journal article·2022-12

Current-voltage characteristics of silicon solar cells: Determination of base doping concentration and hysteresis correction

Tobias Kemmer, Johannes M. Greulich, Alexander Krieg, Stefan Rein

Publisher page

Abstract

The measurement of the current-voltage ( IV ) characteristics is the most important step for quality control and optimization of the fabrication process in research and industrial production of silicon solar cells. The occurrence of transient errors and hysteresis effects in IV-measurements can hamper the direct analysis of the IV -data of high-capacitance silicon solar cells. We propose a novel procedure to reconstruct a quasi-steady-state (qss) IV-characteristics from hysteretic measurements by aligning the generalized current density of forward and backward sweeps. In the process, the base doping concentration N B and the cell thickness d are used as optimization parameters and calculated alongside the qss- IV -curve. We summarize the theory behind the method, describe the experimental implementation and verify the applicability of the approach by comparing the extracted doping concentration to multiple alternative methods. For a test set of more than 100 silicon heterojunction solar cells with doping concentrations between 3 and 7∙10 15 cm -3 a RMSD <3.4∙10 14 cm -3 is achieved. Basic parameter extraction from the qss- IV-curve closely match reference values with a RMSD <0.1 % abs in efficiency and fill factor.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. D.L. King, J.M. Gee, B.R. Hansen, Measurement precautions for high-resistivity silicon solar cells, in: Conference Record of the Twentieth IEEE Photovoltaic Specialists Conference, Las Vegas, NV, USA, IEEE, 9/26/1996 - 9/30/1988, 555-559 vol.vol. 1.10.1109/PVSC.1988.105763 ↗
2. Review of rear emitter silicon heterojunction solar cells10.1007/s42341-020-00172-5 ↗
3. In-depth analysis of transient errors of inline IV measurements10.1016/j.egypro.2011.06.106 ↗
4. Uncertainty in PV module measurement—Part I: calibration of crystalline and thin-film modules10.1109/JPHOTOV.2013.2260595 ↗
5. Effects of I–V measurement parameters on the hysteresis effect and optimization in high-capacitance PV module testing10.1109/JPHOTOV.2018.2810852 ↗
6. Optimal I-V curve scan time of solar cells and modules in light of irradiance level10.1155/2012/151452 ↗
7. Understanding and overcoming the influence of capacitance effects on the measurement of high efficiency silicon solar cells10.1016/j.egypro.2012.07.062 ↗
8. Optimising I-V measurements of high capacitance modules using dark impedance measurements
9. Photovoltaic modules transient response analysis and correction under a fast characterization system10.1016/j.solener.2021.03.032 ↗
10. Lipps · 1995
11. S. Winter, J. Metzdorf, Correction procedures for the flasher calibration of PV devices resulting in reduced restrictions and uncertainties, in: 2nd World Conf. On PV Solar Energy Conversion.
12. The effects of solar cell capacitance on calibration accuracy when using a flash simulator
13. Accurate efficiency measurements on very high efficiency silicon solar cells using pulsed light sources
14. Capacitance effects in high-efficiency cells10.1016/S0927-0248(97)00072-X ↗
15. I–V-curve analysis using evolutionary algorithms: hysteresis compensation in fast sun simulator measurements of HJT cells10.1016/j.solmat.2022.111628 ↗
16. Assessing transient measurement errors for high-efficiency silicon solar cells and modules10.1109/JPHOTOV.2017.2753200 ↗
17. Generalized analysis of quasi-steady-state and transient decay open circuit voltage measurements10.1063/1.1416134 ↗
18. Generalized analysis of quasi-steady-state and quasi-transient measurements of carrier lifetimes in semiconductors10.1063/1.371633 ↗
19. Capacitive effects in high-efficiency solar cells during I-V curve measurement: considerations on error of correction and extraction of minority carrier lifetime
20. Challenges and opportunities in cell and module I-V testing
21. Determination of base doping concentration of silicon solar cells from light IV-curves
22. Sinton · 2013
23. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: 16th European Photovoltaic Solar Energy Conference.
24. Using doping variation to determine J0s at I-V test
25. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
26. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
27. Series resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗
28. Accurate series resistance measurement of solar cells10.1002/pip.1216 ↗
29. A new method for accurate measurements of the lumped series resistance of solar cells
30. Dicker · 2003
31. Kimmerle · 2015
32. Determination of the impurity distribution in junction diodes from capacitance-voltage measurements
33. Dispensing of low-temperature silver pastes