journal article·2023-03

Tomography based pore-level structural optimization for reducing pressure drop of porous volumetric solar receiver

Chao Fan, Xin-Lin Xia, Yang Li, Xiuli Liu, Wei Du

Publisher page

Abstract

Porous solar receiver is the key component converting the solar energy to high-temperature thermal energy of working fluid. However, a large pressure drop brings additional energy consumption. In this work, an adjoint algorithm is employed to optimize the structure of tomographied porous solar receiver for reducing pressure drop. To this end, the flow and heat transfer characteristics of the porous receiver are analyzed and compared between the original and optimized receiver. The structural optimization is carried out with a pore-level method, which mainly consists of the incompressible Navier-Stokes equations and their adjoint counterpart. The results indicate that the pressure drop of the porous receiver decreased significantly after optimization with the porosity unchanged. In addition, although the solid skeleton temperature of the optimized foam is higher, the comprehensive efficiency η = h v/(Δ P) 1/3 does not decrease. Finally, it is found that under different inlet velocities between 1 and 5 m/s, the pressure drops of three samples ( φ = 0.87, 0.77 and 0.70) are reduced by 30%, 34% and 43% after optimization, respectively. The present work can provide useful guidance for improving the performance of porous volumetric solar receiver.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Heat Transfer Mechanisms · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Heat transfer analysis of porous media receiver with different transport and thermophysical models using mixture as feeding gas10.1016/j.enconman.2014.03.068 ↗
2. Effects of preheating and operation conditions on combustion in a porous medium10.1016/S0017-9310(02)00137-0 ↗
3. Tubular Si-infiltrated SiCf/SiC composites for solar receiver application–Part 2: thermal performance analysis and prediction10.1016/j.solmat.2015.04.034 ↗
4. Energy storage efficiency analyses of CO2 reforming of methane in metal foam solar thermochemical reactor10.1016/j.applthermaleng.2016.10.025 ↗
5. Modelling and testing of a solar-receiver system applied to high-temperature processes10.1016/j.renene.2014.11.075 ↗
6. Pressure drop through porous media10.1002/aic.690020117 ↗
7. Advances in theory of fluid motion in porous media10.1021/ie50720a004 ↗
8. Boundary and inertia effects on flow and heat transfer in porous media10.1016/0017-9310(81)90027-2 ↗
9. A comprehensive review on convective heat transfer of nanofluids in porous media: energy-related and thermohydraulic characteristics
10. Numerical simulations of fluid flow and heat transfer through aluminum and copper metal foam heat exchanger–A comparative study10.1080/01457632.2018.1546969 ↗
11. Theoretical investigation of entropy generation and heat transfer by forced convection of copper–water nanofluid in a porous channel—local thermal non-equilibrium and partial filling effects10.1016/j.powtec.2016.06.017 ↗
12. Coupled radiation and flow modeling in ceramic foam volumetric solar air receivers10.1016/j.solener.2011.06.030 ↗
13. Thermal performance analysis on a volumetric solar receiver with double-layer ceramic foam10.1016/j.enconman.2015.03.066 ↗
14. Analytical considerations of thermal radiation in cellular metal foams with open cells10.1016/j.ijheatmasstransfer.2007.10.010 ↗
15. Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications10.1016/j.apenergy.2009.08.009 ↗
16. Scale-integrated simulation of coupled radiation and convection in metal foam layer under high-flux irradiation10.1016/j.ijheatmasstransfer.2020.119367 ↗
17. Analysis of heat transfer and pressure drop through idealized open cell ceramic foams: comparison between Kelvin and weaire-phelan cell structures
18. Lord Kelvin and Weaire–Phelan foam models: heat transfer and pressure drop10.1115/1.4031700 ↗
19. Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver10.1016/j.energy.2017.08.062 ↗
20. Tomography-based investigation of flow and heat transfer inside reticulated porous ceramics10.1016/j.applthermaleng.2020.116115 ↗
21. Integrated simulation of continuous-scale and discrete-scale radiative transfer in metal foams10.1016/j.jqsrt.2018.04.001 ↗
22. Li · 2021
23. Thomas · 2004
