Nanometer-scale electrical potential imaging on absorber of CdSeTe solar cells
Source abstract
Abstract
We report on nm-scale electrical potential imaging throughout As-doped and Cu-doped CdSeTe absorbers using Kelvin probe force microscopy (KPFM). The potential imaging was conducted both laterally and vertically on beveled films using ion milling at small glancing angle. KPFM images electrical potential on the beveled surface and assesses defect charging in the subsurface region within a screening length from the beveled surface. We found that the grain boundaries were positively charged and that there were significant potential fluctuations in both grain boundary versus grain interior and intragrain. We further found that these potential fluctuations decreased significantly toward the front interface. Time of flight secondary ion mass spectrometry imaging shows that Se content increased toward the front interface, consistent with Se passivation of defects. The potential fluctuation was induced by defect charging, and the results elucidate different details of the defect configurations and grain structures of the films with different CdCl 2 treatment temperatures in the As-doped CdSeTe. The defect configurations in the region near the front interface can be a main factor contributing to the device performance difference. Our potential imaging provides insights about the defects throughout the absorber films, and shows that the potential fluctuation has a direct correlation to the V oc deficit.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
2. Passivation mechanism in CdTe solar cells: the hybrid role of Se10.1063/5.0058290 ↗
3. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
4. Enhanced performance of Se-alloyed CdTe solar cells: the role of Se-segregation on the grain boundaries
5. Understanding the copassivation effect of Cl and Se for CdTe grain boundaries10.1021/acsami.1c06587 ↗
6. Investigating the role of copper in arsenic doped Cd(Se,Te) photovoltaics10.1016/j.solmat.2022.111886 ↗
7. CdTe solar cells with open-circuit voltage breaking the 1 V barrier
8. Interface characterization of single-crystal CdTe solar cells with VOC > 950 mV10.1109/JPHOTOV.2016.2598274 ↗
9. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
10. As-doped CdSeTe solar cells achieving 22% efficiency with −0.23%/°C temperature coefficient10.1109/JPHOTOV.2022.3201479 ↗
11. Electrical potential investigation of reversible metastability and irreversible degradation of CdTe solar cells10.1016/j.solmat.2022.111610 ↗
12. Imaging hole-density inhomogeneity in arsenic-doped CdTe thin films by scanning capacitance microscopy10.1016/j.solmat.2020.110468 ↗
13. Intrinsic surface passivation of CdTe10.1063/1.4933186 ↗
14. Kelvin probe force microscopy10.1063/1.105227 ↗
15. Silicon pn junction imaging and characterizations using sensitivity enhanced Kelvin probe force microscopy10.1063/1.113780 ↗
16. Nanometer-scale surface potential and resistance mapping of wide-bandgap Cu(In,Ga)Se2 thin films10.1063/1.4907165 ↗
17. Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin films10.1063/1.1737796 ↗
18. Measurement of built-in electrical potential in III–V solar cells by scanning Kelvin probe microscopy10.1063/1.1573736 ↗
19. Radiative efficiency limits of solar cells with lateral band-gap fluctuations10.1063/1.1737071 ↗