of GaInNAs solar cells10.1016/j.solmat.2016.01.024 ↗
52. Effects of temperature, nitrogen ions, and antimony on wide depletion width GaInNAs
53. p- to n-type conductivity transition in 1.0 eV GaInNAs solar cells controlled by the V/III ratio10.1063/1.4909507 ↗
54. Aho · 2015