Pilot-scale NO removal efficacy of photocatalytic roofing granules under urban environmental conditions
Source abstract
Abstract
Photocatalytic building envelope materials harness sunlight to activate self-cleaning and de-polluting properties, which can help mitigate the urban heat island effect and abate urban pollution. The performance of roofing membranes manufactured with bright-white photocatalytic (BWP) granules, and with a non-photocatalytic bright-white control (BWC), were evaluated. The solar reflectance of unexposed specimens was 0.56 for BWP and 0.60 for BWC. Small changes in solar reflectance with respect to the initial values were observed during 22 months of field exposure between March 2020 and January 2022, indicating good resistance to soiling. Changes in the de-pollution capacity during the same period were quantified with a bench-scale method adapted from the ISO Standard 22197-1, in which unexposed and aged specimens were placed horizontally inside a flow chamber admitting clean air enriched with nitric oxide (NO) under UV irradiation. In addition, a pilot-scale approach was developed to evaluate the photocatalytic performance of the same materials under more realistic urban environmental conditions. An outdoor exposure chamber was designed and built with a rectangular stainless-steel main body topped with a UV-transparent fluorinated ethylene propylene (FEP) thin film. The area of the 30 cm × 90 cm BWP specimen tested in the outdoor chamber was more than one order of magnitude larger than those evaluated in the benchtop apparatus. The BWP membrane was pre-activated by field exposure for 75 days. The pilot-scale chamber operation was validated in the laboratory using UV lamps to irradiate the BWP membrane and a reference TiO2-coated aluminum plate (P25, 1 g m−2) of the same dimensions. Tests showed comparable or better performance of the BWP membrane with respect to the P25 film. Its de-pollution capacity was tested with direct sunlight irradiation in Berkeley, California (37.88° N, 122.25° W) during June 2020. Urban air was enriched with NO, or with a NO/NO2 mixture, and circulated through the pilot-scale chamber at two different flows: 1.1 and 440 L min−1. The gas phase concentrations of NO and NO2 were measured upstream and downstream of the tested specimen with a chemiluminescence analyzer. Upstream levels of the challenge gases were high but realistic, not exceeding 200 ppb. The UV irradiance outdoors (15–30 W m−2) was higher and more variable than in indoor tests (11.5 W m−2), leading to overall higher NO deposition velocity under direct sunlight. In outdoor measurements, the NO deposition velocity increased at higher irradiances. When NO was the only challenge gas, a fraction of NO was oxidized to NO2 resulting in lower NO and higher NO2 downstream concentrations. However, when tested with NO/NO2 mixtures, the concentration of both compounds decreased during irradiation, and the surface showed a faster loss of photoactivity for NO2, compared with NO. These effects are consistent with those observed in the laboratory. The NOx deposition velocity outdoors was 0.7 and 105 μmol h−1 m−2 for the low and high air flow, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Urban Heat Island Mitigation · Air Quality and Health Impacts · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Gel-sol synthesis of surface-treated TiO2 nanoparticles and incorporation with waterborne acrylic resin systems for clear UV protective coatings10.1007/s11998-014-9583-x ↗
2. Long term self-cleaning and photocatalytic performance of anatase added mortars exposed to the urban environment10.1016/j.conbuildmat.2015.08.028 ↗
3. Photocatalytic effects of TiO2 mesoporous coating immobilized on clay roofing tiles10.1016/j.jeurceramsoc.2013.07.010 ↗
4. Investigation of the durability of porous mineral substrates with newly designed TiO2-LDH coating10.1016/j.ceramint.2015.04.050 ↗
