journal article·2024-07Open access

Aging mechanisms for high-temperature solar absorber coatings under extensive thermal cycling

Sahar Hosseini, Juan F. Torres, Mahdiar Taheri, Kaoru Tsuda, Antonio Tricoli, Wojciech Lipiński, Joe Coventry

Abstract

Solar absorber coatings play a crucial role in the efficiency and longevity of concentrating solar power systems. Thermal stresses caused by fluctuating solar conditions from the passage of clouds contribute to the degradation and failure of these coatings. This paper investigates how different factors in a thermal cycling test regime impact aging mechanisms. Two different thermal cycling tests were examined – rapid cycling (RC) and cycle and hold (CH) – and compared with isothermal test results. Varied test parameters include temperature ramp rate, depth of cycling, and holding time at peak temperature. Aging mechanisms were examined in the context of two distinctly different coatings, the well-known Pyromark 2500 coating and a recently developed coral-structured coating with hierarchical features. For Pyromark 2500, the results indicate that test conditions inducing higher thermal stresses accelerate the sintering and crystallisation rate. In particular, the combined cycle and hold test is shown to accelerate key aging mechanisms, including oxide layer growth, elemental diffusion, phase formation and crystallisation, and has significant influence on optical degradation and failure rates. The coral-structured coating demonstrated superior optical, morphological, and chemical stability compared to Pyromark 2500 samples under all test conditions. It is recommended that, where Pyromark 2500 is selected as a benchmark to compare to new coatings, a cycle and hold test is included in the testing program.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Highly efficient and durable solar thermal energy harvesting via scalable hierarchical coatings inspired by stony corals10.1039/D1EE03028K ↗
2. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
3. Sataloff · 1988
4. Characterization of Pyromark 2500 paint for high-temperature solar receivers
5. Long-term thermal stability testing of the CoteRill®750 solar absorber coating
6. Long-term thermal stability and failure mechanisms of Pyromark 2500 for high-temperature solar thermal receivers10.1016/j.solmat.2022.111898 ↗
7. Concentrating Solar Power
8. Development of high performances solar absorber coatings10.1063/1.5117538 ↗
9. Optical properties and thermal stability of Cu spinel oxide nanoparticle solar absorber coatings10.1016/j.solmat.2019.02.032 ↗
10. Copper-alloyed spinel black oxides and tandem-structured solar absorbing layers for high-temperature concentrating solar power systems10.1016/j.solener.2016.03.007 ↗
11. Development of high absorption, high durability coatings for solar receivers in CSP plants10.1063/1.5067075 ↗
12. Diffractive gratings to improve TiAlN based spectrally selective solar absorbers10.1063/1.5067043 ↗
13. Scalable nano-architecture for stable near-blackbody solar absorption at high temperatures10.1038/s41467-023-44672-3 ↗
14. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications10.1063/1.4984355 ↗
15. Thermal stability of oxide-based solar selective coatings for CSP central receivers
16. High-solar-absorptance CSP coating characterization and reliability testing with isothermal and cyclic loads for service-life prediction10.1039/C8EE03536A ↗
17. Accelerated aging of a solar absorber material subjected to highly concentrated solar flux10.1016/j.egypro.2014.03.176 ↗
18. Degradation mechanisms and non-linear thermal cycling effects in a high-temperature light-absorber coating10.1016/j.solmat.2020.110719 ↗
19. Aging of solar absorber materials under highly concentrated solar fluxes10.1016/j.solmat.2014.01.010 ↗
20. Influence of different thermal degradation processes on the optical property of Pyromark-250010.1016/j.solener.2023.02.004 ↗
21. Accelerated aging of absorber coatings for CSP receivers under real high solar flux – evolution of their optical properties10.1016/j.solmat.2018.12.030 ↗
22. Progress in heat transfer research for high-temperature solar thermal applications10.1016/j.applthermaleng.2020.116137 ↗
23. A comparative analysis of opto-thermal figures of merit for high temperature solar thermal absorber coatings10.1016/j.rser.2021.111818 ↗
24. German · 2010
25. Ultra-fast firing: effect of heating rate on sintering of 3YSZ, with and without an electric field10.1016/j.jeurceramsoc.2017.01.033 ↗
26. Stability and characterisation of Pyromark 2500 cured at different temperatures10.1016/j.solener.2023.112102 ↗
27. Effect of thermal cycling on microstructure evolution and elements diffusion behavior near the interface of Ni/NiAl diffusion couple10.1016/j.jallcom.2015.04.095 ↗
28. Evolution of thermal insulation of plasma-sprayed thermal barrier coating systems with exposure to high temperature evolution of thermal insulation of plasma-sprayed thermal barrier coating systems with exposure to high temperature10.1016/j.jeurceramsoc.2019.01.026 ↗
29. The effect of a high thermal gradient on sintering and stiffening in the top coat of a thermal barrier coating system
30. Mittemeijer · 2010 · 8
31. Durability testing of solar receiver coatings : experimental results for T91 and VM12 substrates10.1063/5.0028772 ↗