journal article·2017-07

Impact of anodic aluminum oxide fabrication and post-deposition anneal on the effective carrier lifetime of vertical silicon nanowires

Van Hoang Nguyen, Porponth Sichanugrist, Shinya Kato, Noritaka Usami

Publisher page

Abstract

Abstract The impact of the anodization process of anodic aluminum oxide fabrication and post-deposition anneal on effective carrier lifetime of Si nanowires are reported. The anodization process with suitable switched-off anodization currents results in enhanced effective carrier lifetime of Si nanowires that are significantly higher than that of early and late switched-off anodization currents. Furthermore, the anodic aluminum oxide template exhibits an efficient passivation upon post-deposition anneal, yielding a maximum value of 228 μs under thermal treatment at 650 °C. First fabrication of Si nanowire solar cell embedded with anodic aluminum oxide template was carried out. Through post-deposition anneal prior to the fabrication of Si nanowire solar cells, the performance of Si nanowire solar cells was significantly improved. This established the impact of thermal treatment on opto-electronic characteristics of Si nanowires embedded with anodic aluminum oxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Anodic Oxide Films and Nanostructures · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Fabrication and microstructuring of hexagonally ordered two-dimensional nanopore arrays in anodic alumina10.1002/(SICI)1521-4095(199904)11:6<483::AID-ADMA483>3.0.CO;2-I ↗
2. High-aspect-ratio and highly ordered 15-nm porous alumina templates10.1021/am3020718 ↗
3. Synthesis of well-ordered nanopores by anodizing aluminum foils in sulfuric acid10.1149/1.1481527 ↗
4. Growth of segmented gold nanorods with nanogaps by the electrochemical wet etching technique for single-electron transistor applications10.1088/0957-4484/20/12/125607 ↗
5. Synthesis of epitaxial Si(100) nanowires on Si(100) substrate using vapor–liquid–solid growth in anodic aluminum oxide nanopore arrays10.1007/s00339-007-3984-y ↗
6. Development of a functional chromosome nano-dissection system using porous anodic alumina pattern chip and cantilever10.1143/JJAP.46.2764 ↗
7. Fabrication of gold nanodot array using anodic porous alumina as an evaporation mask10.1143/JJAP.35.L126 ↗
8. Guide growth of carbon nanotube arrays using anodic porous alumina with Ni catalyst10.1143/JJAP.45.333 ↗
9. Controlled fabrication of silicon nanowires by electron beam lithography and electrochemical size reduction10.1021/nl0481573 ↗
10. Metal-assisted chemical etching of silicon and nanotechnology applications10.1016/j.nantod.2014.04.013 ↗
11. Selective growth of vertical silicon nanowire array guided by anodic aluminum oxide template10.7567/JJAP.54.095003 ↗
12. Effects of anodization process of aluminum oxide template fabrication on selective growth of Si nanowire arrays10.7567/JJAP.54.08KA02 ↗
13. Evidence for efficient passivation of vertical silicon nanowires by anodic aluminum oxide10.1016/j.solmat.2016.07.002 ↗
14. Simple approach for improving gold deposition inside nanoporous alumina template on Si substrate10.1016/j.apsusc.2014.02.103 ↗
15. Growth kinetics, silicon nucleation on silicon dioxide, and selective epitaxy using disilane and hydrogen in an ultrahigh vacuum rapid thermal chemical vapor deposition reactor10.1149/1.2059317 ↗
16. Mechanisms of disilane decomposition on Si(111)-7×710.1016/0039-6028(90)90615-F ↗
17. Modulated molecular beam scattering of disilane on silicon10.1016/0039-6028(90)90614-E ↗
18. Growth kinetics, silicon nucleation on silicon dioxide, and selective epitaxy using disilane and hydrogen in an ultrahigh vacuum rapid thermal chemical vapor deposition reactor10.1149/1.2059317 ↗
19. Relationship between thermal treatment conditions and minority carrier lifetimes in p-type, FZ Si wafers10.1016/S0927-0248(00)00126-4 ↗