24. Forced convective heat transfer in a channel filled with a functionally graded metal foam matrix
25. Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials10.1016/j.enconman.2015.07.064 ↗
26. Forced convective heat transfer of tubes sintered with partially-filled gradient metal foams (GMFs) considering local thermal non-equilibrium effect10.1016/j.applthermaleng.2018.03.074 ↗
27. Metal foams with graded pore size for heat transfer applications10.1002/adem.201200166 ↗
28. A. Mi, A. Nb, B. Wksc, A. Vn, The effects of variable porosity and cell size on the thermal performance of functionally-graded foams, Int. J. Therm. Sci., 160.
29. Numerical investigation on forced convection of tubes partially filled with composite metal foams under local thermal non-equilibrium condition10.1016/j.ijthermalsci.2018.06.014 ↗
30. Latent heat thermal storage with variable porosity metal matrix: a numerical study10.1016/j.renene.2018.03.030 ↗
31. Modeling and analysis of an efficient porous media for a solar porous absorber with a variable pore structure
32. Enhanced boiling heat transfer by gradient porous metals in saturated pure water and surfactant solutions10.1016/j.applthermaleng.2016.02.016 ↗
33. Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials10.1016/j.enconman.2015.07.064 ↗
34. Forced convective heat transfer of tubes sintered with partially-filled gradient metal foams (GMFs) considering local thermal non-equilibrium effect10.1016/j.applthermaleng.2018.03.074 ↗
35. Experiment and optimization study on the radial graded porous volumetric solar receiver matching non-uniform solar flux distribution10.1016/j.apenergy.2020.115343 ↗
36. Multi-objective genetic optimization of the heat transfer for tube inserted with porous media10.1016/j.ijheatmasstransfer.2016.05.118 ↗
37. Heat transfer and fluid flow for tube included a porous media: assessment and multi-objective optimization using particle swarm optimization (PSO) algorithm10.1016/j.physa.2019.123804 ↗
38. Optical and radiative properties analysis and optimization study of the gradually-varied volumetric solar receiver10.1016/j.apenergy.2017.05.165 ↗
39. Tomography based pore-level optimization of radiative transfer in porous media10.1016/j.ijheatmasstransfer.2011.06.017 ↗
40. Aerodynamic design via control theory10.1007/BF01061285 ↗
41. An introduction to the adjoint approach to design10.1023/A:1011430410075 ↗
42. Adjoint methods for car aerodynamics
43. Optimization of optical window of solar receiver by genetic algorithm combined with Monte Carlo ray tracing
44. Analytical modelling of the radiative properties of metallic foams: contribution of X-ray tomography10.1002/adem.200700334 ↗
45. Tomography-based analysis of apparent directional spectral emissivity of high-porosity nickel foams
46. Randrianalisoa · 2013 · 16
47. Monte Carlo determination of radiative properties of metal foams: comparison between idealized and real cell structures10.1016/j.ijthermalsci.2014.08.006 ↗
48. Pore-level numerical analysis of the infrared surface temperature of metallic foam10.1016/j.jqsrt.2017.06.004 ↗
49. Integrated simulation of continuous-scale and discrete-scale radiative transfer in an open-cell foam made of semitransparent absorbing-scattering ceramics10.1016/j.jqsrt.2018.12.039 ↗
50. Numerical analysis of radiation propagation in a multi-layer volumetric solar absorber composed of a stack of square grids10.1016/j.solener.2015.04.047 ↗
51. Numerical analysis of radiation attenuation in volumetric solar receivers composed of a stack of thin monolith layers10.1016/j.egypro.2014.10.199 ↗
52. On the proper treatment of grid sensitivities in continuous adjoint methods for shape optimization10.1016/j.jcp.2015.08.012 ↗
53. Adjoint optimization of 2D-AIRFOILS in incompressible flows
54. Sihvo · 2014
55. Continuous adjoint methods for turbulent flows, applied to shape and topology optimization: industrial applications10.1007/s11831-014-9141-9 ↗
56. On the proper treatment of grid sensitivities in continuous adjoint methods for shape optimization10.1016/j.jcp.2015.08.012 ↗
57. A discrete adjoint model for OpenFOAM10.1016/j.procs.2013.05.206 ↗
58. Pressure drop correlation for ceramic and metal sponges10.1016/j.ces.2012.02.047 ↗
59. Naso · 2016
60. Pressure drop modeling on SOLID foam: state-of-the art correlation10.1016/j.cej.2008.06.007 ↗