Bias dependent admittance spectroscopy of thin film solar cells: KF post deposition treatment, accelerated lifetime testing, and their effect on the CVf loss maps
Source abstract
Abstract
Abstract Modern solar cell designs include an always larger variety of elements and additional layers. This approach is usually successful and leads to the development of increasingly efficient materials. However, scientifically, it makes the drawing of accurate conclusions always more challenging, due to the growing number of elements, possible defects, interfaces, and barriers. To try and remedy this problem, we developed a novel way to investigate solar cells by representing bias dependent admittance spectroscopy (CVf) measurement data in the form of a 2D loss map. In this contribution, we elaborate how this technique can be used experimentally, present some concrete results we obtained from measurements on ultra-thin CIGS solar cells and explain how they can be interpreted. We identify 3 major response domains on our typical CVf loss maps. One at high frequency that covers most of the bias range and can be related to series resistance. One at low frequency, mostly visible at strong positive and negative biases, which is related to shunt and dissipation. The last response domain, close to 100 kHz and impacting most of the bias range, can be identified as a defect response of the material. Using CVf measurements on samples with KF post deposition treatment, known for its grain boundary passivation properties, and samples that were previously submitted to accelerated lifetime testing in damp heat conditions, the impact of bulk defects, grain boundaries and conduction band offsets are investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
2. Alkali treatment for single-stage co-evaporated thin CuIn0.7Ga0.3Se2 solar cells10.1016/j.tsf.2018.12.022 ↗
3. High V oc upon KF post-deposition treatment for ultrathin single-stage coevaporated Cu(in, Ga)Se 2 solar cells10.1021/acsaem.9b01370 ↗
4. Effects of rubidium fluoride and potassium fluoride postdeposition treatments on Cu(in,Ga)Se2 thin films and solar cell performance, chem
5. Advanced alkali treatments for high-efficiency Cu(in,Ga)Se2 solar cells on flexible substrates, adv
6. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
7. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
8. Heavy alkali treatment of Cu(in,Ga)Se2 solar cells: surface versus bulk effects, adv
9. Review on alkali element doping in Cu(in,Ga)Se2 thin films and solar cells10.1016/J.ENG.2017.04.020 ↗
10. Electronic structure of the CdS/Cu(in,Ga)Se 2 interface of KF- and RbF-treated samples by Kelvin probe and photoelectron yield spectroscopy10.1021/acsami.0c20976 ↗
11. The Zn(S, O,OH)/ZnMgO buffer in solar cells Part I: fast chemical thin film Cu(in,Ga)(S,Se)2-Based bath deposition of Zn(S, O,OH) buffer layers for industrial application on Co-evaporated CuIn(S,Se)2 solar cells Cu(in,Ga)Se2 and electrodeposited, prog10.1002/pip.898 ↗
12. Highly-efficient Cd-free CuInS2 thin-film solar cells and mini-modules with Zn(S,O) buffer layers prepared by an alternative chemical bath process, prog10.1002/pip.682 ↗
13. Fast chemical bath deposition of Zn(O,S) buffer layers for Cu(In,Ga)Se 2 solar cells10.1016/j.tsf.2011.01.104 ↗
14. Cu(In,Ga)Se2 solar cell with Zn(S,O) as the buffer layer fabricated by a chemical bath deposition method10.1016/j.solener.2018.06.070 ↗
15. Nicollian
16. Determination of defect distributions from admittance measurements and application to Cu ( In, Ga ) Se2 based heterojunctions Determination of defect distributions from admittance measurements and application to Cu ( In, Ga ) Se 2 based heterojunctions10.1063/1.363401 ↗
17. Advanced characterization techniques for thin film solar CThomasells
18. Admittance spectroscopy of thin film solar cells10.1016/j.ssi.2004.08.048 ↗
19. Buffer layers, defects, and the capacitance step in the admittance spectrum of a thin-film solar cell, phys
20. Metastable defect measurement from capacitance-voltage and admittance measurements in Cu(In, Ga)Se2 Solar Cells
21. Understanding the AC equivalent circuit response of ultrathin Cu(in,Ga)Se2 solar cells10.1109/JPHOTOV.2019.2927918 ↗
22. Investigation of properties limiting efficiency in Cu2ZnSnSe4-based solar cells10.1109/JPHOTOV.2014.2376053 ↗
23. Physical and electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
24. Distinction between bulk and interface states in spectroscopy Distinction between bulk and interface states in CuInSe 2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
25. Defect distributions in thin film solar cells deduced from admittance measurements under different bias voltages10.1063/1.3641987 ↗
26. Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se2thin film solar cells10.1063/1.3277043 ↗
27. Characterization of metastabilities in Cu(In,Ga)Se2 thin-film solar cells by capacitance and current-voltage spectroscopy10.1063/1.3656453 ↗
28. Bias-dependent admittance spectroscopy of thin-film solar cells: experiment and simulation, IEEE10.1109/JPHOTOV.2020.2992350 ↗
29. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
30. Inclusion of water in Cu(in, Ga)Se 2 absorber material during accelerated lifetime testing10.1021/acsaem.0c00610 ↗
31. Wet processing in state-of-the-art cu(In,ga)se2 thin film solar cells10.4028/www.scientific.net/SSP.282.300 ↗
32. Optimizing Ga-profiles for highly efficient Cu(In, Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
33. Impact of wide-ranging nanoscale chemistry on band structure at Cu(in, Ga)Se2 grain boundaries, sci
34. Rubidium distribution at atomic scale in high efficient Cu(In,Ga)Se2 thin-film solar cells10.1063/1.5020805 ↗
35. Overall distribution of rubidium in highly efficient Cu(in,Ga)Se2 solar cells10.1021/acsami.8b16040 ↗
36. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
37. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
38. Revealing the beneficial role of K in grain interiors, grain boundaries, and at the buffer interface for highly efficient CuInSe2 solar cells10.1002/pip.3022 ↗
39. Influence of Na on grain boundary and properties of Cu(In,Ga)Se2 solar cells10.1002/pip.2869 ↗
40. Influence of RbF post deposition treatment on heterojunction and grain boundaries in high efficient (21.1%) Cu(In,Ga)Se 2 solar cells10.1016/j.nanoen.2019.03.028 ↗
41. Grain boundaries in Cu(In,∈Ga)(Se,∈S)2 thin-film solar cells10.1007/s00339-008-4978-0 ↗