journal article·2023-10

Screen printable fire through nickel contacts for silicon solar cells

Berkeli Akgayev, Aysegul Sezgin, Mucahit Yilmaz, Veysel Unsur

Publisher page

Abstract

Metallization of crystalline silicon (Si) solar cells is indispensable for reducing the cost while increasing the overall efficiency. Developing alternative materials to the most commonly used screen printed silver (Ag) contacts is a critical factor. Here, in this study, a nickel (Ni) metal paste consisting of Ni metal particles, glass frit and an organic vehicle is fabricated for screen printed Ni contacts. To prevent possible Schottky barrier formation, a graphene layer is placed on the front surface of the Si solar cell between Ni and Si forming a metal-2Dsemiconductor structure ensuring the ohmic (or ohmic-like) contacts. It is demonstrated here that the graphene is transferred successfully onto the textured front surface of the cells and G/2D peaks are observed clearly, indicating the good quality of the graphene layer. Constituents of Ni metal paste, glass frit and organic vehicle, are fabricated in concordance with nickel metal powder and mixed to achieve optimal electrical output parameters. The findings suggest that the transition temperature of the glass frit is between 270 degrees C and 300 degrees C resulting in around 475 degrees C softening temperature, which gives excellent etching behavior to the paste. The average contact resistance of the screen printed Ni contacts governed by etching process is measured around 6.9 m & omega; cm2. The SEM images of the contacts show a uniform distribution and sintering behavior similar to that of silver counterparts. The light current-voltage measurements read the open circuit voltage of 660 mV, the short circuit density of 39.11 mA/cm2 and the fill factor of 81.4% resulting in around 21% efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Economic viability analysis of silicon solar cell manufacturing: Al-BSF versus PERC10.1016/j.egypro.2017.09.412 ↗
2. Progress in advanced metallization technology at Fraunhofer ISE
3. Rapid thermal processing of cost-effective contacts for silicon solar cells10.1002/pip.3119 ↗
4. Screen printable, non-fire-through copper paste applied as busbar metallization for back contact solar cells10.1063/5.0127359 ↗
5. Progress of atmospheric screen-printable Cu paste for high efficiency PERC solar cells
6. Effect of Ag particle size in thick-film Ag paste on the electrical and physical properties of screen printed contacts and silicon solar cells10.1149/1.2126579 ↗
7. The effects of nano Ag particles on gridline sintering for silicon solar cells
8. The impact of Ag particle size and rapid thermal processing belt speed on contact resistance of a silicon solar cell
9. The impact of Ag particle size and rapid thermal processing belt speed on contact resistance of a silicon solar cell
10. The impact of tellurite glass on contact resistance of the fire through dielectric (FTD) c-Si solar cell with lightly doped emitter
11. Effect of basicity of glass frits on electrical properties of Si solar cells10.1016/j.solmat.2018.05.015 ↗
12. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
13. Effect of glass frit in Ag paste on the electrical properties of front-side Ag contacts for crystalline-silicon solar cells10.1039/C5RA11282F ↗
14. Rapid thermal processing of cost-effective contacts for silicon solar cells10.1002/pip.3119 ↗
15. Song
16. Effects of organic medium on rheological properties of silver pastes for crystalline silicon solar cells10.1108/CW-07-2015-0032 ↗
17. General control method of wettability and rheological properties of organic medium—a key material for electronic paste10.1021/acsaelm.0c00987 ↗
18. Vereinfachte und erweiterte Theorie der Randschicht-gleichrichter10.1007/BF01329843 ↗
19. Two-dimensional materials inserted at the metal/semiconductor interface: attractive candidates for semiconductor device contacts10.1021/acs.nanolett.8b01509 ↗
20. Graphene for true ohmic contact at metal–semiconductor junctions10.1021/nl402367y ↗
21. The impact of semimetal nanoparticles on the conduction of thick glass layer at Ag/Si contact interface10.1063/5.0001488 ↗