5. Field study in an urban environment of simultaneous self-cleaning and hydrophobic nanosized TiO2-based coatings on stone for the protection of building surface10.1016/j.scitotenv.2018.10.044 ↗
6. Characterization of photocatalytic and superhydrophilic properties of mortars containing titanium dioxide10.1016/j.cemconres.2008.07.003 ↗
7. TiO2 photocatalysis in cementitious systems: insights into self-cleaning and depollution chemistry10.1016/j.cemconres.2011.12.001 ↗
8. Photocatalytic performances in a city tunnel in Rome: NOx monitoring results10.1016/j.conbuildmat.2011.07.065 ↗
9. De-pollution efficacy of photocatalytic roofing granules10.1016/j.buildenv.2019.03.056 ↗
10. Self-cleaning and de-pollution efficacies of photocatalytic architectural membranes10.1016/j.apcatb.2020.119260 ↗
11. Measurement of benzene, toluene, ethylbenzene and o-xylene gas phase photodegradation by titanium dioxide dispersed in cementitious materials using a mixed flow reactor10.1016/j.apcatb.2005.04.009 ↗
12. Photocatalytic degradation of SO2 using TiO2-containing silicate as a building coating material10.1016/j.conbuildmat.2013.02.012 ↗
13. Radiation-free superhydrophilic and antifogging properties of e-beam evaporated TiO2 films on glass10.1016/j.apsusc.2017.05.077 ↗
14. Purification of ambient air by novel green plant with titanium dioxide nanoparticles10.4103/ijpvm.IJPVM_586_20 ↗
15. Key parameters influencing the uptake of m-xylene on photocatalytic paints10.1016/j.buildenv.2020.106979 ↗
16. Smart surfaces: photocatalytic degradation of priority pollutants on TiO2-based coatings in indoor and outdoor environments-principles and mechanisms
17. Environmental applications of semiconductor photocatalysis10.1021/cr00033a004 ↗
18. Developing scenario of titania-based building materials for environmental remediation10.1007/s13762-020-02952-1 ↗
19. Modified TiO2 based photocatalysts for improved air and health quality10.1016/j.jmat.2016.11.002 ↗
20. Using reflective pavements to mitigate urban heat island in warm climates - results from a large scale urban mitigation project10.1016/j.uclim.2017.02.002 ↗
21. Changes in year-round air temperature and annual energy consumption in office building areas by urban heat-island countermeasures and energy-saving measures10.1016/j.apenergy.2007.06.012 ↗
22. Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions10.1016/j.solener.2010.12.023 ↗
23. Levinson · 2019
24. 2016
25. Influence of inlet concentration and light intensity on the photocatalytic oxidation of nitrogen(II) oxide at the surface of Aeroxide(R) TiO2 P2510.1016/j.jhazmat.2011.11.041 ↗
26. Field study of NOx degradation by a mineral-based air purifying paint10.1016/j.buildenv.2018.06.014 ↗
27. Photocatalytic air purification: effect of HNO3 accumulation on NOx and VOC removal10.1016/j.cattod.2021.04.017 ↗
28. Supersensitive test of photocatalytic activity based on ISO 22197-1:2016 for the removal of NO10.1016/j.jphotochem.2020.112734 ↗
29. Influence of inorganic additives on the photocatalytic removal of nitric oxide and on the charge carrier dynamics of TiO2 powders10.1016/j.jphotochem.2018.01.036 ↗
30. Kinetics of the photocatalysed oxidation of NO in the ISO 22197 reactor10.1016/j.jphotochem.2016.01.010 ↗
31. What is Degussa (Evonik) P25? Crystalline composition analysis, reconstruction from isolated pure particles and photocatalytic activity tests10.1016/j.jphotochem.2010.07.024 ↗
32. Photocatalytic coating
33. Photocatalytic composition and method for preventing algae growth on building materials
34. Ozone consumption and volatile byproduct formation from surface reactions with aircraft cabin materials and clothing fabrics10.1016/j.atmosenv.2007.10.001 ↗
35. The rate of ozone uptake on carpets: experimental studies10.1021/es001361h ↗
36. The influence of aspect ratios and solar heating on flow and ventilation in 2D street canyons by scaled outdoor experiments10.1016/j.buildenv.2020.107159 ↗
37. Integrated impacts of tree planting and aspect ratios on thermal environment in street canyons by scaled outdoor experiments10.1016/j.scitotenv.2020.142920 ↗