Luminescence based high resolution finite element simulation of inhomogeneous solar cells
Source abstract
Abstract
Abstract The application of the model of independent diodes with an effective series resistance in units of Ωcm2 leads to wrong predictions of the local diode voltages in solar cells, if their dark current is strongly inhomogeneous. Therefore, multicrystalline solar cells should be modelled by finite element methods such as that implemented in Griddler. Until now, the local parameters for this modelling were obtained for inhomogeneous solar cells by evaluating luminescence and dark lock-in thermography (DLIT) images. The inhomogeneous local diode parameters, in particular the saturation current density J01, were obtained by the DLIT-based analysis (Local I-V), and the local emitter contact resistances were obtained by evaluating luminescence-based local diode voltages. This method, however, is experimentally demanding and shows a limited spatial resolution due to thermal blurring of the DLIT results. Previous luminescence-based methods for imaging J01, based on the model of independent diodes, have been found to be erroneous. In this model it is assumed that each elementary cell region (image pixel) is connected to the terminals of the cell by an independent series resistance (Trupke et al., 2007) [1]. Meanwhile alternative luminescence evaluation methods are available for reliably imaging J01 with high spatial resolution. This opens the way for a purely luminescence-based finite element simulation of inhomogeneous solar cells. In this contribution this method is described and applied to a multicrystalline PERC cell made from high performance silicon material. The results are compared to that of a luminescence plus DLIT based evaluation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. High-performance p-type multcrystalline silicon (ms-Si): its characterization and projected performance in PERC cells10.1016/j.solener.2018.01.073 ↗
2. Photovoltaics Report (Fraunhofer ISE 2018), p. 19, see 〈www.ise.fraunhofer.de〉.
3. Nondestructive local analysis of current-voltage characteristics of solar cells by lock-in thermography10.1016/j.solmat.2011.05.049 ↗
4. Local efficiency analysis of solar cells based on lock-in thermography10.1016/j.solmat.2012.07.019 ↗
5. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
6. J. Wong, Griddler: Intelligent computer aided design of complex solar cells, Proc. 40th IEEE PVSC, Tampa, 2013, pp. 933–938.10.1109/PVSC.2013.6744296 ↗
7. P. Nenzi, Ngspice circuit simulator release 26, 2014, see 〈http://ngspice.sourceforge.net/〉 (May 2018).
8. Finite element simulation of inhomogeneous solar cells based on lock-in thermography and luminescence imaging10.1016/j.solmat.2016.12.037 ↗
9. Alternative luminescence image evaluation - Comparison with lock-in thermography10.1016/j.solmat.2017.06.003 ↗
10. Laplacian photoluminescence image evaluation employing image deconvolution10.1016/j.solmat.2015.11.035 ↗
11. Towards an improved Laplacian-based photoluminescence image evaluation method10.1016/j.solmat.2015.06.020 ↗
12. Improved Laplacian photoluminescence image evaluation regarding the local diode back voltage distribution10.1016/j.solmat.2017.09.001 ↗
13. Improved empirical method for calculating short circuit current density images of silicon solar cells from saturation current density images and vice versa10.1016/j.solmat.2016.04.047 ↗
14. Advanced local characterization of silicon solar cells10.1002/pssa.201700611 ↗
15. see 〈http://de.mathworks.com/products/matlab/index.html?RequestedDomain=uk.mathworks.com〉 (May 2018).
16. F. Frühauf, Ph.D. dissertation, Martin Luther University Halle-Wittenberg, submitted May 2018.
17. see 〈www.trinasolar.com〉.
18. Effective diffusion length and bulk saturation current density imaging in solar cells by spectrally filtered luminescence imaging10.1109/JPHOTOV.2016.2571621 ↗
19. An improved method to measure the point spread function of cameras used for electro- and photoluminescence imaging of silicon solar cells10.1109/JPHOTOV.2016.2514744 ↗
20. DLIT- versus ILIT-based efficiency imaging of solar cells10.1016/j.solmat.2017.05.015 ↗